10 year block battery, type VLRA, sealed, rechargeable 10 year design life at 20° ambient temperature High performance grid plates (lead/calcium) Fleece technology ABS housing and cover Recessed poles with copper core, screwable inside Extremely low gassing, low self-discharge No transport restrictions 100% recyclable Maintenance-free over the entire service life The battery pack must not be stored without a battery charge for longer than 2 months after delivery. The battery pack must be connected to the system after 2 months at the latest. If these instructions are not followed, any liability or warranty claims will be rejected.
Lieske Part No.: 453464

TP-NetCom software license for direct Ethernet connection and use of third-party touch panels to a LITENET lighting management system, enables data query and control via one or more third-party touch panels, query and control takes place in ASCII plain text data format, extensive and open protocol, detailed LITENET TP-NetCom manual.
Lieske Part No.: 908621

Universal Input 4x enclosure with four from each independently addressable inputs for integrating conventional sensors, switches, motion detectors, timers or other contactor in a busgeführtes light and space management system. Free configuration possible by authorized service personnel. Depending on the addressing of an input all the actuators of a room or space of an actuator group can be controlled. Input Voltage 230V AC, 50/60Hz, for mounting on 35mm DIN rail according to EN 50022, Size 4 TE à 17.5 mm, material flame retardant polycarbonate, halogen-free, light gray. Bus and mains cable to the inputs of the device screw. Contactor designed for screw mounting for at least 230VAC, leads to the inputs of the device.

Type: 22154732
Quantity: 1 unit.
Lieske Part No.: 315393

L-connector white. Dimensions: 135mm x 365mm x 60mm. Weight: 1.62 kg Type: 22,157,274


Quantity: 1 unit.
Lieske Part No.: 328209

T-connector white. Dimensions: 500mm x 365mm x 60mm. Weight: 2.18 kg Type: 22,157,279


Quantity: 1 unit.
Lieske Part No.: 655001

Suspension type: 22
57562 item:
ST.
Lieske Part No.: 925869

Strain relief made of galvanized sheet steel, with integrated device for clamping the feed cables.
Lieske Part No.: 926833

Package: Silver control unit, bus supply, flexible and cost-effective scene lighting control, for controlling up to 64 DALI-compatible operating devices. Package consists of control unit and power supply. Control unit: with circularly aligned buttons for calling up three lighting scenarios. Central, illuminated come/go button and two rocker switches, to which two lighting groups are assigned. Housing and buttons are made of silver plastic, satin finish, dimensions: 87 x 87 x 13 mm. Easy installation in on-site single socket. Supply via DALI control line (no mains connection), current consumption 6mA (3 DALI loads). Power supply: for up to 64 participants or 100 DALI loads (max. 200mA). Short-circuit and voltage-proof against 230/240V external voltage. Made of flame-retardant polycarbonate, halogen-free. Installation in cable ducts or ceiling recess, permissible ambient temperature: 0°C to +50°C. Protection class IP20, dimensions: 101.5 x 29.5mm.
Lieske Part No.: 547549

Digital output device to the control of two separate lighting groups. Two control outputs each individual, automatic switching for DSI and DALI compatible lamp ballasts. Maximum of 25 per DALI or DSI ballasts per output 5 channel. Mittles verpolbarer two-wire connection control cable and standard installation materials. Dimming range:
to
%.The lighting controller has a built-
ampere relay, which optionally with disabled lamp ballasts this is the lamp additionally stress-free devices. On the input side connection for commercial light-single or double switch, optional connection for light key value, optional connection for 23 volt motion. Optional accessories can not be integrated without addressing and commissioning: light sensor, infrared sensor for IR remote control, scene control device, input module for switch integration and presence detectors. The connections are made ​​via screw terminals. Housing in cabinet design made ​​of flame-retardant polycarbonate, halogen free, gray (RAL 7 4), suitable for mounting on 35mm DIN rail according to EN 5 22 protection IP2, with status LED and test button, ambient temperature to 5 ° C Type: 22
6
822 sales unit:
ST.
Lieske Part No.: 751296

