Versions in Accessories

For downlight installation in modular ceilings and closed ceilings with low load-bearing capacity. Accessories for use in modular ceilings, module 625. For luminaire type Inplana C09... . Made of sheet steel, Sendzimir galvanized. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1344788

Mast clamp made of stainless steel. For luminaire type Faciella.
Lieske Part No.: 1352044

Accessories for installing lights in panel ceilings (module 100). Suitable for Solvan Flow C1/D1 recessed lights. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346706

Accessories for installing lights in panel ceilings (module 100). Suitable for recessed lights Solvan Flow C2/C3, D2/D3. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346705

Lieske Part No.: 876851

3-point cable suspension with transparent power cable and white ceiling connection box. With 3-pole connection cable 3 x 0.75 mm2. For suspension lengths up to 2000 mm. Accessories for Onplana D07... . Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 214790

Mast attachment made of welded, hot-dip galvanized steel tube for mounting 2 side-mounted lights. For masts with mast top Ø 76 mm. Supporting piece Ø 60 x 200 mm, angle of inclination 5°. With plastic cover similar to RAL 7032, pebble gray. Fastened to the mast using 2 x 3 mounted hexagon socket screws M 8x12 (SW 4 mm) made of stainless steel. For the Cuvia, Lumega IQ, Lumega series, an additional reducer 0970/60 is required for each light.
Lieske Part No.: 643188

Ceiling mounting accessories, 2-part. For LED high bay spotlights Mirona Fit 2L/4L/8L. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 176921

Adjustable wall mounting bracket, 2-part. For LED high bay spotlights Mirona Fit 2L/4L. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 1351877

Chain suspension set for LED high bay light Mirona Fit. With 2 chains 1200mm each, carabiners, turnbuckles and ceiling mounting plates. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 638540

Lieske Part No.: 713101

Mains connection cable for pendant lights type: Solvan Flow H...ETDD / ...ET+EB3. Pendant light, direct-indirect light distribution. 5-core version, Ø 1.5 mm2. Cable length 2000 mm. With integrated snap-in strain relief. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346247

Head pieces made of PMMA. For LED surface-mounted and suspended luminaires Solvan Flow D/H. For individual luminaires and light strip ends. Color white. Delivery includes 2 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 450158

Head pieces made of PMMA. For LED surface-mounted and hanging luminaires Solvan Flow D/H. For individual luminaires and light strip ends. Color: silver-gray. Delivery includes 2 pieces. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1346245

Lieske Part No.: 353586

Lieske Part No.: 353612

Steel band suspension, 1 pair, rustproof, 1.0 m long, for damp room luminaires.
Lieske Part No.: 628373

Mounting accessories for Nextrema 4000-8... / 6000-8... /Olexeon/Oleveon Fit/Aragon Fit/. Bracket for suspended mounting. Accessories available for 10 years after the invoice date, subject to reasonable modifications in the interests of improvement.
Lieske Part No.: 1346439

Accessory set for achieving protection class IP 54 when mounted on the ceiling. Specifically for lights from the Onplana D07 series. Consists of a replacement cover with an embedded seal for the ceiling finish and a sealing ring for use between the light head and the surface-mounted housing. Made of sheet steel, powder-coated white. Outside diameter 234 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1186931

Ceiling connection box, square, white. For connecting the power supply to ceiling outlets. Dimensions (L x W): 132.8 mm x 67.2 mm, height 30.6 mm.
Lieske Part No.: 1349820

Ceiling connection box, square, silver-grey. For connecting the power supply to ceiling outlets. Dimensions (L x W): 132.8 mm x 67.2 mm, height 30.6 mm.
Lieske Part No.: 1350305

Ceiling connection box, square, white. With integrated light management module LiveLink WLAN controller. For connecting the power supply cable to ceiling outlets. Dimensions (L x W): 361 mm x 67.2 mm, height 31 mm.
Lieske Part No.: 1350297

Rope suspension for suspension lengths up to: 2000 mm. For lights from the Luceo Slim series. Weight 0.1kg.
Sales unit: 1 ST.
Lieske Part No.: 1350265

Y-cable suspension for suspension lengths up to: 2000 mm. For pendant lights from the Luceos series. Dimensions (L x W): 160 mm x 120 mm, H = 20 mm. Packaging unit 1 piece, for one suspension point. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1350257

Pendant set for suspended installation For switchable lights. (3 x 0.75 mm2). For suspension lengths up to 3000 mm. Consists of a white ceiling canopy, a transparent power cable and a 3-point cable suspension with fastening pieces (RAL 9016). Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1002953

Pendant set for suspended installation For switchable lights. (3 x 0.75 mm2). For suspension lengths up to 6000 mm. Consists of a white ceiling canopy, a transparent power cable and a 3-point cable suspension with fastening pieces (RAL 9016). Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1002966

