Hager CDA225D, EAN: 3250611610038

Hager CDA225D RCD 2-pole 25A

Installation > Modular devices / equipment installation > RCD

Hager CDA225D RCD 2-pole 25A

Lieske Part No. 143169
Mfg Part No CDA225D
EAN-Code 3250611610038
Manufacturer Hager
Here only 95,66 EUR
113,84 EUR incl. VAT

Further information for Hager CDA225D RCD 2-pole 25A

General
Number of poles2
Rated voltage230 V
Rated current25 A
Rated fault current0.03 A
Rated insulation voltage Ui500 V
Rated impulse withstand voltage Uimp4 kV
Mounting methodDIN rail
Leakage current typeA
Short-circuit breaking capacity (Icw)6 kA
Surge current capacity0.25 kA
Frequency50 Hz
Degree of protection (IP)IP20
Width in number of modular spacings2
Built-in depth70 mm
Ambient temperature during operating40 °C
Pollution degree2
Connectable conductor cross section multi-wired16 mm²
Connectable conductor cross section solid-core25 mm²
Power loss2.32 W
RAL-number (akin)7005
Voltage typeAC
Selective protectionno
Short-time delayed trippingno
Additional equipment possibleyes
With interlocking deviceyes
Explosion-proofno
The residual current circuit breaker CDA225D from Hager is a 2-pole RCD with a rated current of 25 A and a rated residual current of 30 mA. It is designed for use in electrical installations in residential and commercial buildings, particularly in circuits with socket outlets and lighting systems, where high protection against electric shock is required. The switch detects both alternating current and pulsating direct current residual currents, making it suitable for applications with electronic devices that may generate pulsating residual currents. It complies with standards EN 61008-1, EN 61008-2-1 as well as VDE 0664 Part 10 and 11, thus providing standard-compliant protection according to electrical engineering requirements. The rated voltage is 230 V, the rated insulation voltage Ui is 500 V, and the rated impulse voltage withstand is 4 kV. The frequency is fixed at 50 Hz, and the voltage type is alternating current (AC). The short-circuit withstand capability (Icw) is 6 kA, ensuring sufficient protection against short circuits. The impulse current withstand is 0.25 kA.

Residual current circuit breaker of type A provides detection of pulsating direct current residual currents, which may occur with modern electronic devices such as computers, LED lighting, or chargers. This protection type is therefore particularly important in installations where such devices are connected. The protection class IP20 means that the switch is protected against contact with fingers and against solid foreign objects up to 12.5 mm, but not against water or dust. It is thus suitable for indoor use, but not for outdoor or damp environments. The operating temperature ranges from -25 °C to 40 °C, with the maximum operating temperature being 40 °C. The maximum altitude for use is 2000 meters above sea level.

Mounting method is on DIN rail, enabling standardized and quick installation in distribution boards. The width is 2 module units, corresponding to a physical width of 35 mm. The mounting depth is 70 mm, and the overall height of the device is 83 mm. The connection terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The nominal torque is 2.80 Nm for both terminals. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The power loss is 2.32 W under rated operation.

Compatibility and accessories include various cable bridges such as K67L (NYAF 10 mm², 250 mm long, fork) or K67E (NYAF 6 mm², 250 mm long), which can be used to connect conductors. Phase bar models such as KDN263A (2P, fork, 10 mm², 63 A) or KDN451D (3P+N, fork, 16 mm², 80 A) are also available and can be used to extend the installation. Additionally, contacts such as CZ001 (for RCD, 2(2S+2Ö), 6 A, 240 V) as well as locking devices such as MZN175 or spacers such as LZ060 for heat dissipation are available. These components enable flexible and expandable installation, especially in larger distributions.

Functions and equipment in detail include the possibility to attach additional devices, facilitating adaptation to specific requirements. The integrated locking device enables secure and controlled switching off, especially during maintenance work. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.

Operational advantages lie in the combination of high safety, compact design, and standard-compliant mounting. The detection of pulsating direct current residual currents increases safety in modern electrical installations. The use of biconnect terminals on the lower side simplifies installation and maintenance. Compliance with VDE standards and EN standards ensures that the switch can be used without problems in Germany and other European countries. Mounting on DIN rail enables flexible integration into existing distribution systems.

Technology explained simply shows that the switch automatically disconnects at a residual current of 30 mA to prevent electric shock. The rated voltage of 230 V and frequency of 50 Hz match the usual networks in Germany. The IP20 protection class protects against contact, but not against moisture, which is why use is recommended exclusively indoors. The short-circuit withstand capability of 6 kA ensures that the switch safely disconnects even under high short-circuit currents without damage. The power loss of 2.32 W is low and does not significantly affect the energy efficiency of the installation.

Applications include installation in residential buildings, commercial enterprises, office buildings, and other indoor spaces where electrical safety is of high priority. The switch is particularly suitable for circuits supplying socket outlets, lighting, or electronic devices. Use in combination with other switches or fuses in a distribution board enables structured and safe power supply. The possibility to attach additional devices extends functionality, for example for remote monitoring or signaling systems.

Mounting and installation is done by securing to a DIN rail in the distribution board. The terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The nominal torque is 2.80 Nm. The mounting depth of 70 mm must be considered when installing in the distribution board. Mounting takes place in an environment with an ambient temperature up to 40 °C and a maximum altitude of 2000 meters above sea level. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.

Operational advantages lie in the combination of high safety, compact design, and standard-compliant mounting. The detection of pulsating direct current residual currents increases safety in modern electrical installations. The use of biconnect terminals on the lower side simplifies installation and maintenance. Compliance with VDE standards and EN standards ensures that the switch can be used without problems in Germany and other European countries. Mounting on DIN rail enables flexible integration into existing distribution systems.

Technology explained simply shows that the switch automatically disconnects at a residual current of 30 mA to prevent electric shock. The rated voltage of 230 V and frequency of 50 Hz match the usual networks in Germany. The IP20 protection class protects against contact, but not against moisture, which is why use is recommended exclusively indoors. The short-circuit withstand capability of 6 kA ensures that the switch safely disconnects even under high short-circuit currents without damage. The power loss of 2.32 W is low and does not significantly affect the energy efficiency of the installation.

Applications include installation in residential buildings, commercial enterprises, office buildings, and other indoor spaces where electrical safety is of high priority. The switch is particularly suitable for circuits supplying socket outlets, lighting, or electronic devices. Use in combination with other switches or fuses in a distribution board enables structured and safe power supply. The possibility to attach additional devices extends functionality, for example for remote monitoring or signaling systems.

Mounting and installation is done by securing to a DIN rail in the distribution board. The terminals are designed for screw connection, with the upper terminal intended for modular devices and the lower terminal designed for biconnect connections. The connection cross-sections are suitable for single-core conductors up to 25 mm² and multi-core conductors up to 16 mm². The nominal torque is 2.80 Nm. The mounting depth of 70 mm must be considered when installing in the distribution board. Mounting takes place in an environment with an ambient temperature up to 40 °C and a maximum altitude of 2000 meters above sea level. The device life is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period. RoHS compliance confirms that the device is manufactured without harmful substances, increasing environmental compatibility. The color corresponds approximately to RAL number 7005, which is a dark gray tone.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/143169
qrcode für Hager CDA225D RCD 2-pole 25A