INTELLINET 561778
Outdoor Gigabit high-power PoE+ injector with vandalism protection One 30 watt port, IEEE 802.3at/af compliant, IP67 waterproof, IK10 vandalism-proof, metal housing

Outdoor Gigabit PoE+ injector - 30 W with IEEE 802.3at
The outdoor Gigabit high-power PoE+ injector with vandalism protection from Intellinet Network Solutions connects IEEE 802.3af/at-compliant access points, IP telephones or Network cameras with switches that are not equipped with Power over Ethernet. This ensures power and data connection in one cable up to 100 m. The PoE+ injector offers output current of up to 30 watts for many power-hungry PoE+ devices.
Robust design for outdoor use ;enuse and industrial areas
This PoE+ injector is suitable for a particularly wide range of environmental areas. Its weatherproof housing with IP67 protection is dust and waterproof. It also allows operation in extreme ambient temperatures from -40 to 75°C and with a shock resistance rating of IK10, it protects against vandalism. The additional levels of shock resistance (IEC 60068-2-27), free fall (IEC 60068-2-32) and vibration (IEC 60068-2-6) round off the robustness.
Less cabling costs< >
As mentioned at the beginning: You don't need separate power lines to supply your PD equipment (powered devices). Once you have connected the injector to a LAN switch and to your power network via the two-pin DC terminal block, you can achieve output power of up to 30 W and speeds in 10/100/1000 via Cat5/6/6a cable Mbit/s transmit up to 100 m.
Secure protection for your expensive network equipment
The autosensing technology of this PoE injector offers reliable protection against short circuits, ü Overcharging and overvoltage. There is also port surge protection up to 6 kV as well as ESD protection up to 8 kV (air) and 6 kV (contact).
Optional wall mounting
For hearing For maximum flexibility when installing indoors and outdoors, the injector can be attached to a wall using the four mounting holes on the back. The required mounting material is included in the scope of delivery.
- Power over Ethernet with output current of up to 30 watts

• Protection class IP67, waterproof and dust-proof
• Shock resistance level IK10, vandal-proof
• Suitable for extreme ambient temperatures from -40 to 75ºC during operation
• Compatible with IEEE 802.3at/af-compliant Powered Devices (PD) such as network cameras, WLAN access points,VoIP phones and more
• Supports data transfer rates of 10/100/1000 Mbps
• Supported range: up to 100 m
• Automatic PoE detection transmits power only to IEEE 802.3af/at compliant devices, non-PoE capable devices only receive data
• Short circuit, overcharge and over voltage protection
• Ground point to protect against external electrical voltage spikes
• Port surge protection up to 6 kV
• ESD protection up to 8 kV (air) and 6 kV (contact)
• Tested for shock resistance (IEC 60068-2-27), free fall (IEC 60068-2-32) and vibration (IEC 60068-2-6 )
• Wall mounting via the two rear mounting holes
• Grounding kit included
• Saves time and installation costs by transmitting data and power via the existing network cables
• Plug < Play installation; No setup required
• Fully NDAA compliant
• 3 year warranty Standards
• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3at (High-Power PoE+ Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base -TX Fast Ethernet)
• IEEE 802.3ab (1000BASE-T Gigabit Ethernet)
General

• Supported media:
• 10Base-T Cat5e/6/6a UTP/STP RJ45
• 100Base-TX Cat5e/6/6a UTP/STP RJ45
• 1000Base- T Cat5e/6/6a UTP/STP RJ45
• Ports:
• 1 x RJ45 Gigabit data input port
• 1 x 2-pin. Terminal block, power input
• 1 x RJ45 output for PoE power + Gigabit data
• Certificates: FCC Class A, CE, RoHS
Electrical details

• DC input: 24.0 - 56.0 V DC, 1.5 A max. ; 2 Pol. Terminal Block
• DC Output: 30.0W, 55.0V DC, 0.6A; RJ45 PoE port
• Power consumption: 36.0W (max.)
PoE pins

• Pin 1: DC (+)
• Pin 2: DC (+)
• Pin 3: DC (-)
• Pin 6: DC (- )
LEDs

• Power (PWR, green) and PoE (green)
Physical details

• Dimensions (L x W x H): 150 x 73 x 44 mm
• Weight: 386 g
• Housing classification: IP67 (weather), IK10 (vandalism), IEC 60068-2-27 (Shock), IEC 60068-2-32 (Free Fall), IEC 60068-2-6 (Vibration)
Physical details

• Operating ambient temperature: -40 - 75°C
• Storage temperature: -40 - 80 °C (-40 - 176°F)
• Operating humidity: 10 - 90% RH, non-condensing
• Storage humidity: 5 - 90% RH, non-condensing
Scope of delivery

• Outdoor Gigabit high-power PoE+ injector with vandalism protection
• Grounding kit
• Three cable glands with protection class IP67
• Wall mounting kit
• Instructions Color: Silver Product dimensions: 150 (L) x 73 (W) x 44 (H) [mm]