DALI/DSI control unit installation for simultaneous control of up to 25 DALI or DSI compatible lamp operating devices, dimming range 1 to 100%, two-wire control cable on the output side, polarity can be reversed, use of standard installation material. On the input side, connection option for commercially available single or double light buttons, optional connection option for scene buttons, optional connection option for motion detectors, connections are made via plug-in terminals, housing made of polycarbonate (PC), flame-retardant, halogen-free, suitable for luminaire installation or ceiling installation, protection class IP20, protection class II with mounted strain relief. Dimensions: 281 x 50 x 21 mm, weight: 0.14 kg
Lieske Part No.: 946770

DALI/DSI daylight/presence control device for the simultaneous control of two groups of lights depending on the amount of daylight in the room. A sensor detects the outside brightness and uses control characteristics to determine the correct dimming level of the groups of lights. Up to 25 DALI or DSI compatible lamp control devices per output channel, dimming range 1 to 100%, connections are made via plug-in terminals, housing made of polycarbonate (PC), flame-retardant, halogen-free, suitable for luminaire installation or ceiling installation, dimensions: 281 x 50 x 21 mm, weight: 0.14 kg
Lieske Part No.: 741527

Elliptical canopy with 5 single-pole terminals in white made of plastic polycarbonate (PC) with clamping options.
Lieske Part No.: 377195

Installation frame for ARTSIGN 75 P MRC (ceiling installation) safety sign lights. As edge protection for plasterboard or fibreboard with a ceiling thickness of approx. 12.5 mm. Galvanized sheet steel, installation on the rear, fastening by gluing or screwing, cut-out dimensions: 180+/-2 x 49+/-1 mm, dimensions: 260 x 70 x 13 mm, weight: 0.09 kg
Lieske Part No.: 1439120

Installation frame for ARTSIGN 75 P MRC (recessed ceiling) safety sign lights. Installation with edge upwards so that the ARTSIGN can be installed on ceilings with a thickness of 1 to 12 mm. Installation with edge downwards: as edge protection for plasterboard or fiberboard with a ceiling thickness of approx. 25 mm. Galvanized sheet steel, installation on the back, fastening by gluing or screwing, cut-out dimensions: 180+/-2 x 49+/-1 mm, dimensions: 260 x 70 x 25 mm, weight: 0.12 kg
Lieske Part No.: 2095491

Concrete casting housing, galvanized sheet steel, for mounting the ARTSIGN ED in concrete ceilings or with subsequent plastering. Prepared for pipe installation. Protection type: IP40. Protection class: SC1, dimensions: 182 x 93 x 114 mm, weight: 0.5 kg.
Lieske Part No.: 378460

Rope suspension for mounting the CUBESIGN safety sign light. Continuous height adjustment up to 5 m possible.
Lieske Part No.: 373057

Concrete casting housing, galvanized sheet steel, for mounting the PURESIGN/COMSIGN ED in concrete ceilings. Prepared for pipe installation. Dimensions: 400 x 83 x 85 mm, weight: 0.68 kg.
Lieske Part No.: 873380

Connectors including cables, screws and strain reliefs for suspension height 1000 mm.
Lieske Part No.: 653217

Rope suspension including ceiling rosette and strain relief for suspension height 1000 mm.
Lieske Part No.: 653204

Lieske Part No.: 365172

Spacers for correct installation (3 pieces)
Lieske Part No.: 609922

Plastering rail 2500 mm for precise installation of the light line (1 piece)
Lieske Part No.: 609980

Mounting bracket for installation in plasterboard ceilings (2 pieces)
Lieske Part No.: 609969

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 6150 x 65 x 1 mm Weight: 1.2 kg
Lieske Part No.: 685509

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 685177

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for the WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1000 x 84 x 2 mm Weight: 0.7 kg
Lieske Part No.: 688134

Lieske Part No.: 889626

CG surface-mounted optics made of white powder-coated aluminum, consisting of two reflector wings to reduce the UGR value: High-efficiency UGR < 19 and high-output UGR < 22 are achieved. The CG optics are optimized for WideBeam lights. Mounting aid for CG surface-mounted optics using an add-on clip on the end caps of the LED lights. Dimensions: 1996 x 84 x 2 mm Weight: 1.3 kg
Lieske Part No.: 688149

