HOBBES 256555 NetFinder PRO content_copy

Hobbes NETfinder Pro is the advanced version of Hobbes NETfinder. This new development includes the function of a cable organizer, which allows to work with up to 18 remote units connected. This means that the device can identify hub or switch ports and cables up to 18 different locations can simultaneously test. Each remote unit is equipped for rapid identification by an LED. The Cable Organizer function enables the rapid and efficient identification of a larger number of defective cables at the same time. Cable tests on open, shorted, miss-wired and crossed wire pairs are easily possible in the pin to pin method. In addition to rj45 network cables and RJ11 telephone cable can be tested. - 18 remote units for easy identification of cables in large installations - Very compact design - Test for the following error: open. shorted, turned and crossed wires - Test the Kabelabschiermung - remote unit that allows the installer allows cable also to test alone - Port Finder feature a cable to the switch / hub to track back - Easy to read display - high-speed test of the cable - tone function - Including Leather case for secure transport NETfinder The Pro is the latest development from the LANtest ​​cable tester family. With a new board layout NETfinder is to test the location and cable according to the latest specifications safely. The NETfinder Pro is the consistent further development of the LANtest ​​kit, allowing the user to quickly error in all göängigen network cables determine. The NETfinder Pro is a tone generator equipped, which allows to send a signal through the cable which can be identified with the sample of Hobbes. If the cables are not to be labeled, so it's now a breeze to get to this new labeling and order into the existing wiring. NETfinder The Pro is also equipped with a Port Finder function as it is also known from the LANID Pro. With this function it is now possible to identify in an active network cable. By the transmitted signal NETfinder of the tested cable to the hub or switch can be identified because the HUB or switch displays an activity on the corresponding port. NETfidner The Pro features compared to normal NETfinder version with an organizational function. The 18 units included remote for easy identification of cables can be used. That is inherited cabling can now be easily relabelled.