Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm

Your rating:
Average rating
product review for Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm
( 4 / 5 ) 2 ratings
Lapp 2173002
This image may differ from the desired article.
10,72 EUR
incl. 0,43 EUR copper surcharge
( 12,76 EUR incl. VAT )
≈ £8.97  |  ≈ $11.78
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm
Lieske Part No.:695964
Mfg Part No: 2173002
UPC/EAN: 4044777483013
Weight:0.09 kg
Type:UNITRONIC TRAIN MVB 2x2x0,5
Graduated prices net
From piecesPrice per meters
1510,18 EUR
309,64 EUR
709,10 EUR
1008,56 EUR

Product information for Lapp 2173002:

The UNITRONIC® TRAIN MVB 2x2x0.5 cable from Lapp is a data cable specifically developed for use in rail vehicles and buses. It is designed for communication in the Train Communication Network (TCN) according to the IEC 61375 standard, supporting the Multifunction Vehicle Bus (MVB) interface as defined in IEC 61375-3-1. The cable is intended for fixed installation and can also be used in applications involving limited movement. It is suitable for operation in oily environments and areas with elevated ambient temperatures.

Applications
This cable is primarily designed for use in rail vehicles and buses, where reliable and robust data transmission under harsh operating conditions is required. It is used in the TCN system, which consists of the communication systems WTB (Wire Train Bus) and MVB (Multifunction Vehicle Bus). These systems enable the networking of various vehicle components, such as controls, brakes, lighting, and air conditioning, over a unified network.

Functions and Features in Detail
The UNITRONIC® TRAIN MVB 2x2x0.5 features a nominal characteristic impedance of 120 Ohms, which is necessary for optimal signal transmission in CAN-bus systems. The cable’s construction ensures high mechanical robustness and resistance to mechanical influences, making it suitable for use in vehicles subjected to high vibration and shock loads. Additionally, the cable is optimized for electromagnetic compatibility (EMC) to minimize interference from electromagnetic fields and ensure stable data transmission.

Technology Explained Simply
The designation 2x2x0.5 describes the cable’s construction: it consists of two pairs of conductors, each with a cross-section of 0.5 mm². This design is typical for bus cables used for both data transmission and power supply to control units. The cable is designed for use in environments with elevated temperatures, making it suitable for areas within the vehicle where high thermal loads occur. Its chemical resistance protects the cable from exposure to oil and other chemicals commonly found in vehicle environments.

Compatibility and Accessories
The cable is compatible with the IEC 61375-3-1 standard for MVB and IEC 61375-2-1 for WTB, which are part of the TCN system. These standards define the physical and electrical properties of bus cables to enable uniform communication within the vehicle. The cable can be connected to other TCN system components, such as control units, sensors, and actuators, which are also connected to the TCN.

Installation and Mounting
The cable is designed for fixed installation, meaning it is not intended for frequent movement or bending. Installation typically occurs during vehicle assembly, with the cable routed along predefined paths. Connections to devices are made using appropriate connectors designed for use in the TCN system.

Operational Advantages
The cable offers an extended temperature range, enabling use in various environments. Its reduced flame spread helps protect people and property in the event of a fire. High mechanical robustness and EMC optimization ensure reliable and stable data transmission, even under harsh operating conditions. Good chemical resistance increases the cable’s service life in oily environments.

General
Rated shaft resistance120 Ohm
Cable typeBus wiring
Applicationrail vehicles, buses
Installation methodFixed installation
CompatibilityTCN according to IEC 61375
MVB standardIEC 61375-3-1
WTB standardIEC 61375-2-1
Construction2x2x0,5
Core cross section0,5 mm²
Temperature resistanceelevated ambient temperature
Chemical resistanceoily environment
Fire spreadreduced
Diameter8,3 mm
EMC optimisationYes


Please note...
For this article, we charge 14,85 EUR for measuring, cutting and re-furling the cable. If you take a whole 100m or 500m cable reel, the charge will of course be dropped.

The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.

Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
This article contains a copper surcharge of 0,43 EUR. This depends on daily copper prices and weight of included copper. You can inquire the copper price via phone under +49 7666 884990

Questions & answers

What is the delivery time of Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm ?

The article Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Lapp 2173002 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm always at the best possible price. We can give you a discount of 2% on Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 15 meters of Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm we can offer you a price of 10,18 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0,5 bus cable
Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0.5 bus cable CAN 8.3 mm
10,72 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Lapp 2173002 UNITRONIC TRAIN MVB 2x2x0,5 bus cable
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 1 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.