Ifm Electronic LR8010 level sensor PNP rod L=100...1600 mm 4 bar G 3/4 external
|
600,99 EUR |
|
|
( 715,18 EUR incl. VAT ) ≈ £502.43 | ≈ $664.09 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 8 workdaysinfo_outline | |
| Datasheet: | file_download Download |
|---|---|
| Lieske Part No.: | 554541 |
| Mfg Part No: | LR8010 |
| UPC/EAN: | 4021179276825 |
| Weight: | 0.402 kg |
| Type: | LR8010 |
Further Built-Command and signaling devices from Ifm ElectronicFurther products in category Built-Command and signaling devices
All products of Ifm Electronic
Product information for Ifm Electronic LR8010:
Electronic level sensor, DC PNP, Guided wave radar, Freely rotatable housing 360°, General building authority approval: Z-65.16-529, Overflow protection, Only use with a rod + a coaxial pipe, Connector, 4-digit alphanumeric display, 4 switching outputs (one of them for overflow protection according to the German Federal Water Act (WHG)), 4-digit alphanumeric display
Application: Hydrous coolants, oils, oil-based media, water, media similar to water
Operating voltage: 18...30 V DC
Electrical design: DC PNP
Output function: 3 x NO / NC programmable;, 1 x NC (WHG - German Federal Water Act)
Current rating: 200 mA
Probe length L: 100...1600 mm
Active range A: L-40 (L-60) mm
Connection: M12 connector (according to EN 61076-2-101)
Housing materials: stainless steel 316L / 1.4404; stainless steel (304S15); FKM; PBT-GF 20; PC; PEI; TPV
Materials (wetted parts): stainless steel (303S22); probe connection: stainless steel 316L / 1.4435; PTFE; FKM; sealing: NBR-PPTA 20
Medium temperature: 0...80 °C
Ambient temperature: 0...60 °C
Protection: IP 67
Display: Display unit: 3 x LED green ; Switching status: 4 x LED yellow ; Level: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories
Type: LR8010
Application: Hydrous coolants, oils, oil-based media, water, media similar to water
Operating voltage: 18...30 V DC
Electrical design: DC PNP
Output function: 3 x NO / NC programmable;, 1 x NC (WHG - German Federal Water Act)
Current rating: 200 mA
Probe length L: 100...1600 mm
Active range A: L-40 (L-60) mm
Connection: M12 connector (according to EN 61076-2-101)
Housing materials: stainless steel 316L / 1.4404; stainless steel (304S15); FKM; PBT-GF 20; PC; PEI; TPV
Materials (wetted parts): stainless steel (303S22); probe connection: stainless steel 316L / 1.4435; PTFE; FKM; sealing: NBR-PPTA 20
Medium temperature: 0...80 °C
Ambient temperature: 0...60 °C
Protection: IP 67
Display: Display unit: 3 x LED green ; Switching status: 4 x LED yellow ; Level: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories
Type: LR8010
| Accuracy / Deviations | |
| Repeatability | ± 5 mm |
| Measurement error | ± 7 mm |
| Offset error | 5 mm |
| Resolution | 1 mm |
| Temperature influence per 10 K | ± 0,2 % |
| Approvals / tests | |
| Approval | WHG; General building authority approval; Overfill protection |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 / in closed metal enclosure; DIN EN 61000-6-4 / in plastic or open metal enclosure |
| Shock resistance | DIN EN 60068-2-27 / 50 g (11 ms) / 25 g (6 ms) with reference rod 0.5 m |
| Vibration resistance | DIN EN 60068-2-6 / 5 g (10...2000 Hz) / 1 g (5...200 Hz) with reference bar 0.5 m |
| MTTF | 198 years |
| Displays / controls | |
| Indication | Display unit / 3 x LED, green; Switching state / 4 x LED, yellow; Fill level / alphanumeric display, 4-digit; Parameter setting / alphanumeric display, 4-digit |
| Electrical connection | |
| Plug connection | 1 x M12; Coding: A; Contacts: 7, gold-plated |
| Electrical data | |
| Operating voltage | 18...30 DC V |
| Electricity consumption | < 30 mA |