Ceiling mounting system for luminaires from the Luceos series. The ceiling mounting system already includes a connection head piece. The second head piece must be ordered separately. For ceiling mounting luminaires from the Luceos D2 series. Made of sheet steel, white powder-coated. Dimensions (L x W): 1515 mm x 239.5 mm, H = 35 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1951249

Installation accessories for Actison Fit lights in sawn ceilings (310 mm). Sheet steel, powder-coated, white. Ceiling cutout 1555 mm x 335 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1102600

Standpipe for bollard light. For use in the modular LED bollard light system 8841/8851. With safety socket 230 V, 16 A. The safety socket is equipped with increased contact protection. Height 836.5 mm, outer diameter 170 mm. Color anthracite, similar to DB703 with metallic effect, highly weatherproof, powder-coated. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interest of progress.
Lieske Part No.: 1593606

Casting housing with fastening set for flush installation of the Invego Square W2 wall light. A special tool for removing the light is included in the delivery.
Lieske Part No.: 1866258

Casting housing with fastening set for flush installation of the Invego wall light Circ W2. A special tool for removing the light is included in the delivery.
Lieske Part No.: 1866278

Casting housing with fastening set for flush installation of the Invego wall light Rec W1. A special tool for removing the light is included in the scope of delivery.
Lieske Part No.: 1866253

Tool for quickly and safely dismantling the recessed downlight and separating the reflector from the rest of the luminaire body. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 1868622

Installation frame for installing M73 recessed lights in M84 ceilings with concealed support rails. Also suitable in combination with M73 recessed lights for installation in sawn ceilings. Required ceiling thickness 15 - 60 mm. Surface coated in white (RAL 9016). Please note installation instructions. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1868617

Truss attachment for Jovie 50/70 top-mounted light with mast attachment MB D60.... Spigot size Ø 60 mm. Version with 15° tilt angle. Made of hot-dip galvanized steel. With stainless steel fastening material (M12 x 40). The truss attachment is used to accommodate a mast attachment Z MB and can be mounted on suitable objects in a variety of ways. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2131521

Suspension accessories for luminaires of the series: 2330 M73/M84... G3 .
Lieske Part No.: 2039297

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D1/H1 and lamp D1/H1 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D1/H1 with dummy module D/H (BL) L60 or L75. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053491

Through-wiring made of heat-resistant individual cables. For use in combination with lamp D2/H2 and lamp D2/H2 as well as lamp D2/H2 with coupling (ZLK SAN) D/H1 or D/H2 and lamp D2/H2 with dummy module D/H (BL) L60 or L75 or L150 as well as in combination with lamp D1/H1 with dummy module D/H (BL) L150. For use in combination with lamp D1/H1 and lamp D2/H2. With this combination, the through-wiring must be cut to length. 3-core version, Ø 1.5 mm2. Packaging unit 1 set. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053492

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053494

Transparent power cable with integrated snap-in strain relief. 3-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053495

Transparent power cable with integrated snap-in strain relief. 5-core version, Ø 1.5 mm2. Cable length 1000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 1053496

Transparent power cable with integrated snap-in strain relief. 7-core version, Ø 1.5 mm2. Cable length 2000 mm. Packaging unit consisting of 1 piece. Width 130 mm, height 150 mm. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2092885

Y-cable suspension for suspension lengths up to: 2000 mm. Packaging unit consisting of 1 piece. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 1053499

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M84... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 622 mm x 622 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2051735

Mounting frame for ceiling mounting. For use in combination with a luminaire from the series: ArimoFit G2 M59... . Made of sheet steel, white powder-coated (RAL 9016). Dimensions (L x W): 1547 mm x 310 mm, H = 57 mm. For flush mounting in the ceiling. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 2062580

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M84 G2 / M57 G2 series.
Lieske Part No.: 2051738

Mounting accessories for installation in sawn ceiling openings. For luminaires from the Arimo Fit M59 G2 series.
Lieske Part No.: 2062581

End cap made of thermoplastically fused ASA / TPE with a high-quality, matt surface structure and surface quality in accordance with VDI30. For protection class-compliant power supply (IP66), the end cap is equipped with 3 self-sealing membranes for cable cross-sections 7 mm - 13 mm and 3 pre-stamped power supply points for PG screw connections (M20 / M25). For replacement or exchange. Packaging unit 2 pieces. Color light gray. Module length 75 mm. Accessories available 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 2037159

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C07 series... . For ceiling cutouts Ø 220 -250 mm.
Lieske Part No.: 2069758

Renovation plate for covering existing ceiling cutouts in renovation applications. For round downlights of the 2325 G3 C05... series. For ceiling cutouts Ø 160 -200 mm.
Lieske Part No.: 2069757