Installation Material from HellermannTyton

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1237633

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048214

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1 - 3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Familie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 705707

2-part cable tie with base part, pre-assembled. The head of the tie can be brought into the optimal bundle position. Perfect form fit on the bundled goods thanks to the H-design. Very robust design. Good alternative to metal clamps. Withstands vibrations and displacement forces. High tightening torque thanks to the metal bushing. Heavy-duty mounts are used by automobile and truck manufacturers, particularly on engine wiring harnesses. These parts are also used in other areas with difficult requirements.
Sales unit: 50 pieces
Lieske Part No.: 2058370

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 500 pieces
Lieske Part No.: 2058137

Rustproof stainless steel cable ties (316), equipped with RFID transponders. Particularly suitable for applications in harsh environments. With patented, non-removable locking head. Flexible, contactless data communication. Clear identification of objects through unique numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Available as high frequency (HF/13.56 MHz) version and ultra high frequency (UHF/869 MHz) version. Rewritable. Signal color red as standard for better findability, black coating on request. RFID cable ties offer an innovative solution for clear and quick product identification. The cable ties made of stainless steel type 316 are equipped with a transponder and are ideal for all areas with high demands on holding power and durability in adverse environments. The numerous advantages of a cable tie are combined with RFID technology. This labeling solution is used primarily for securing, serializing, tracking and identifying products in the areas of asset management, electrical testing, inventory, rental and leasing services as well as maintenance and repair.
Sales unit: 50 pieces
Lieske Part No.: 1142227

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 1000 pieces
Lieske Part No.: 2058138

Fastening clips can be freely rotated by 360°. Simply clip onto hose, pipe or cable. For parallel guidance of two bundles at a defined distance. Also suitable for subsequent installation. This particularly easy-to-install series connects two bundled goods of different sizes and types. The mobility of the fastening element offers a secure hold even under difficult conditions, such as vibrations, and protects the cables or bundles.
Sales unit: 4000 pieces
Lieske Part No.: 2058150

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Einsetzbar z. B. im Schaltschrank- und Fahrzeugbau.
Sales unit: 5000 pieces
Lieske Part No.: 705670

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058128

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1 - 3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Familie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 3000 pieces
Lieske Part No.: 705714

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058129

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1-3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Serie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 838330

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1-3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Serie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 838887

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive industry.
Sales unit: 500 pieces
Lieske Part No.: 2058147

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries.
Sales unit: 500 pieces
Lieske Part No.: 2058133

Type: T50ROSEC19 PA66HS,PA66HIRHS BK 500 ST

Sales unit: 500 pieces
Lieske Part No.: 838389

Type: T50ROSEC9-MC5-BK-D1

Sales unit: 500 pieces
Lieske Part No.: 542786

Type: T50SOSFT5-MC5-BK-D1

Sales unit: 500 pieces
Lieske Part No.: 100152

Kopf des Einteilers nimmt montiert definierte Position ein. Einfache Montage, werkzeugfrei. Hohe Auszugs- und Haltekraft, auch bei Belastungen aus unterschiedlichen Richtungen. Teller schützt vor eindringendem Schmutz und Staub. Diverse Blechdicken finden Verwendung mit einem einzelnen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Versionen für Ovallöcher dienen der Verdrehsicherung. Der Binder wurde hauptsächlich für die Befestigung von Kabelbäumen in der Automobilindustrie entwickelt. Aufgrund seiner einfachen und benutzerfreundlichen Anwendung kommt der Befestigungsbinder auch in anderen Branchen zum Einsatz, z. B. in der Luftfahrt, bei Schaltanlagen und in der Herstellung von Haushaltsgeräten.
Sales unit: 1500 pieces
Lieske Part No.: 1570499

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. High pull-out and holding force, even when subjected to loads from different directions. Integrated plate protects against dirt and dust penetration. Various sheet thicknesses can be used with a single slatted base. Also for blind holes with thread. This fastening tie is used in car body construction, the electrical industry and in control cabinet construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 667409

Kopf des Einteilers nimmt montiert definierte Position ein. Einfache Montage, werkzeugfrei. Hohe Auszugs- und Haltekraft, auch bei Belastungen aus unterschiedlichen Richtungen. Schützt vor eindringendem Schmutz und Staub durch integrierten Teller. Diverse Blechdicken finden Verwendung mit einem einzelnen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Eingesetzt wird dieser Befestigungsbinder z. B. im Karosseriebau, in der Elektroindustrie und im Schaltschrankbau.
Sales unit: 500 pieces
Lieske Part No.: 705697

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. Bundled goods are guided very close to the bolt. Primarily developed for the automotive industry, these welding bolt holders are also used in all other areas where cables and lines need to be guided safely using welding or threaded bolts.
Sales unit: 500 pieces
Lieske Part No.: 2049030

For guiding and protecting cables and lines. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters, colors and materials. SBPE spiral hoses are particularly suitable for applications in cable assembly as well as in control cabinet and plant construction. The 30 m packaging is ideal for many industrial applications. For smaller requirements, the spiral hoses in sizes 4, 6 and 9 are also available in practical 5 m lengths.
Sales unit: 30 meters
Lieske Part No.: 269851