| Protection class | III |
| Standby delay time | < 3 s |
| Measurement principle | Guided microwave |
| Reverse polarity protection | |
| Environmental conditions | |
| Ambient temperature | 0...60 °C |
| Storage temperature | -25...80 °C |
| Degree of protection | IP 67 |
| Field of application | |
| Special feature | Gold-plated contacts |
| Application | for industrial use |
| Mounting | Operate only in combination with probe rod and coaxial tube |
| Media | liquid media |
| Dielectric constant of medium | ≥ 2 |
| Recommended media | Water; water-based media; water-based coolant lubricants; oils; oil-based media |
| Not suitable for | See instruction manual, chapter "Intended use". |
| Process temperature | 0...80; (see note under Remarks) °C |
| Compressive strength | 4 bar / 0.4 MPa |
| Vacuum tightness | -500 mbar / -0.05 MPa |
| Interfaces | |
| Communication interface | IO-Link |
| Transmission type | COM2 (38.4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Required master port class | A |
| Analog process data | 1 |
| Process data binary | 4 |
| Min. process cycle time | 2,3 ms |
| Supported DeviceIDs | Operating mode / DeviceID; default / 1250 |
| SIO mode | |
| Measurement / adjustment range | |
| Active area A | L-40; (when set to oil and oil-based media: L-60) mm |
| Inactive zone I1 / I2 | 30 / 10; (at setting for oil and oil-based media: 30 / 30) mm |
| Measurement frequency | 4 Hz |
| Switching point SP | 15...L-30 mm |
| Switching point SP note | when set to oil and oil-based media: 35...L-30 |
| Reverse switch point rP | 10... L-35 mm |
| Note on reverse switching point rP | when set to oil and oil-based media: 30...L-35 |
| In steps of | 5 mm |
| Hysteresis | > 5 mm |
| Overfill switch point OP | 70...L-30 mm |
| Hysteresis OP | 10 mm |
| Mechanical data | |
| Dimensions | Ø 50 / L = 99 mm |
| Materials | 1.4404 (stainless steel / 316L); 1.4301 (stainless steel / 304); FKM; PBT; PC; PEI; TPE-V |
| Materials in contact with the medium | Sensor:: 1.4305 (stainless steel / 303); 1.4435 (stainless steel / 316L); PTFE; FKM; NBR reinforced; Probe rod:: 1.4404 (stainless steel / 316L); Coaxial tube:: 1.4301 (stainless steel / 304); 1.4404 (stainless steel / 316L); 1.4310 (stainless steel / 301); PPS reinforced |
| Outputs | |
| Total number of outputs | 4 |
| Output signal | Switching signal |
| Electrical version | PNP |
| Number of digital outputs | 4 |
| Output function | Normally open contact (NO) / Normally closed contact (NC); (configurable) |
| Max. voltage drop switching output DC | 2,5 V |
| Continuous current rating of switching output DC | 200 mA |
| Short-circuit protection type | thermal, timed |
| Short-circuit protection | |
| Overload resistant | |
| Product features | |
| Number of inputs and outputs | Number of digital outputs: 4 |
| Rod length L | 100...1600 mm |
| Process connection | threaded connection G 3/4 male thread |
| Remarks | |
| Notes | For high process temperatures: The relevant temperature is at the process connection. The actual medium temperature may be higher. |
Questions & answers
What is the delivery time of Ifm Electronic LR8010 level sensor PNP rod L=100...1600 mm 4 bar G 3/4 external?
The article Ifm Electronic LR8010 level sensor PNP rod L=100...1600 mm 4 bar G 3/4 external is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Ifm Electronic LR8010 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Ifm Electronic LR8010 level sensor PNP rod L=100...1600 mm 4 bar G 3/4 external always at the best possible price. We can give you a discount of 2% on Ifm Electronic LR8010 level sensor PNP rod L=100...1600 mm 4 bar G 3/4 external if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.