Glass, pressed glass
Lieske Part No.: 138830

BEGA connection column 13577 with earth spike, portable, for use in private areas. Built-in components: 2 earthed sockets 13 A, 250 volts. Plug type G: system widely used in Great Britain (Commonwealth plug). Protection class IP 44. Housing and earth spike made of plastic (polyamide), glass fiber reinforced, graphite color. With permanently connected connection cable H07RN-F 3 G 1.5 mm², length 5 m, with plug. Dimensions: 75 x 125 mm. Height above floor 160 mm.
Lieske Part No.: 644493

BEGA UniLink® garden light 84918K3, portable, for use in private areas. Unshielded light. LED, 2.9 W luminaire connected load, luminaire luminous flux 245 lm, color temperature 3000 K. Color rendering index (CRI) > 80. With replaceable BEGA LED module with overtemperature protection and a service life of at least 50,000 operating hours. 20-year guarantee on the LED module and wearing parts. With BEGA Ultimate Driver® LED power supply 220-240 V, 50/60 Hz. Protection class IP 65. Housing and ground spike made of plastic (polyamide), glass fiber reinforced, color graphite. Hand-blown opal glass with thread. Ready for connection with 5 m connection cable X05RN-F FEP 2 x 1 qmm + 1G2.5 qmm and plug connection. Lamp diameter 150 mm, height 260 mm.
Lieske Part No.: 672356

BEGA UniLink® garden light 84919K3, portable, for use in private areas. Unshielded light. LED, 2.9 W luminaire connected load, luminaire luminous flux 236 lm, color temperature 3000 K. Color rendering index (CRI) > 80. With replaceable BEGA LED module with overtemperature protection and a service life of at least 50,000 operating hours. 20-year guarantee on the LED module and wearing parts. With BEGA Ultimate Driver® LED power supply 220-240 V, 50/60 Hz. Protection class IP 65. Housing and ground spike made of plastic (polyamide), glass fiber reinforced, color graphite. Hand-blown opal glass with thread. Ready for connection with 5 m connection cable X05RN-F FEP 2 x 1 qmm + 1G2.5 qmm and plug connection. Lamp diameter 70 mm, height 340 mm.
Lieske Part No.: 672360

BEGA UniLink® garden light 84920K3, portable, for use in private areas. Unshielded light. LED, 2.9 W luminaire connected load, luminaire luminous flux 186 lm, color temperature 3000 K. Color rendering index (CRI) > 80. With replaceable BEGA LED module with overtemperature protection and a service life of at least 50,000 operating hours. 20-year guarantee on the LED module and wearing parts. With BEGA Ultimate Driver® LED power supply 220-240 V, 50/60 Hz. Protection class IP 65. Housing and ground spike made of plastic (polyamide), glass fiber reinforced, color graphite. Hand-blown opal glass with thread. Ready for connection with 5 m connection cable X05RN-F FEP 2 x 1 qmm + 1G2.5 qmm and plug connection. Lamp diameter 65 mm, height 270 mm.
Lieske Part No.: 672362

Additional housing for CrystalWay 20 m for additional space for wiring and cable entry
Lieske Part No.: 1425825

Additional house telephone UTOPIA for set 1122/31
Lieske Part No.: 903680

for label field 9 x 58 mm
Lieske Part No.: 644382

for label field 12 x 55 mm
Lieske Part No.: 483456

Pendant tube suspension for spotlights with track adapter, with additional mechanical fastening for Eutrac 3-phase track, Material: sheet steel
Standards: CE, RoHS
Outside diameter: 13 mm
Length: 500 mm
Weight: 0.180 kg
Lieske Part No.: 599535

Wire rope suspension 1-way for CAP (L = 5000 mm), height adjustable, inner diameter eyelet = 10 mm, ceiling fastener for screw mounting
Standards: CE, RoHS
Length: 5000 mm
Weight: 0.040 kg
Lieske Part No.: 761219

Suspension with steel chain for CAP (L = 2500 mm), ceiling mounting of choice
Standards: CE, RoHS
Length: 2500 mm
Weight: 0.380 kg
Lieske Part No.: 272890

Flexible recessed spotlight system consisting of recessed housing and light heads including operating devices (order light heads separately), square recessed housing 4-flame made of sheet steel (inner housing black), selected light heads are fully assembled in the factory, easy ceiling installation via adjustable clamping wings (variable ceiling thickness)
Standards: CE, RoHS
Ceiling thickness: 1 - 35 mm
Installation depth: 140 mm
Cut-out size: 340 x 340 mm
Dimensions (LxWxH): 363 x 363 x 143 mm
Weight: 3,570 kg
Lieske Part No.: 868731

Product advantages: High radiance. High radiation output in the UV and visible range. Product properties: Multi-line spectrum. Areas of application: Fluorescence microscopy. UV curing. Wide variety of light guide applications.
Sales unit: 10 pieces
Lieske Part No.: 202173

Typ 5520
Lieske Part No.: 100266

Typ 5521
Lieske Part No.: 1002668

Structural accessories for SDT Basic, KE-Y > 0mm and 2x for THLA+SDTT. Luminaire hanger for fastening luminaires with a cable run outside the center of the luminaire KE-Y > 0mm.
Lieske Part No.: 263867

Electrical accessories 5x0.75mm² for stail SHL. Through-wiring set 5x0.75mm². for stail SHL..
Lieske Part No.: 600188

Sheet steel housing, rectangular cross-section, front sides made of plastic with integrated light strip connector, direct light distribution using a reflection-enhanced aluminum parabolic louvre with a satin finish, for computer workstations, 65° < 1000 cd/m² all-round glare control in accordance with the current standard DIN-EN 12464-1, self-locking, foldable on both sides, optically continuous louvre when light strip is installed. Light color neutral white (840) with very good color consistency and high color rendering Ra=80, electrical connection via 3-pin connection terminal with plug-in contact technology.
Lieske Part No.: 809089

