INTELLINET 561600
2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing
|
79,47 EUR |
|
|
( 94,57 EUR incl. VAT ) plus delivery charges |
|
| Delivery time from supplier's stock (ca.) 17 workdaysinfo_outline | |
| Lieske Part No.: | 1610479 |
|---|---|
| Mfg Part No: | 561600 |
| UPC/EAN: | 766623561600 |
| Weight: | 0.33 kg |
Product information for INTELLINET 561600:
The 2-Port Gigabit Ultra PoE Extender from Intellinet Network Solutions increases the range between the PoE source and two end devices by 100 m It does not require a separate, external power supply, but is powered directly by an injector or PoE switch. Since the standard range of PoE is already 100 m, the possible total distance increases to a huge 200 m.
Cost savings through less cabling
This repeater reduces your installation effort Significant: For devices such as WLAN access points, network cameras or VoIP phones, you no longer have to install sockets and run separate power cables, even if they are far away from the PoE source. Use the usual advantages of Power over Ethernet and supply the end devices with both data and power with a single Cat5e/Cat6 network cable.
802.3bt compliant
This gigabit extender supports the new IEEE 802.3bt protocol over all four pairs of wires (4PPoE), which allows a power budget of a whopping 60 W and simultaneously up to 30 W on both ports on IEEE 802.3at or IEEE 802.3 af-compliant devices. The cable length can be up to 100 m in front of and behind the extender, for a total range of 200 m.
Easy installation
This extender was designed to be particularly simple Facility valued– Simply connect your injector or switch to the PoE In" port and the PoE end device such as VoIP phone or camera to the "PoE Out port. That's all. No further configuration is necessary.
- Doubles the maximum connection range between PoE source and device from 100 m to 200 m
- Power supply and network connection for two PoE devices such as network cameras, access points or VoIP phones through PoE injector or PoE switch
- Delivers up to 60W to two connected PoE devices with up to 30W per port
- Supports data transfer rates of 10/100/1000 Mbps
- PoE power budget 60 watts
- Saves time and installation costs by transmitting data and power over existing network cables
- power is only transmitted to IEEE 802.3af/at compliant devices,Non-PoE-capable devices only receive data
- Protection against overvoltage, overcharging and voltage spikes
- Ground point for protection against external electrical voltage spikes
- Does not require additional power supply; draws power directly via the PoE input
- Compatible with IEEE 802.3bt/at/af-compliant PoE injectors and switches (PSE)
- Compatible with all IEEE 802.3at/af-compliant Powered Devices (PD)
- Can be used as a 3-port Gigabit switch with PoE power supply and PoE passthrough
- 6 Gbit/s switch fabric
- Supports jumbo frames up to 9 kByte
- Supports 2048 MAC address entries
- LEDs for PoE and data connection
- Fan-free design for quiet operation
- Compact metal housing
- Rubber feet for non-slip use in desktop applications
- Fully NDAA compliant
- 3 year warranty Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3at (High-Power PoE+ Power over Ethernet)
- IEEE 802.3bt (Ultra PoE++/4PPoE Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Gigabit Ethernet)
- IEEE 802.3x (Full duplex and flow control)
- IEEE 802.3u (100Base-TX Fast Ethernet) General
- Supported media:
- 10Base-T Cat5e UTP/ STP RJ45, 8-pin
- 100Base-TX Cat5e UTP/STP RJ45, 8-pin.
- 1000Base-T Cat5e UTP/STP RJ45, 8-pin.
- Ports:
- 1 x RJ45 10/100/1000 Mbit/s input
- 2 x RJ45 10/100/1000 Mbit/s PoE output port
- MAC address table: 2048 entries
- Cache: 256 kB
- Backplane speed: 6 Gbit/s
- Store-and-Forward Architecture
- Certificates: FCC Class A, CE, RoHS LEDs
- PoE
- Link/Activity PoE Pins
- Pin 1: DC (+)
- Pin 2: DC (+)
- Pin 3 : DC (-)
- Pin 6: DC (-) power supply
- Max. PD output current: 30 W per port, 44 - 57 V
- Input current: IEEE 802.3bt/at/af compliant PSE, 60 W max., 50 – 57 VDC Ambient conditions
- Metal housing
- Dimensions: 130 x 86 x 29 mm
- Weight: 331 g
- Operating temperature: 0 - 40°C
- Storage temperature: -10 - 70°C
- Humidity: 20% - 85% RH, non-condensing Included in delivery
- 2-Port Gigabit Ultra PoE++ Extender
- Four rubber feet
- Quick start guide Color: Black Product dimensions: 130 (L) x 86 (W) x 29 (H) [mm]
Questions & answers
What is the delivery time of INTELLINET 561600 2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing?
The article INTELLINET 561600 2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing is currently in stock
According to our experience the article is ready for dispatch within 17 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of INTELLINET 561600 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you INTELLINET 561600 2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing always at the best possible price. We can give you a discount of 2% on INTELLINET 561600 2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing if you choose payment in advance on ordering.
You can also send us a price proposal for your desired quantity of INTELLINET 561600 2-Port Gigabit Ultra PoE Extender Extends PoE range by 100 m, PoE power budget 60 W, two PSE ports with 30 W output power each, IEEE 802.3bt compliant (PoE++ / 4PPoE), metal housing via the form price proposal. Enter your name, contact details, price and quantity you need. Our sales team will then send you a good quotation immediately.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.