Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

KTI media converter RJ45 / ST MM 2km

Your rating:
Average rating
product review for KTI media converter RJ45 / ST MM 2km
( 0 / 5 ) 0 ratings
92,80 EUR
( 110,43 EUR incl. VAT )
≈ £77.30  |  ≈ $101.80
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x KTI media converter RJ45 / ST MM 2km
Lieske Part No.:2116775
Mfg Part No: KC-300DM-T
Weight:0.123 kg

Product information for KTI KC-300DM-T:

The KTI media converter KC-300DM-T is a Fast Ethernet device that enables the transition between a twisted-pair connection via RJ45 and a fiber optic connection via ST connector. The device is designed for use in networks where a connection between wired Ethernet systems and fiber optic infrastructures is required, for example in industrial or building communication systems. With an RJ45 port for 10/100 Mbps and a fiber optic port for multimode (MM) via ST connector with a range of up to 2 km, it provides a reliable bridge between different transmission media.

Media converter serves as an interface element between different network media, in this case enabling the connection from copper cables (RJ45) to fiber optic cables (ST MM). This conversion occurs without data loss and allows the use of existing copper infrastructure at one end and fiber optic lines at the other, which is particularly useful when expanding existing networks or bridging longer distances. The maximum range of 2 km with multimode fiber optic is sufficient for many applications in building and industrial communication.

Fast Ethernet refers to a network technology with a data transfer rate of 100 Mbps, offering higher bandwidth compared to 10 Mbps Ethernet. The converter supports both 10 Mbps and 100 Mbps in half- and full-duplex mode, making it flexible for various network operating modes. Support for full-duplex enables simultaneous sending and receiving, increasing network efficiency.

Fiber optic port with ST connector is a standard for connecting fiber optic cables. The ST connector is a cylindrical plug connector commonly used in industrial and building communication systems. The use of multimode fiber optic (MM) enables cost-effective and reliable data transmission over the specified range of 2 km. The fiber optic connection is immune to electromagnetic interference, making it particularly suitable for environments with high levels of electromagnetic noise.

Optimized latency performance means that the converter minimizes delay during data transmission. This is especially important in applications requiring real-time communication or time-critical data transfer, such as in industrial automation or monitoring systems. Low latency ensures that data is transmitted as quickly as possible and with minimal delay between the media.

Extended diagnostic functionality enables better network monitoring and fault diagnosis. These functions may include status indicators for the RJ45 and fiber optic connections, error detection in case of signal loss, or link status indicators. Such diagnostic features simplify network maintenance and troubleshooting, as technical issues can be identified and localized more quickly.

The converter is designed for use in networks requiring a combination of copper and fiber optic connections. It is particularly suitable for applications in building communication, industrial networks, or connecting network segments over longer distances. The combination of RJ45 and ST ports makes it flexible to use without requiring additional adapters or converters.

The use of Fast Ethernet and fiber optic technology ensures a stable and high-performance network connection. Support for 10/100 Mbps allows adaptation to existing network infrastructures, while the fiber optic connection provides high bandwidth and immunity to interference. The extended diagnostic functionality supports network administration in maintaining and optimizing connections.

Compatibility is provided for standard networks using RJ45 and multimode fiber optic connections. The use of ST connectors is common in many industrial and building communication systems, allowing the converter to be easily integrated into existing infrastructures. The maximum range of 2 km with multimode fiber optic is sufficient for many applications, especially when connecting between buildings or over longer distances within a building.

Installation is typically done in a standard 19-inch rack, with the device featuring mounting holes or fastening elements for installation in a network rack. Installation requires connecting the RJ45 port to an Ethernet end device or switch and connecting the ST port to a multimode fiber optic cable. The diagnostic functions support installation by displaying the status of the connections and enabling quick fault detection.

In operation, the converter provides reliable and stable data transmission with low latency. The combination of copper and fiber optic technology enables flexible network design, utilizing the advantages of both media. The extended diagnostic functionality reduces maintenance time and improves network security, as issues can be quickly identified and resolved.

Note: Batteries or other accessories not mentioned are not included in the delivery scope.

General
Number of RJ45 ports1
Number of fibre optic ports1
RJ45 port speed10/100 Mbps
Fibre optic connectorST
Fibre optic range2 km
Ethernet standardFast Ethernet
Latency behaviouroptimised
Diagnostic functionsextended


Questions & answers

What is the delivery time of KTI media converter RJ45 / ST MM 2km?

The article KTI media converter RJ45 / ST MM 2km is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of KTI KC-300DM-T to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you KTI media converter RJ45 / ST MM 2km always at the best possible price. We can give you a discount of 2% on KTI media converter RJ45 / ST MM 2km if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x KTI KC-300DM-T media converter RJ45 ST MM 2km
KTI media converter RJ45 / ST MM 2km
92,80 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: KTI KC-300DM-T media converter RJ45 ST MM 2km
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
9 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.