Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A
|
95,66 EUR |
|||||||||||
|
( 113,84 EUR incl. VAT ) ≈ £80.07 | ≈ $105.13 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >100 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 143169 | ||||||||||
| Mfg Part No: | CDA225D | ||||||||||
| UPC/EAN: | 3250611610038 | ||||||||||
| Weight: | 0.181 kg | ||||||||||
| Type: | CDA225D | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Hager CDA225D:
Residual current circuit breaker of type A provides detection of pulsating direct current residual currents, which may occur with modern electronic devices such as computers, LED lighting, or chargers. This protection type is therefore particularly important in installations where such devices are connected. The protection class IP20 means that the switch is protected against contact with fingers and against solid foreign objects up to 12.5 mm, but not against water or dust. It is thus suitable for indoor use, but not for outdoor or damp environments. The operating temperature ranges from -25 °C to 40 °C, with the maximum operating temperature being 40 °C. The maximum altitude for use is 2000 meters above sea level.
Mounting method is on DIN rail, enabling standardized and quick installation in distribution boards. The width is 2 module units, corresponding to a physical width of 35 mm. The mounting depth is 70 mm, and the overall height of the device is 83 mm. The connection terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The nominal torque is 2.80 Nm for both terminals. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The power loss is 2.32 W under rated operation.
Compatibility and accessories include various cable bridges such as K67L (NYAF 10 mm², 250 mm long, fork) or K67E (NYAF 6 mm², 250 mm long), which can be used to connect conductors. Phase bar models such as KDN263A (2P, fork, 10 mm², 63 A) or KDN451D (3P+N, fork, 16 mm², 80 A) are also available and can be used to extend the installation. Additionally, contacts such as CZ001 (for RCD, 2(2S+2Ö), 6 A, 240 V) as well as locking devices such as MZN175 or spacers such as LZ060 for heat dissipation are available. These components enable flexible and expandable installation, especially in larger distributions.
Functions and equipment in detail include the possibility to attach additional devices, facilitating adaptation to specific requirements. The integrated locking device enables secure and controlled switching off, especially during maintenance work. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.
Operational advantages lie in the combination of high safety, compact design, and standard-compliant mounting. The detection of pulsating direct current residual currents increases safety in modern electrical installations. The use of biconnect terminals on the lower side simplifies installation and maintenance. Compliance with VDE standards and EN standards ensures that the switch can be used without problems in Germany and other European countries. Mounting on DIN rail enables flexible integration into existing distribution systems.
Technology explained simply shows that the switch automatically disconnects at a residual current of 30 mA to prevent electric shock. The rated voltage of 230 V and frequency of 50 Hz match the usual networks in Germany. The IP20 protection class protects against contact, but not against moisture, which is why use is recommended exclusively indoors. The short-circuit withstand capability of 6 kA ensures that the switch safely disconnects even under high short-circuit currents without damage. The power loss of 2.32 W is low and does not significantly affect the energy efficiency of the installation.
Applications include installation in residential buildings, commercial enterprises, office buildings, and other indoor spaces where electrical safety is of high priority. The switch is particularly suitable for circuits supplying socket outlets, lighting, or electronic devices. Use in combination with other switches or fuses in a distribution board enables structured and safe power supply. The possibility to attach additional devices extends functionality, for example for remote monitoring or signaling systems.
Mounting and installation is done by securing to a DIN rail in the distribution board. The terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The nominal torque is 2.80 Nm. The mounting depth of 70 mm must be considered when installing in the distribution board. Mounting takes place in an environment with an ambient temperature up to 40 °C and a maximum altitude of 2000 meters above sea level. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.
Operational advantages lie in the combination of high safety, compact design, and standard-compliant mounting. The detection of pulsating direct current residual currents increases safety in modern electrical installations. The use of biconnect terminals on the lower side simplifies installation and maintenance. Compliance with VDE standards and EN standards ensures that the switch can be used without problems in Germany and other European countries. Mounting on DIN rail enables flexible integration into existing distribution systems.
Technology explained simply shows that the switch automatically disconnects at a residual current of 30 mA to prevent electric shock. The rated voltage of 230 V and frequency of 50 Hz match the usual networks in Germany. The IP20 protection class protects against contact, but not against moisture, which is why use is recommended exclusively indoors. The short-circuit withstand capability of 6 kA ensures that the switch safely disconnects even under high short-circuit currents without damage. The power loss of 2.32 W is low and does not significantly affect the energy efficiency of the installation.
Applications include installation in residential buildings, commercial enterprises, office buildings, and other indoor spaces where electrical safety is of high priority. The switch is particularly suitable for circuits supplying socket outlets, lighting, or electronic devices. Use in combination with other switches or fuses in a distribution board enables structured and safe power supply. The possibility to attach additional devices extends functionality, for example for remote monitoring or signaling systems.
