Installation Material

Fuse terminal with pivoting fuse holder for G-fuse insert 1/4' x 1' without defect indicator, center labelling grey
Sales unit: 50 pieces
Lieske Part No.: 151329

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1', with defect indication by glow lamp, 230 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962896

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1', with defect indication by glow lamp, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962897

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1', with defect indication via LED, 15 - 30 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 356854

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1', with defect indication via LED, 30 - 65 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962898

Fuse terminal with pivoting fuse holder for G-fuse insert 5 x 20 mm without defect indicator orange
Sales unit: 50 pieces
Lieske Part No.: 270849

Double-deck terminal, feed-through/through terminal, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 500429

Double-deck terminal through/through terminal with additional cross-bridging on the ground floor for mounting rail 35 x 15 and 35 x 7.5 4 mm² CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 460822

Fuse terminal with pivoting fuse holder for G-fuse insert 5 x 30 mm without defect indicator grey
Sales unit: 50 pieces
Lieske Part No.: 325625

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 30 mm, with defect indication by glow lamp, 230 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1231934

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 30 mm, with defect indication by glow lamp, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962899

Fuse terminal with pivoting fuse holder for G-fuse insert 5 x 30 mm 15 - 30 V with defect indication by LED grey
Sales unit: 50 pieces
Lieske Part No.: 795560

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert 5 x 30 mm, with defect indication via LED, 30 - 65 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962900

Fuse terminal with pivoting fuse holder for G-fuse insert 1/4' x 11/4' without defect indicator grey
Lieske Part No.: 878638

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1¼', with defect indication by glow lamp, 230 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962901

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1¼', with defect indication by glow lamp, 120 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1231933

Fuse terminal with swiveling fuse holder for G-fuse insert 1/4' x 11/4' 15 - 30 V with defect indication by LED grey
Sales unit: 50 pieces
Lieske Part No.: 589701

2-conductor fuse terminal, with pivoting fuse holder, for G-fuse insert ¼' x 1¼', with defect indication via LED, 30 - 65 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962902

2-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 716546

Double-deck terminal, feed-through/feed-through terminal, suitable for Ex i applications, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², 4.00 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1963998

Double-deck terminal, feed-through/feed-through terminal, with additional cross-bridging on the ground floor, suitable for Ex i applications, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², 4.00 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1963999

3-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², gray
Lieske Part No.: 825331

Component terminal, double-deck, with diode 1N4007, anode below, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962903

Component terminal, double-deck, with diode 1N4007, anode at the top, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962904

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962905

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962906

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962907

Component terminal, double-deck, with 2 diodes 1N4007, anodes at the top, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962908

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 688542

Component terminal, double-deck, with 2 diodes 1N4007, anode top, anode left, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 303376

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962909

Component terminal, double-deck, with 2 diodes 1N4007, anodes at the top, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962910

3-conductor protective conductor terminal, 4 mm², central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², green-yellow
Lieske Part No.: 551621

3-conductor protective conductor terminal, 4 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², green-yellow
Sales unit: 100 pieces
Lieske Part No.: 1964106

3-conductor feed-through terminal, 4 mm², suitable for Ex i applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², blue
Sales unit: 100 pieces
Lieske Part No.: 935120

4-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 653333

4-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 413965

4-wire feed-through terminal suitable for Ex i applications blue
Sales unit: 50 pieces
Lieske Part No.: 525451

4-conductor base terminal, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 591894

4-conductor protective conductor terminal, 4 mm², central labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 240444

4-conductor protective conductor terminal 4 mm² suitable for Ex e II applications central labeling for mounting rail 35 x 15 and 35 x 7.5 CAGE CLAMP® green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1964107

4-conductor shield terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², white
Sales unit: 50 pieces
Lieske Part No.: 1963934

4-conductor disconnect terminal for mounting rail 35 x 15 and 35 x 7.5 4 mm² CAGE CLAMP® grey
Sales unit: 50 pieces
Lieske Part No.: 295831

4-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1964066

4-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², red
Sales unit: 50 pieces
Lieske Part No.: 726075

4-conductor feed-through terminal, 4 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4.00 mm², black
Sales unit: 50 pieces
Lieske Part No.: 701383

4-wire diode terminal with diode 1N5408 with diode 1N5408 for TS 35 front wiring CAGE CLAMP® connection horizontal design grey
Sales unit: 50 pieces
Lieske Part No.: 377786

Component terminal, 4 conductors, with diode 1N5408, anode right, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 244183

Component terminal, 4 conductors, with diode 1N4007, anode left, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1581073

Component terminal, 4 conductors, with diode 1N4007, anode right, for mounting rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1581072