Sheet steel housing, rectangular cross-section, end faces made of plastic with integrated light strip connector, direct light distribution, glare control through diffusely radiating, satin-finished PC profile, optically continuous diffuser when light strip is installed, light color neutral white (840) with very good color consistency and high color rendering Ra=80, electrical connection via 3-pin connection terminal with plug-in contact technology.
Lieske Part No.: 873176

Fixing material for e
52 ..ECG Version:
suspension hooks with screw M8, Stainless Steel Type: H8V / P Quantity:
ST.
Lieske Part No.: 780667

Tube(Eco)/Aneto 17° reflector
Lieske Part No.: 2022303

Tube Micro Black Ø39 Bezel Ring Aluminium
Lieske Part No.: 2023098

Tube Micro Gold Ø39 Bezel Ring Aluminium
Lieske Part No.: 2023099

Hovden Graphite Maxi Visor Aluminium
Lieske Part No.: 2022521

Highbay 11Cover,PC, UV-stabilized,Extension
Lieske Part No.: 1593618

Fire protection class: Not relevant
Burning droplets: Not relevant
Smoke development: Not relevant
Acid development: Not relevant
Description: Labeling strips 380x12 mm, self-adhesive, with plastic cover for front panel BASIS V / ECONOMY V / PROFI V / PROFI Plus / PROFI T / PROFI E
Sales unit: 10 pieces
Lieske Part No.: 832596

Telegärtner assembly tools were specifically developed for the assembly steps involved in installing our products. They significantly simplify cable preparation, connecting to a cable, and on-site installation. This enables the installer to achieve substantial time savings and work much more efficiently and reliably. In addition to the tool itself, replacement parts are also available.

Key Features:

Specifically developed for assembling Telegärtner products,
Simplifies and accelerates work steps,
Increases reliability during assembly

Notes: without crimping insert: to be ordered separately, in plastic case
Fire protection class: Not applicable
Burning drips: Not applicable
Smoke development: Not applicable
Acid development: Not applicable
Lieske Part No.: 912592

Quick-assembly swivel bracket (4 pieces), galvanized, for fastening recessed lights (Creavo M37/M39 or Opendo M36/M37/M38/M39) in ceilings with concealed support rails and sawn ceilings. Dimension between lower edge of ceiling panel and upper edge of support rail max. 56 mm, support rail height min. 18 mm.
Lieske Part No.: 248881

Through wiring for grid lights 35/49/80 W, LED 1500. Length 1750. Consists of 3 individual conductors 1.5mm2. Heat resistance up to 105 °C.
Lieske Part No.: 139790

Through-wiring version: for
/ 36...2/36 Type: 37 / 5LV/36 item:
ST.
Lieske Part No.: 891583

Feed-in accessories for mains feed-in for 05000 SN, 05000 SN/2m. Consists of strain reliefs, fastening screws and connection terminal 4 x 2.5 mm2. Accessories available for 10 years after the invoice date subject to reasonable changes in the interests of progress.
Lieske Part No.: 269543

Rope suspension with suspension clamp. For suspension lengths up to 1500 mm. Consists of 1 steel rope, galvanized, ø 1.5 mm and stainless steel suspension clamp. Rope length can be adjusted continuously without tools. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 993331

Replacement cover for wall and ceiling mounted lights 7402N / Mondia WD2. Outside diameter Ø 402 mm, height 96 mm.
Lieske Part No.: 482739

Replacement cover for wall and ceiling mounted lights 7403N / Mondia WD3. Outside diameter Ø 512 mm, height 132 mm.
Lieske Part No.: 396060

Angle support rail. 1 pair. 2-length version. Length: 3100 mm. Accessories available for 10 years after the invoice date, subject to reasonable changes in the interests of progress.
Lieske Part No.: 678418

Single installation frame for Fidesca-PM 296/1248 LED, FidescaPM D1. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138662

Single installation frame for Fidesca-PM 296/1548 LED, FidescaPM D2. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138652

Central mounting frame for Fidesca-PM 296/1548 LED, FidescaPM D2. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138653

Angle mounting frame left for Fidesca-PM296/1248 LED, FidescaPM D1. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138674

Right angle installation frame for Fidesca-PM 296/1248 LED, FidescaPM D1. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138798

Fitting for Fidesca-PM 296/1548 LED, FidescaPM D2. To be used in conjunction with angle mounting frame. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 138807

Single installation frame for Fidesca-PM 412/1248 LED, FidescaPM D3. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137382

Initial installation frame for Fidesca-PM 412/1548 LED, FidescaPM D3. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137383

End mounting frame for Fidesca-PM 412/1248 LED, FidescaPM D3. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137388

Central mounting frame for Fidesca-PM 412/1248 LED, FidescaPM D3. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137391

Central mounting frame for Fidesca-PM 412/1548 LED, FidescaPM D4. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137378

Angle mounting frame left for Fidesca-PM 412/1248 LED, 412/1548 LED, FidescaPM D3, FidescaPM D4. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137398

Right angle installation frame for Fidesca-PM 412/1248 LED, 412/1548 LED, FidescaPM D3, FidescaPM D4. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137410

Fitting for Fidesca-PM 412/1548 LED, FidescaPM D4. To be used in conjunction with angle mounting frame. Frame made of extruded aluminum profile, white, powder-coated. Stop angle for ceiling material 25 mm high. Accessories available for 10 years after the invoice date subject to reasonable changes in the interest of progress.
Lieske Part No.: 137414