Type: SBPE1.5-PE-BK-30M

Sales unit: 30 meters
Lieske Part No.: 553535

For guiding and protecting cables and lines. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters, colors and materials. SBPE spiral hoses are particularly suitable for applications in cable assembly as well as in control cabinet and plant construction. The 30 m packaging is ideal for many industrial applications. For smaller requirements, the spiral hoses in sizes 4, 6 and 9 are also available in practical 5 m lengths.
Sales unit: 30 meters
Lieske Part No.: 1242557

For guiding and protecting cables and lines. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters, colors and materials. SBPE spiral hoses are particularly suitable for applications in cable assembly as well as in control cabinet and plant construction. The 30 m packaging is ideal for many industrial applications. For smaller requirements, the spiral hoses in sizes 4, 6 and 9 are also available in practical 5 m lengths.
Sales unit: 30 meters
Lieske Part No.: 532711

Type: SBPE4,SCHWARZ,30M

Sales unit: 30 meters
Lieske Part No.: 981646

For guiding and protecting cables and lines. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters, colors and materials. SBPE spiral hoses are particularly suitable for applications in cable assembly as well as in control cabinet and plant construction. The 30 m packaging is ideal for many industrial applications. For smaller requirements, the spiral hoses in sizes 4, 6 and 9 are also available in practical 5 m lengths.
Sales unit: 30 meters
Lieske Part No.: 993321

Type: SBPE4D-PE-NA-5M

Sales unit: 5 pieces
Lieske Part No.: 452715

Type: SBPE4D-PE-BK-5M

Sales unit: 5 pieces
Lieske Part No.: 806864

For guiding and protecting cables and lines. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters, colors and materials. SBPE spiral hoses are particularly suitable for applications in cable assembly as well as in control cabinet and plant construction. The 30 m packaging is ideal for many industrial applications. For smaller requirements, the spiral hoses in sizes 4, 6 and 9 are also available in practical 5 m lengths.
Sales unit: 5 meters
Lieske Part No.: 2055810

Für das Führen und Schützen von Kabeln und Leitungen. Nachträglich montierbar. Kabel können an jeder Stelle, in jede Richtung ausgeführt werden. Vielzahl von Durchmessern, Farben und Materialien. SBPE Spiralschläuche eignen sich besonders für Anwendungen in der Kabelkonfektion sowie im Schaltschrank- und Anlagenbau. Die 30 m Verpackung ist optimal für viele industrielle Anwendungen geeignet. Für kleinere Bedarfe sind die Spiralschläuche in den Größen 4, 6 und 9 zusätzlich in praktischen 5-m-Längen erhältlich.
Sales unit: 2640 meters
Lieske Part No.: 1296560

Type: SBPE9,SCHWARZ,30M

Sales unit: 30 meters
Lieske Part No.: 959142

Type: SBPE9,GRAU,30M

Sales unit: 30 meters
Lieske Part No.: 526806

Type: SBPE9D-PE-NA-5M

Sales unit: 5 pieces
Lieske Part No.: 207277

Type: SBPE9D-PE-BK-5M

Lieske Part No.: 394155

Type: SBPE9D-PE-GY-5M

Sales unit: 5 pieces
Lieske Part No.: 584535

Type: SBPE16,NATUR,30M

Sales unit: 30 meters
Lieske Part No.: 825343

Type: SBPE16,SCHWARZ,30M

Sales unit: 30 meters
Lieske Part No.: 104567

Type: SBPE16,GRAU,30M

Sales unit: 30 meters
Lieske Part No.: 949462

Type: SBPA4 PA6 NA 30 M

Sales unit: 30 meters
Lieske Part No.: 271200

For guiding and protecting cables and lines. Very good abrasion protection. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters. SBPA spiral hoses are used primarily in the automotive sector and in cable assembly.
Sales unit: 30 meters
Lieske Part No.: 262400

Type: SBPA16 PA6 NA 30 M

Sales unit: 30 meters
Lieske Part No.: 973485

For guiding and protecting cables and lines. Self-extinguishing according to UL94 V2. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters and colors. SBPEFR spiral hoses are used primarily in areas with increased fire protection requirements, such as in the automotive sector and the electrical industry.
Sales unit: 30 meters
Lieske Part No.: 634103

Type: SBPEFR1.5-BK

Sales unit: 30 meters
Lieske Part No.: 304606

Type: SBPEFR4-WH

Sales unit: 30 meters
Lieske Part No.: 757169

For guiding and protecting cables and lines. Self-extinguishing according to UL94 V2. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters and colors. SBPEFR spiral hoses are used primarily in areas with increased fire protection requirements, such as in the automotive sector and the electrical industry.
Sales unit: 30 meters
Lieske Part No.: 200422

For guiding and protecting cables and lines. Self-extinguishing according to UL94 V2. Can be retrofitted. Cables can be routed anywhere, in any direction. Wide range of diameters and colors. SBPEFR spiral hoses are used primarily in areas with increased fire protection requirements, such as in the automotive sector and the electrical industry.
Sales unit: 30 meters
Lieske Part No.: 848643

Type: SBPEFR9-BK

Sales unit: 30 meters
Lieske Part No.: 282968