Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable

Your rating:
Average rating
product review for Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable
( 4 / 5 ) 6 ratings
Lapp 221807/76
This image may differ from the desired article.
Lapp 221807/76Lapp 221807/76
573,46 EUR
incl. 58,72 EUR copper surcharge
( 682,42 EUR incl. VAT )
≈ £479.41  |  ≈ $633.67
plus delivery charges: 148,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
Sales unit: 76 meters
1x Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable
Lieske Part No.:205749
Mfg Part No: 221807/76
UPC/EAN: 4044774573526
Weight:11.324 kg
Type:ÖLFLEX TRAY II 7G1,0 18AWG

Product information for Lapp 221807/76:

The control cable ÖLFLEX® TRAY II 7G1, type 18/7C, manufacturer's number 221807/76, is produced by Lapp and designed for use in industrial plants and machines. It is suitable for wiring internal machine and cross-plant control circuits and is intended for fixed installation as well as occasional movement. The cable is specifically developed for use in the USA, features UL certification, and thus enables use in the North American market. At the same time, it is universally applicable in Europe, supported by multi-certification, which reduces part variety. The flexible construction allows for easy and cost-saving installation, as additional cable protection systems can be omitted.

Applications
This control cable is suitable for moderate mechanical stress and can be used in dry, damp, and oily environments. It is suitable for outdoor use in both the USA and Europe, provided the temperature range is observed. In the USA, it is also approved for direct burial. A special application field is its use in torsion applications in wind turbines, where the cable meets specific requirements for flexibility and load capacity. Installation is done openly on cable trays without protective conduit, simplifying the process.

Functions and Equipment in Detail
The cable features conductor identification by numbers, which facilitates assignment and wiring during operation. The construction is oil-resistant and flame-retardant, enhancing safety in industrial environments. The flexible structure allows movement under occasional mechanical loads without impairing electrical conductivity. Use in oily environments is possible due to special materials that offer high resistance to mineral oils and other lubricants.

Technology Explained Simply
The ÖLFLEX® TRAY II 7G1 control cable is a flexible control cable with 7 conductors, each 1.0 mm² cross-section (equivalent to 18 AWG). UL certification ensures compliance with North American safety standards, particularly for use in industrial and machine tools. The flame-retardant property reduces fire risk in case of short circuits or overloads. The oil-resistant insulation protects the conductors from chemical degradation caused by lubricants and coolants. The flexible structure allows movement under occasional mechanical loads without impairing electrical conductivity.

Compatibility and Accessories
The cable is suitable for use in various industrial plants, particularly in machine building, machine tools, and wind energy installations. Multi-certification enables universal use in Europe and the USA, simplifying logistics and ordering processes. Installation is done openly on cable trays, eliminating the need for additional protection systems. The cable is suitable for torsion applications in wind turbines, expanding its application range in renewable energy technology.

Installation and Mounting
Installation is performed by open routing on cable trays, with no protective conduit required. The flexible structure facilitates bending and routing, especially in confined spaces or complex routing paths. Conductor identification by numbers supports correct assignment during wiring. The cable can be installed in dry, damp, and oily environments, provided temperature limits are observed. Direct burial is permitted in the USA, subject to local regulations.

Operational Advantages
The control cable offers high reliability in industrial applications due to its oil-resistant and flame-retardant construction. Multi-certification enables universal use, reducing part variety and lowering logistics costs. The flexible structure and open installation on cable trays without protective conduit result in simple and cost-effective installation. Suitability for torsion applications in wind turbines expands application possibilities in renewable energy technology. The cable is suitable for outdoor use, provided temperature limits are observed, and can be used in oily environments without impairing electrical properties.

The item price shown refers to 76 meters Lapp 221807/76
General
Number of conductors7 piece
Wire identificationnumbers
Degree of protectionFlexible
ApprovalUL listed
Applicationcontrol cable
Temperature range-25 °C °C
Application rangeInterior and exterior area
Direct burialin the USA
Torsion applicationwind turbines
Installationopen on cable trays
Certificationmulti-certification
Oil resistanceYes
Flame retardancyYes


Please note...
This article contains a copper surcharge of 58,72 EUR. This depends on daily copper prices and weight of included copper. You can inquire the copper price via phone under +49 7666 884990

Questions & answers

What is the delivery time of Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable ?

The article Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Lapp 221807/76 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable always at the best possible price. We can give you a discount of 2% on Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

How many units does the article contain?

Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable is offered by us in a sales unit of 76 meters If you need a larger quantity, you can contact us at any time. We will make a special offer for you

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Lapp 221807/76 ÖLFLEX TRAY II 7G1,0 18AWG control cable
Lapp 221807/76 ÖLFLEX TRAY II 7G1.0 18AWG control cable
573,46 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Lapp 221807/76 ÖLFLEX TRAY II 7G1,0 18AWG control cable
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
6 + 4 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.