Spacers for correct installation (3 pieces)
Lieske Part No.: 609922

Plastering rail 2500 mm for precise installation of the light line (1 piece)
Lieske Part No.: 609980

Mounting bracket for installation in plasterboard ceilings (2 pieces)
Lieske Part No.: 609969

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 6150 x 65 x 1 mm Weight: 1.2 kg
Lieske Part No.: 685509

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 685177

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for the WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1000 x 84 x 2 mm Weight: 0.7 kg
Lieske Part No.: 688134

Lieske Part No.: 889626

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1996 x 84 x 2 mm Weight: 1.3 kg
Lieske Part No.: 688149

End cap set made of plastic in white. End cap set is not included in the scope of delivery of the TECON C LED WW Wallwasher. Weight: 0.1 kg
Lieske Part No.: 688160

Rope suspension for the ONDARIA LED product family. Accessories consisting of 3 ropes, 2000 mm long, terminal connection, retaining plate and ceiling rosette, diameter 191 mm x 36 mm, made of white plastic. Supply cables are not included and must be ordered separately. Minimum mounting height: 400 mm (D590/D870) or 800 mm (D1150). Weight: 0.8 kg
Lieske Part No.: 688775

Studded tape for fixing the cover in the middle of light strip configurations on both sides and in the corner of configurations with corner element (2 pieces each 30cm)
Lieske Part No.: 689486

Rope suspension for the ONDARIA LED product family. Accessories consisting of 3 ropes, 4000 mm long, terminal connection, retaining plate and ceiling rosette, diameter 191 mm x 36 mm, made of white plastic. Supply cables are not included and must be ordered separately. Minimum mounting height: 400 mm (D590/D870) or 800 mm (D1150). Weight: 0.2 kg
Lieske Part No.: 415576

Knife for cutting the cover (1 piece)
Lieske Part No.: 685532

Optik roller for simplified installation of the cover (1 piece)
Lieske Part No.: 685573

Cutting template for simplified cutting of the cover (1 piece)
Lieske Part No.: 689393

Rope suspension including ceiling rosette and strain relief for suspension height 2000 mm.
Lieske Part No.: 1345872

Connectors including cables, screws and strain reliefs for suspension height 2000 mm.
Lieske Part No.: 1345871

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 10000 x 38 x 1 mm Weight: 2 kg
Lieske Part No.: 640937

Light strip connector for simplified connection of channels in the light strip. Consists of 2 fixing plates, which are inserted into the side of the profile, and a connector element.
Lieske Part No.: 625890

Cover on the roll made of polycarbonate (PC) classified according to TP(a) for SLOTLIGHT infinity Office. Transparent cover with two films for better glare control UGR<19 and 65°<3000 cd/m². Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 420320

Lieske Part No.: 365159

Steel cable suspension (set) with compensating eccentric for balancing, for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-H, consisting of: suspension canopy in white, steel cable, compensating eccentric and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 2096157

Steel cable suspension (set) for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-U, consisting of: suspension canopy in white, steel cable and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 1341346

Cover cap set with 3 cover caps each for SUPERSYSTEM outdoor in microstructure paint in charcoal, matt. Weight: 0.02 kg
Lieske Part No.: 2088869

Mounting bracket for installation in plasterboard ceilings (2 pieces)
Lieske Part No.: 631663

Mounting discs.(5 pieces)
Lieske Part No.: 2088865

Chain suspension (2 pieces) including fastening hooks for attaching the SLOTLIGHT Inifinty BWS light
Lieske Part No.: 2089553

Mounting accessories for rope suspension of the RESCLITE PRO IP65 surface-mounted luminaire, stepless height adjustment up to a maximum length of 5 m. Fine adjustment using adjusting sleeve
Lieske Part No.: 2090547

1 piece wall mounting bracket in black including mounting spring for SLOTLIGHT Infinity attachment (SLOIN A) and direct/indirect (DI/ID) types as well as EQL for horizontal mounting on the wall. Maximum weight per wall mounting bracket is 15kg.
Lieske Part No.: 2089552

Cover on the roll made of polycarbonate (PC) according to the NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 45 mx 38 mm x 1 mm. Weight: 8 kg
Lieske Part No.: 2089548

Cover on the roll made of polycarbonate (PC) according to the NORM according to TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 50 mx 38 mm x 1 mm. Weight: 8.9 kg
Lieske Part No.: 2089549

Mounting set in white for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 1 ceiling fastening element, 2 suspension cables in length 1200 mm white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 1104950

