INTELLINET 561785
Outdoor Gigabit PoE++ injector with vandal protection One 60 watt port, IEEE 802.3bt compliant (4PPoE), IP67 waterproof, IK10 vandal resistant, metal housing

Outdoor Gigabit PoE++ Injector - 60 W with IEEE 802.3bt
The Gigabit PoE++ injector with vandalism protection for outdoor use from Intellinet Network Solutions connects IEEE 802.3bt/af/at-compliant access points , IP telephones or network cameras with switches that are not equipped with Power over Ethernet. This ensures power and data connection in one cable up to 100 m. The 4PPoE injector offers output power of up to 60 watts, which even supplies power-hungry PoE++ devices, e.g. E.g. motorized PTZ cameras, thin clients, POS systems, lighting control and digital signage applications.
Robust design for outdoor use and industrial areas
This PoE++ injector is particularly suitable for many environmental areas. Its weatherproof housing with IP67 protection is dust and waterproof. It also allows operation in extreme ambient temperatures from -40 to 75°C and with a shock resistance rating of IK10, it protects against vandalism. The additional levels of shock resistance (IEC 60068-2-27), free fall (IEC 60068-2-32) and vibration (IEC 60068-2-6) round off the robustness.
Less cabling costs< >
As mentioned at the beginning: You don't need separate power lines to supply your PD equipment (powered devices). Once you have connected the injector to a LAN switch and to your power network via the two-pin DC terminal block, you can achieve output power of up to 60 W and speeds in 10/100/1000 via Cat5/6/6a cable Mbit/s transmit up to 100 m.
Secure protection for your expensive network equipment
The autosensing technology of this Ultra PoE injector offers reliable protection against short circuits, ü ;overcharging and overvoltage. There is also port surge protection up to 6 kV as well as ESD protection up to 8 kV (air) and 6 kV (contact).
Optional wall mounting
For hearing For maximum flexibility when installing indoors and outdoors, the injector can be attached to a wall using the four mounting holes on the back. The required mounting material is included in the scope of delivery.
- Power over Ethernet with output power of up to 60 watts

• Protection class IP67, waterproof and dust-proof
• Shock resistance level IK10,Vandal-proof
• Suitable for operating in extreme ambient temperatures of -40 to 75ºC
• Compatible with IEEE 802.3bt/at/af compliant Powered Devices (PD) such as network cameras, WiFi access points, VoIP phones and more
• Supports 10/100 data transfer rates /1000 Mbps
• Supported range: up to 100 m
• Automatic PoE detection only transmits power to IEEE 802.3bt/at/af devices, non-PoE-capable devices only receive data
• Protection against short circuit, overcharging and overvoltage
• Ground point for protection against external electrical Voltage surges
• Port surge protection up to 6 kV
• ESD protection up to 8 kV (air) and 6 kV (contact)
• Tested for shock resistance (IEC 60068-2-27), free fall (IEC 60068-2-32) and Vibration (IEC 60068-2-6)
• Wall mounting via the two rear mounting holes
• Grounding kit included
• Saves time and installation costs by transmitting data and power via the existing network cables
• Plug < Play installation; No setup required
• Fully NDAA compliant
• 3 year warranty Standards
• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3at (High-Power PoE+ Power over Ethernet)
• IEEE 802.3bt (Ultra PoE++/4PPoE Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3ab (1000BASE-T Gigabit Ethernet)
General

• Supported media:
• 10Base-T Cat5e/6/6a UTP/STP RJ45
• 100Base- TX Cat5e/6/6a UTP/STP RJ45
• 1000Base-T Cat5e/6/6a UTP/STP RJ45
• Ports:
• 1 x RJ45 Gigabit data input port
• 1 x 2-pin. Terminal block, power input
• 1 x RJ45 output for PoE power + Gigabit data
• Certificates: FCC Class A, CE, RoHS
Electrical details

• DC input: 24.0 - 56.0 V DC, 3.05 A max. ; 2 Pol. Terminal Block
• DC Output: 60.0W, 55.0V DC, 1.2A; RJ45 PoE port
• Power consumption: 72.0W (max.)
PoE pinout

• Pin 1: DC (-)
• Pin 2: DC (-)
• Pin 3: DC (+)
• Pin 6: DC (+ )
• Pin 7: DC (-)
• Pin 8: DC (-)
LEDs

• Power (PWR, green) and PoE (green)
Physical details

• Dimensions (L x W x H): 150 x 73 x 44 mm
• Weight : 475g
• Enclosure Rating: IP67 (Weather), IK10 (Vandalism), IEC 60068-2-27 (Shock), IEC 60068-2-32 (Free Fall), IEC 60068-2-6 (Vibration)
Physical Details

• Ambient temperature During operation: -40 - 75°C
• Ambient temperature during storage: -40 - 80°C
• Humidity during operation: 10 - 90% RH, non-condensing
• Storage humidity: 5 - 90% RH, non-condensing
Scope of delivery

• Outdoor Gigabit PoE++ injector with vandalism protection
• Grounding kit
• Three cable glands with protection class IP67
• Wall mounting kit
• Instructions Color: Silver Product dimensions: 150 (L) x 73 (W) x 44 (H) [mm]