Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible
|
15,68 EUR |
|||||||||||
|
incl. 6,22 EUR copper surcharge ( 18,66 EUR incl. VAT ) ≈ £13.11 | ≈ $17.33 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 211603 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 1136614 | ||||||||||
| UPC/EAN: | 4044773091625 | ||||||||||
| Weight: | 0.637 kg | ||||||||||
| Type: | ÖLFLEX/CLASSIC/115/CY/4G10,0 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Lapp 1136614:
Applications
This control cable is designed for industrial applications where reliable signal transmission under moderate mechanical stress is required. It is commonly used in machine building, plant engineering, and automation technology. Its use in dry and damp rooms makes it flexible for deployment, even in environments with increased humidity. The verified resistance to ECOLAB® disinfectants and cleaning agents extends its application range to areas with hygiene requirements.
Functions and Features in Detail
The cable features a copper braided shield with high coverage, providing effective protection against electromagnetic interference. Conductor identification is done by numbers, enabling simple and secure wiring. The construction without an inner sheath results in lower weight and a smaller outer diameter, saving space. Reduced wall thicknesses also contribute to the compact design.
Technology Explained Simply
The control cable is rated for an operating voltage of U0/U: 300/500 V, making it suitable for typical control and signal applications in industry. The copper braided shield protects the conductors against electromagnetic interference, enhancing signal quality. The PVC insulation and outer sheath provide chemical resistance, particularly against acids, alkalis, and conditionally against oil. The cable is flexible, but not designed for frequent or dynamic movements; it is intended for fixed installation with occasional movements without tensile stress.
Compatibility and Accessories
The control cable is universally applicable in control and signal systems. It can be connected using standard connectors and cable glands suitable for PVC insulation. Use in wind turbines requires specific mounting and installation guidelines, which must be considered in the respective project plan.
Installation and Mounting
The cable is intended for fixed installation and can be laid in cable ducts, shafts, or on trays. For occasional movements, it must be ensured that no tensile stress occurs. Installation must comply with applicable regulations for electrical installations. Conductors are connected using suitable connectors or terminals, with numbering aiding identification.
Operational Advantages
The combination of low weight, small outer diameter, and high protection against electromagnetic interference makes the cable particularly economical and reliable. Resistance to chemical influences and verified compatibility with disinfectants increase service life and operational safety. The classification of fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) allows use in buildings subject to this regulation.
| General | |
| Cable type | control cable |
| Product line | ÖLFLEX® CLASSIC 115 CY |
| Number of cores | 4 |
| Core cross section | 10 mm² |
| Operating voltage | 300/500 V |
| Insulating material | PVC |
| Wire identification | numbers |
| Shielding | Copper shield braid |
| Degree of protection | shielded |
| Operating conditions | Fixed installation, occasional movement without tensile stress |
| Application environment | dry and damp rooms |
| Chemical resistance | resistant to acids, alkalis, conditionally oil-resistant |
| Resistance to disinfectants | tested against ECOLAB® agents |
| Flame retardancy | Classified according to EU Directive 305/2011 (BauPVO/CPR) |
| Construction | without inner sheath, reduced wall thickness |
The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.
Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
Questions & answers
What is the delivery time of Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible ?
The article Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Lapp 1136614 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible always at the best possible price. We can give you a discount of 2% on Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 25 meters of Lapp 1136614 ÖLFLEX CLASSIC 115CY 4G10 300/500 V PVC shielded flexible we can offer you a price of 15,18 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



