| General |
| Number of RJ45 ports | 1 |
| Number of fibre optic ports | 1 |
| RJ45 port speed | 10/100 Mbps |
| Fibre optic connector | ST |
| Fibre optic range | 2 km |
| Ethernet standard | Fast Ethernet |
| Latency behaviour | optimised |
| Diagnostic functions | extended |
The KTI media converter KC-300DM-T is a Fast Ethernet device that enables the transition between a twisted-pair connection via RJ45 and a fiber optic connection via ST connector. The device is designed for use in networks where a connection between wired Ethernet systems and fiber optic infrastructures is required, for example in industrial or building communication systems. With an RJ45 port for 10/100 Mbps and a fiber optic port for multimode (MM) via ST connector with a range of up to 2 km, it provides a reliable bridge between different transmission media.
Media converter serves as an interface element between different network media, in this case enabling the connection from copper cables (RJ45) to fiber optic cables (ST MM). This conversion occurs without data loss and allows the use of existing copper infrastructure at one end and fiber optic lines at the other, which is particularly useful when expanding existing networks or bridging longer distances. The maximum range of 2 km with multimode fiber optic is sufficient for many applications in building and industrial communication.
Fast Ethernet refers to a network technology with a data transfer rate of 100 Mbps, offering higher bandwidth compared to 10 Mbps Ethernet. The converter supports both 10 Mbps and 100 Mbps in half- and full-duplex mode, making it flexible for various network operating modes. Support for full-duplex enables simultaneous sending and receiving, increasing network efficiency.
Fiber optic port with ST connector is a standard for connecting fiber optic cables. The ST connector is a cylindrical plug connector commonly used in industrial and building communication systems. The use of multimode fiber optic (MM) enables cost-effective and reliable data transmission over the specified range of 2 km. The fiber optic connection is immune to electromagnetic interference, making it particularly suitable for environments with high levels of electromagnetic noise.
Optimized latency performance means that the converter minimizes delay during data transmission. This is especially important in applications requiring real-time communication or time-critical data transfer, such as in industrial automation or monitoring systems. Low latency ensures that data is transmitted as quickly as possible and with minimal delay between the media.
Extended diagnostic functionality enables better network monitoring and fault diagnosis. These functions may include status indicators for the RJ45 and fiber optic connections, error detection in case of signal loss, or link status indicators. Such diagnostic features simplify network maintenance and troubleshooting, as technical issues can be identified and localized more quickly.
The converter is designed for use in networks requiring a combination of copper and fiber optic connections. It is particularly suitable for applications in building communication, industrial networks, or connecting network segments over longer distances. The combination of RJ45 and ST ports makes it flexible to use without requiring additional adapters or converters.
The use of
Fast Ethernet and
fiber optic technology ensures a stable and high-performance network connection. Support for 10/100 Mbps allows adaptation to existing network infrastructures, while the fiber optic connection provides high bandwidth and immunity to interference. The
extended diagnostic functionality supports network administration in maintaining and optimizing connections.
Compatibility is provided for standard networks using RJ45 and multimode fiber optic connections. The use of ST connectors is common in many industrial and building communication systems, allowing the converter to be easily integrated into existing infrastructures. The maximum range of 2 km with multimode fiber optic is sufficient for many applications, especially when connecting between buildings or over longer distances within a building.
Installation is typically done in a standard 19-inch rack, with the device featuring mounting holes or fastening elements for installation in a network rack. Installation requires connecting the RJ45 port to an Ethernet end device or switch and connecting the ST port to a multimode fiber optic cable. The diagnostic functions support installation by displaying the status of the connections and enabling quick fault detection.
In operation, the converter provides reliable and stable data transmission with low latency. The combination of copper and fiber optic technology enables flexible network design, utilizing the advantages of both media. The
extended diagnostic functionality reduces maintenance time and improves network security, as issues can be quickly identified and resolved.
Note: Batteries or other accessories not mentioned are not included in the delivery scope.