Mounting and installation is done by securing to a DIN rail in the distribution board. The terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The nominal torque is 2.80 Nm. The mounting depth of 70 mm must be considered when installing in the distribution board. Mounting takes place in an environment with an ambient temperature up to 40 °C and a maximum altitude of 2000 meters above sea level. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.
| General | |
| Number of poles | 2 |
| Rated voltage | 230 V |
| Rated current | 25 A |
| Rated fault current | 0.03 A |
| Rated insulation voltage Ui | 500 V |
| Rated impulse withstand voltage Uimp | 4 kV |
| Mounting method | DIN rail |
| Leakage current type | A |
| Short-circuit breaking capacity (Icw) | 6 kA |
| Surge current capacity | 0.25 kA |
| Frequency | 50 Hz |
| Degree of protection (IP) | IP20 |
| Width in number of modular spacings | 2 |
| Built-in depth | 70 mm |
| Ambient temperature during operating | 40 °C |
| Pollution degree | 2 |
| Connectable conductor cross section multi-wired | 16 mm² |
| Connectable conductor cross section solid-core | 25 mm² |
| Power loss | 2.32 W |
| RAL-number (akin) | 7005 |
| Voltage type | AC |
| Selective protection | |
| Short-time delayed tripping | |
| Additional equipment possible | |
| With interlocking device | |
| Explosion-proof | |
Questions & answers
What is the delivery time of Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A?
The article Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Hager CDA225D to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A always at the best possible price. We can give you a discount of 2% on Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A we can offer you a price of 84,90 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Hager CDA225D residual current circuit breaker 2-pole 6kA 25A 30mA type A
|
Hager K67E cable bridge NYAF 6 mm² 250 mm long
The K67E cable bridge from Hager is a single component for electrical installation, specifically designed for safe and durable connection of cables in modular mounting. The device serves as an ...Lieske Part No.: 113135 Mfg Part No: K67E |
1,41 EUR
![]() ≈ £1.18 | ≈ $1.55
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67L cable bridge NYAF 10 mm² 250 mm long fork
The K67L cable bridge from Hager is a specific component for electrical installation, designed to connect two distribution rows in wall- or floor-mounted enclosures. With a nominal cross-section of 10 ...Lieske Part No.: 114349 Mfg Part No: K67L |
4,75 EUR
![]() ≈ £3.98 | ≈ $5.22
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager LZ060 spacing piece for heat dissipation
The LZ060 spacing piece from Hager is a specially developed component for heat dissipation in installation switchboxes and modular devices. It serves as a thermal spacer between electrical components ...Lieske Part No.: 178169 Mfg Part No: LZ060 |
3,37 EUR
![]() ≈ £2.82 | ≈ $3.70
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67M cable bridge NYAF 10 mm² 250 mm long pin
The K67M cable bridge from Hager is an installation cable designed for use in distribution boards and switchgear. It provides a secure and reliable connection between electrical components, ...Lieske Part No.: 229676 Mfg Part No: K67M |
6,27 EUR
![]() ≈ £5.25 | ≈ $6.89
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67F cable bridge NYAF 6 mm² 100 mm long
The K67F cable bridge from Hager is an electrical connection element for use in distributors and meter enclosures. It is designed for the safe and durable connection of conductors with a nominal ...Lieske Part No.: 422593 Mfg Part No: K67F |
1,03 EUR
![]() ≈ £0.86 | ≈ $1.13
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager MZN175 locking device for LS, FI, FI-LS 1
Locking device for circuit breakers FI-switch FI-LS-switchLieske Part No.: 565350 Mfg Part No: MZN175 |
8,46 EUR
![]() ≈ £7.08 | ≈ $9.30
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN451E phase busbar 3P+N fork 16 mm² 80 A 57M
Compact phase busbars Type: 6-FI / LS switch, 4-pole, L + N, N + L2, L3 + N, ... Cross section: 6 mm ² Type: KDN45 E item: ST. Lieske Part No.: 860375 Mfg Part No: KDN451E |
148,77 EUR
![]() ≈ £124.52 | ≈ $163.50
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager KDN263A phase busbar 2P fork 10 mm² 63 A 12M
Phase rail 2-pole with fork connection 10mm² 63A 12 modules. Phase rail for suitable modular devices.Lieske Part No.: 867168 Mfg Part No: KDN263A |
12,63 EUR
![]() ≈ £10.57 | ≈ $13.88
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KDN451D phase bar 3P+N fork 16 mm² 80A 12M 215 mm long
Compact phase busbars Type: 27 for FI / LS switch, 4-pole, L + N, N + L2, L3 + N, ... Cross section: 6 mm ² Type: KDN45 D item: ST. Lieske Part No.: 871201 Mfg Part No: KDN451D |
31,82 EUR
![]() ≈ £26.63 | ≈ $34.97
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager K67G cable bridge NYAF 6 mm² 250 mm long
for connecting two distribution rows Material: H 7V-K cross-section: 6 mm ² Length: 25 mm Type: K67G item: ST. Lieske Part No.: 886763 Mfg Part No: K67G |
1,99 EUR
![]() ≈ £1.67 | ≈ $2.19
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Hager CZ001 contact for RCD switch 2(2NO+2NC) 6A 240V
Accessories for RCD more auxiliary switches on request Design: 2 NO, 2 NC GA for 2 -, 4-pol. FI of 6-63 A Type: CZ ST. Lieske Part No.: 961035 Mfg Part No: CZ001 |
43,03 EUR
![]() ≈ £36.02 | ≈ $47.29
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|















