Accuracy / Deviations
Repeatability	± 5 mm
Measurement error	± 7 mm
Offset error	5 mm
Resolution	1 mm
Temperature influence per 10 K	± 0,2 %
Approvals / tests
Approval	WHG; General building authority approval; Overfill protection
EMC	DIN EN 61000-6-2; DIN EN 61000-6-3 / in closed metal enclosure; DIN EN 61000-6-4 / in plastic or open metal enclosure
Shock resistance	DIN EN 60068-2-27 / 50 g (11 ms) / 25 g (6 ms) with reference rod 0.5 m
Vibration resistance	DIN EN 60068-2-6 / 5 g (10...2000 Hz) / 1 g (5...200 Hz) with reference bar 0.5 m
MTTF	198 years
Displays / controls
Indication	Display unit / 3 x LED, green; Switching state / 4 x LED, yellow; Fill level / alphanumeric display, 4-digit; Parameter setting / alphanumeric display, 4-digit
Electrical connection
Plug connection	1 x M12; Coding: A; Contacts: 7, gold-plated
Electrical data
Operating voltage	18...30 DC V
Electricity consumption	< 30 mA
Protection class	III
Standby delay time	< 3 s
Measurement principle	Guided microwave
Reverse polarity protection
Environmental conditions
Ambient temperature	0...60 °C
Storage temperature	-25...80 °C
Degree of protection	IP 67
Field of application
Special feature	Gold-plated contacts
Application	for industrial use
Mounting	Operate only in combination with probe rod and coaxial tube
Media	liquid media
Dielectric constant of medium	≥ 2
Recommended media	Water; water-based media; water-based coolant lubricants; oils; oil-based media
Not suitable for	See instruction manual, chapter "Intended use".
Process temperature	0...80; (see note under Remarks) °C
Compressive strength	4 bar / 0.4 MPa
Vacuum tightness	-500 mbar / -0.05 MPa
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38.4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Required master port class	A
Analog process data	1
Process data binary	4
Min. process cycle time	2,3 ms
Supported DeviceIDs	Operating mode / DeviceID; default / 1250
SIO mode
Measurement / adjustment range
Active area A	L-40; (when set to oil and oil-based media: L-60) mm
Inactive zone I1 / I2	30 / 10; (at setting for oil and oil-based media: 30 / 30) mm
Measurement frequency	4 Hz
Switching point SP	15...L-30 mm
Switching point SP note	when set to oil and oil-based media: 35...L-30
Reverse switch point rP	10... L-35 mm
Note on reverse switching point rP	when set to oil and oil-based media: 30...L-35
In steps of	5 mm
Hysteresis	> 5 mm
Overfill switch point OP	70...L-30 mm
Hysteresis OP	10 mm
Mechanical data
Dimensions	Ø 50 / L = 99 mm
Materials	1.4404 (stainless steel / 316L); 1.4301 (stainless steel / 304); FKM; PBT; PC; PEI; TPE-V
Materials in contact with the medium	Sensor:: 1.4305 (stainless steel / 303); 1.4435 (stainless steel / 316L); PTFE; FKM; NBR reinforced; Probe rod:: 1.4404 (stainless steel / 316L); Coaxial tube:: 1.4301 (stainless steel / 304); 1.4404 (stainless steel / 316L); 1.4310 (stainless steel / 301); PPS reinforced
Outputs
Total number of outputs	4
Output signal	Switching signal
Electrical version	PNP
Number of digital outputs	4
Output function	Normally open contact (NO) / Normally closed contact (NC); (configurable)
Max. voltage drop switching output DC	2,5 V
Continuous current rating of switching output DC	200 mA
Short-circuit protection type	thermal, timed
Short-circuit protection
Overload resistant
Product features
Number of inputs and outputs	Number of digital outputs: 4
Rod length L	100...1600 mm
Process connection	threaded connection G 3/4 male thread
Remarks
Notes	For high process temperatures: The relevant temperature is at the process connection. The actual medium temperature may be higher.

Electronic level sensor, DC PNP, Guided wave radar, Freely rotatable housing 360°, General building authority approval: Z-65.16-529, Overflow protection, Only use with a rod + a coaxial pipe, Connector, 4-digit alphanumeric display, 4 switching outputs (one of them for overflow protection according to the German Federal Water Act (WHG)), 4-digit alphanumeric display
Application: Hydrous coolants, oils, oil-based media, water, media similar to water
Operating voltage: 18...30 V DC
Electrical design: DC PNP
Output function: 3 x NO / NC programmable;, 1 x NC (WHG - German Federal Water Act)
Current rating: 200 mA
Probe length L: 100...1600 mm
Active range A: L-40 (L-60) mm
Connection: M12 connector (according to EN 61076-2-101)
Housing materials: stainless steel 316L / 1.4404; stainless steel (304S15); FKM; PBT-GF 20; PC; PEI; TPV
Materials (wetted parts): stainless steel (303S22); probe connection: stainless steel 316L / 1.4435; PTFE; FKM; sealing: NBR-PPTA 20
Medium temperature: 0...80 °C
Ambient temperature: 0...60 °C
Protection: IP 67
Display: Display unit: 3 x LED green ; Switching status: 4 x LED yellow ; Level: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories

Type: LR8010