Mounting set in white for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in white, 1 ceiling fastening element, 2 suspension cables in length 3100 mm white, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 1104949

Black electrical feed made of profiled sheet steel for the electrical connection of the light strip. Plug-in connection terminals for 5 power cables, 2 x 2 emergency lighting cables and 2 control cables. Contact protection for current conducting profile and end caps included. Dimensions: 344 x 63 x 56 mm, weight: 0.68 kg
Lieske Part No.: 1104935

Support rail made of profiled sheet steel in black. 11 conductors embedded in an integrated current conducting profile. 5 power cables (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as a control cable. Tool-free connection via electrical feed-in set. Dimensions: 4001 x 69 x 60 mm, weight: 6.9 kg
Lieske Part No.: 1104936

Socket element in black: 250mm long, fused with 6.3 amps. Weight: 0.25 kg
Lieske Part No.: 2090572

Cover strip for the mounting rail or cable duct made of plastic polypropylene in black. Dimensions: 1498 x 46 x 10 mm Weight: 0.1 kg
Lieske Part No.: 2090595

Cover strip for the mounting rail or cable duct made of plastic polypropylene in black. Dimensions: 1997 x 46 x 10 mm Weight: 0.14 kg
Lieske Part No.: 2090596

End caps made of polycarbonate (PC) in white for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090592

End caps made of polycarbonate (PC) in silver for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090591

End caps made of polycarbonate (PC) in black for cover strips. For uninterrupted light strips, one pair of end caps is required per light strip. Weight: 0.1 kg per pair
Lieske Part No.: 2090590

2 pcs. end caps made of aluminum, black powder-coated including fastening screws.
Lieske Part No.: 1104937

Mounting set in silver for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in silver, 1 ceiling fastening element, 2 suspension cables in length 1200 mm silver, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 2090508

Mounting set in silver for CLARIS evolution. Complete set for single light and the first light for light strip mounting. Consists of 1 ceiling canopy in silver, 1 ceiling fastening element, 2 suspension cables in length 3100 mm silver, 1 strain relief, 4 connection terminals, 1 transparent connection cable, 5x1.5mm2 (not halogen-free).
Lieske Part No.: 2090509

Cable suspension with loop (diameter: 6 mm) for tool-free connection of the support rail using CLIX technology. Fastening spring made of stainless spring steel V2A. Cable made of galvanized steel. Continuously variable height adjustment. The cable can be cut to length. Maximum tensile load 30 kg. Dimensions of fastening spring: 28 x 42 x 9 mm. Dimensions: diameter 2 x 2000 mm. Weight: 0.09 kg
Lieske Part No.: 2091216

Cable suspension with loop (diameter: 6 mm) for tool-free connection of the support rail using CLIX technology. Fastening spring made of stainless spring steel V2A. Cable made of galvanized steel. Continuously variable height adjustment. The cable can be cut to length. Maximum tensile load 30 kg. Dimensions of fastening spring: 28 x 42 x 9 mm. Dimensions: diameter 2 x 5000 mm. Weight: 0.13 kg
Lieske Part No.: 1598092

Mounting accessories for wall mounting of the RESCLITE PRO IP65 surface-mounted luminaire with escape, escape 90°, antipanic or spot lens. Distance of the lens from the wall: 40 cm. Optimum mounting height for spot optics for lighting fire extinguishers and first aid facilities: 2.2 to 3.5 meters.
Lieske Part No.: 2091192

Installation set for ONDARIA LED round with a diameter of 400mm. Accessories consisting of installation frame for concealing the ceiling recess, cable suspension for mounting on the bare ceiling, sealing ring for a clean shadow gap, aid for disassembly. Weight: 0.3 kg
Lieske Part No.: 1597768

Cover frame for mounting on RESCLITE and VOYAGER Star recessed luminaires, in combination with the RESCLITE PRO wall-mounted version (MRWR) also suitable for installation in the square wall cut-out of RESCLITE C wall-mounted luminaires, die-cast aluminium, dimensions: 90 x 90 x 4 mm, black
Lieske Part No.: 1597780

Fastening and feed set for pendant ECOOS II / ECOOS II slim single light or for the first light in the light strip. Set consists of: 1 ceiling rosette in white, 1 ceiling fastening element in white, 1 transparent feed cable, 4 clamps, 2 steel suspension cables 1m long, 2 Y-cable connectors. 1 set required for a single light or per light strip.
Lieske Part No.: 1778791