HELU MULTIFLEX 512®-PUR UL/CSA HELUKABEL Multispeed M-FLEX 512-PUR UL/CSA 18G1

Technical data:

Special drag chain cable for extreme mechanical stresses according to UL Style 20939
Temperature range moving -30°C to +80°C stationary -40°C to +80°C
Nominal voltage UL/CSA 600 V
Test voltage 3000 V
Insulation resistance min. 100 MOhm x km
Minimum bending radius moving 5x cable Ø stationary 3x cable Ø
Alternating bending test tested with approx. 10 million alternating bending cycles
Radiation resistance up to 50x106 cJ/kg (up to 50 Mrad)
Structure:
Bare copper wire, extra-fine wire according to DIN VDE 0295 cl.6, column 4, BS 6360 cl.6 or IEC 60228 cl.6
Core insulation made of special PP Core
identification according to DIN VDE 0293 Black cores with continuous white numbering
Cores with optimal lay lengths stranded in layers
Special protective wrapping over each stranding layer (from 4 mm² without protective wrapping over the outer layer)
Outer jacket made of special full polyurethane TMPU, in accordance with DIN VDE 0207-363-10-2/ DIN EN 50363-10-2
Jacket color: gray (RAL 7001) with meter marking
Properties:
very good oil resistance
ensures continuous use in multi-shift operation with extremely high bending
stresses low
adhesion very high resistance to mechanical stress
very good alternating bending strength
longer service life due to low friction resistance of the TPE-insulated wires
high tear, abrasion and impact resistance even at low temperatures
resistant to weather influences, ozone and UV rays, solvents, acids and alkalis and hydrolysis
PUR outer jacket self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 , UL VW-1, CSA FT1
Notes:
'cleanroom qualified\lashshielded analogue type: MULTIFLEX 512-C-PUR UL/CSA
Use:
These UL/CSA approved special drag chain cables are used for permanently flexible loads in machine and tool construction, in robot technology and on permanently moving machine parts, for continuous use in multi-shift operation. With free movement without tensile stress and without forced movement control, they have proven themselves convincingly in drag chain use. It is a highly flexible control cable developed according to the latest state of the art, with slippery PP core insulation and a cut-resistant and low-adhesion PUR outer jacket that guarantees optimum service life and very high cost-effectiveness. For applications that go beyond standard solutions (e.g. in composting plants or high-bay conveyor systems with extremely high travel speeds, etc.), we recommend that you use our questionnaire for energy supply systems in the introduction. For use in energy supply chains, please observe the assembly instructions.
Standard lengths: 500 m, 1000 m
Subject to technical changes.
Type: MULTIFLEX 512®-PUR UL/CSA

The item price shown refers to 500 meters Helukabel 21587-500