| General |
| Cable type | control cable |
| Product line | ÖLFLEX® CLASSIC 115 CY |
| Number of cores | 4 |
| Core cross section | 10 mm² |
| Operating voltage | 300/500 V |
| Insulating material | PVC |
| Wire identification | numbers |
| Shielding | Copper shield braid |
| Degree of protection | shielded |
| Operating conditions | Fixed installation, occasional movement without tensile stress |
| Application environment | dry and damp rooms |
| Chemical resistance | resistant to acids, alkalis, conditionally oil-resistant |
| Resistance to disinfectants | tested against ECOLAB® agents |
| Flame retardancy | Classified according to EU Directive 305/2011 (BauPVO/CPR) |
| Construction | without inner sheath, reduced wall thickness |
The control cable ÖLFLEX® CLASSIC 115 CY 4G10 from Lapp is a flexible, shielded cable designed for industrial applications. It is intended for moderate mechanical stress and suitable for fixed installation as well as occasional movement without tensile load. The cable is used in dry and damp rooms and is universally suitable for wiring internal machine and plant-wide control circuits. The PVC outer sheath offers resistance to acids, alkalis, and is conditionally oil-resistant. The cable construction is also suitable for torsional applications in wind turbines.
Applications
This control cable is designed for industrial applications where reliable signal transmission under moderate mechanical stress is required. It is commonly used in machine building, plant engineering, and automation technology. Its use in dry and damp rooms makes it flexible for deployment, even in environments with increased humidity. The verified resistance to ECOLAB® disinfectants and cleaning agents extends its application range to areas with hygiene requirements.
Functions and Features in Detail
The cable features a copper braided shield with high coverage, providing effective protection against electromagnetic interference. Conductor identification is done by numbers, enabling simple and secure wiring. The construction without an inner sheath results in lower weight and a smaller outer diameter, saving space. Reduced wall thicknesses also contribute to the compact design.
Technology Explained Simply
The control cable is rated for an operating voltage of U0/U: 300/500 V, making it suitable for typical control and signal applications in industry. The copper braided shield protects the conductors against electromagnetic interference, enhancing signal quality. The PVC insulation and outer sheath provide chemical resistance, particularly against acids, alkalis, and conditionally against oil. The cable is flexible, but not designed for frequent or dynamic movements; it is intended for fixed installation with occasional movements without tensile stress.
Compatibility and Accessories
The control cable is universally applicable in control and signal systems. It can be connected using standard connectors and cable glands suitable for PVC insulation. Use in wind turbines requires specific mounting and installation guidelines, which must be considered in the respective project plan.
Installation and Mounting
The cable is intended for fixed installation and can be laid in cable ducts, shafts, or on trays. For occasional movements, it must be ensured that no tensile stress occurs. Installation must comply with applicable regulations for electrical installations. Conductors are connected using suitable connectors or terminals, with numbering aiding identification.
Operational Advantages
The combination of low weight, small outer diameter, and high protection against electromagnetic interference makes the cable particularly economical and reliable. Resistance to chemical influences and verified compatibility with disinfectants increase service life and operational safety. The classification of fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) allows use in buildings subject to this regulation.