End cap set made of plastic in white. End cap set is not included in the scope of delivery of the TECON C LED WW Wallwasher. Weight: 0.1 kg
Lieske Part No.: 688160

Rope suspension for the ONDARIA LED product family. Accessories consisting of 3 ropes, 2000 mm long, terminal connection, retaining plate and ceiling rosette, diameter 191 mm x 36 mm, made of white plastic. Supply cables are not included and must be ordered separately. Minimum mounting height: 400 mm (D590/D870) or 800 mm (D1150). Weight: 0.8 kg
Lieske Part No.: 688775

Studded tape for fixing the cover in the middle of light strip configurations on both sides and in the corner of configurations with corner element (2 pieces each 30cm)
Lieske Part No.: 689486

Rope suspension for the ONDARIA LED product family. Accessories consisting of 3 ropes, 4000 mm long, terminal connection, retaining plate and ceiling rosette, diameter 191 mm x 36 mm, made of white plastic. Supply cables are not included and must be ordered separately. Minimum mounting height: 400 mm (D590/D870) or 800 mm (D1150). Weight: 0.2 kg
Lieske Part No.: 415576

Knife for cutting the cover (1 piece)
Lieske Part No.: 685532

Optik roller for simplified installation of the cover (1 piece)
Lieske Part No.: 685573

Cutting template for simplified cutting of the cover (1 piece)
Lieske Part No.: 689393

Rope suspension including ceiling rosette and strain relief for suspension height 2000 mm.
Lieske Part No.: 1345872

Connectors including cables, screws and strain reliefs for suspension height 2000 mm.
Lieske Part No.: 1345871

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 10000 x 38 x 1 mm Weight: 2 kg
Lieske Part No.: 640937

Light strip connector for simplified connection of channels in the light strip. Consists of 2 fixing plates, which are inserted into the side of the profile, and a connector element.
Lieske Part No.: 625890

Cover on the roll made of polycarbonate (PC) classified according to TP(a) for SLOTLIGHT infinity Office. Transparent cover with two films for better glare control UGR<19 and 65°<3000 cd/m². Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 420320

Lieske Part No.: 365159

Steel cable suspension (set) with compensating eccentric for balancing, for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-H, consisting of: suspension canopy in white, steel cable, compensating eccentric and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 2096157

Steel cable suspension (set) for pendulum mounting of the low-voltage power rail profile SUPERSYTEM-U, consisting of: suspension canopy in white, steel cable and patented hanger with holder for stepless height adjustment, to be inserted into the profile grooves, steel cable length 2000mm, maximum tensile load: 20kg, Note: steel cable suspension required every 2000mm!
Lieske Part No.: 1341346

Cover cap set with 3 cover caps each for SUPERSYSTEM outdoor in microstructure paint in charcoal, matt. Weight: 0.02 kg
Lieske Part No.: 2088869

Mounting bracket for installation in plasterboard ceilings (2 pieces)
Lieske Part No.: 631663

Mounting discs.(5 pieces)
Lieske Part No.: 2088865

Chain suspension (2 pieces) including fastening hooks for attaching the SLOTLIGHT Inifinty BWS light
Lieske Part No.: 2089553

Mounting accessories for rope suspension of the RESCLITE PRO IP65 surface-mounted luminaire, stepless height adjustment up to a maximum length of 5 m. Fine adjustment using adjusting sleeve
Lieske Part No.: 2090547

1 piece wall mounting bracket in black including mounting spring for SLOTLIGHT Infinity attachment (SLOIN A) and direct/indirect (DI/ID) types as well as EQL for horizontal mounting on the wall. Maximum weight per wall mounting bracket is 15kg.
Lieske Part No.: 2089552

Cover on the roll made of polycarbonate (PC) according to the NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 45 mx 38 mm x 1 mm. Weight: 8 kg
Lieske Part No.: 2089548