Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Gustav Hensel Logo

Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54

Your rating:
Average rating
product review for Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54
( 4.5 / 5 ) 11 ratings
Gustav Hensel 6100230
This image may differ from the desired article.
Gustav Hensel 6100230Gustav Hensel 6100230
248,61 EUR 249,08 EUR
( 295,85 EUR incl. VAT )
≈ £208.09  |  ≈ $273.22
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
In Stock: 5 pieces
1x Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54
Datasheet:file_download Download
Lieske Part No.:252588
Mfg Part No: 6100230
UPC/EAN: 4012591622307
Weight:4.594 kg
Type:KV 3554

Product information for Gustav Hensel 6100230:

The Gustav Hensel small distribution board type KV 3554 is an automation housing made of high-quality thermoplastic (polystyrene), designed for surface-mounted applications in buildings or for protected outdoor installations. The housing offers a total of 54 mounting units (TE), distributed across three rows with 18 TE each, and is thus designed for mounting devices with snap-fastening on DIN support rails. The support rail spacing is 150 mm, ensuring compliance with the DIN 43880 standard. The integrated cable entry is achieved via elastic sealing membranes, enabling a watertight and dust-tight seal. The protection rating IP 54 safeguards the enclosure against dust and splashing water, making it suitable for outdoor use, provided the area is protected. The transparent door allows visual inspection of installed devices without opening the enclosure. An integrated accessory compartment and cover strips for the device cutout are also part of the housing. The cable entry panel ensures orderly cable routing and prevents unintended contamination.

Applications
The small distribution board is intended for use in buildings and protected outdoor areas, where installation is carried out on a wall or in a niche. The ambient temperature must range between -5 °C and +40 °C, with the maximum temperature over 24 hours not exceeding 35 °C. The relative humidity is up to 50 % at 40 °C and up to 100 % at 25 °C. At high temperatures and direct sunlight, the effects on installed equipment should be considered, particularly regarding condensation formation. The specifications for ambient temperature and humidity are crucial for the reliability of installed devices.

Functions and Equipment in Detail
The housing features a FIXCONNECT® terminal for N and PE conductors, ensuring a secure and reliable connection. The rated current of the terminal is 75 A, with devices installed in the housing allowed to have a maximum rated current of 63 A. The rated voltage is 400 V, and the rated insulation voltage is 690 V a.c. Protection class II ensures a double-insulated design, eliminating the need for additional earthing. The terminals are designed for various conductor cross-sections: push-in terminals for 1.5 mm² to 4 mm², screw terminals for 1.5 mm² to 25 mm², with the maximum number of conductors per terminal point varying by type. Cables can be introduced via metric pre-punchings M20 or elastic sealing membranes, with sealing ranges from 7 mm to 29 mm. The cable entry positions are located at the top and bottom of the housing wall.

Technology Explained Simply
The elastic sealing membranes ensure a tight seal of the cable openings, keeping dust and splashing water away from the interior of the enclosure. The IP protection rating IP 54 means the housing is dust-tight and protected against splashing water from all directions. The material polystyrene is halogen-free, silicone-free, and has a temperature resistance from -25 °C to +80 °C. The glow wire test according to IEC 60695-2-11 is 750 °C, confirming the fire protection quality of the material. The UL 94 classification V-2 indicates that the material exhibits limited flame spread in case of fire.

Compatibility and Accessories
Various accessories are available for this small distribution board, facilitating installation and operation. These include the Hensel AKM 20 mounting cable gland IP 54 with glow wire test IEC 960°C, the Hensel STM 20 step gland IP 54 M20 for metric pre-punching M20 with sealing range D=5-16 mm, the Hensel KV ES1 mounting lock for KV automation housings 12-54TE, and the Hensel ESM 20 insert gland IP 54 M20 grey for metric pre-punching M20. These components can be used as required to extend functionality or enhance safety.

Installation and Mounting
Mounting is carried out on a wall or in a niche, with the DIN support rail included in the delivery scope. The support rail spacing of 150 mm allows for mounting of standard devices. Cables are introduced through the designated openings using elastic sealing membranes or metric pre-punchings M20. The transparent door is secured with an integrated locking mechanism. Cover strips and labeling strips facilitate identification and proper completion of the installation.

Operational Advantages
The small distribution board offers high mechanical and electrical reliability. The integrated sealing membranes and IP 54 protection rating ensure a long service life even under demanding environmental conditions. The transparent door enables quick visual inspection of devices without opening the enclosure. The FIXCONNECT® terminals ensure a secure and durable connection of the conductors. The halogen-free and silicone-free material composition reduces fire hazard and protects the environment in case of fire.

The housing dimensions are 630 mm (height) × 403 mm (width) × 129 mm (depth). The net weight is 4.594 kg. Conformity with standards is ensured according to DIN EN 60670-1 and DIN EN 60670-24. Certification is carried out according to IEC 61439-3. The product number is 6100230, the EAN number is 4012591622307. The ETIM class is EC000214 – Small distribution board.

General
Degree of protectionIP54
Rated voltage400 V
Rated insulation voltage690 V a.c.
Protection classII
Rated current of clamp75 A
Maximum device rated current63 A
Number of division units54 TE
Number of rows3
Conduit spacing150 mm
Cable glandElastic sealing membranes, metric pre-threads M20
Sealing range7 mm - 29 mm
Cable entry positiontop and bottom
MaterialPolystyrene
Filament test750 °C
UL 94V-2
Temperature resistance-25 to +80 °C
Nominal power50 W
Temperature difference30 K
Number of terminals per pole32 push-in terminals, 8 screw terminals
Conductor cross-section plug terminal1.5 to 4 mm²
Conductor cross-section screw terminal1.5 to 25 mm²
Conductor typeSolid, fine-stranded, stranded
Conductor materialCopper
Compliance with standardsDIN EN 60670-1, DIN EN 60670-24
Halogen freeYes
Silicone-freeYes


Product data sheet
Datasheet for Gustav Hensel 6100230, EAN: 4012591622307

Questions & answers

What is the delivery time of Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54?

The article Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54 is currently in stock

According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Gustav Hensel 6100230 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54 always at the best possible price. We can give you a discount of 2% on Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54 if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Fitting accessory for Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54

Gustav Hensel 3600181 Hensel ESM 20 insert bushing IP55 M20 grey for pre-punching M20 Gustav Hensel LogoGustav Hensel 3600181 Hensel ESM 20 insert bushing IP55 M20 grey for pre-punching M20 The Gustav Hensel ESM 20 is an insert bushing, specifically designed for use in surface-mounted junction boxes with pre-punched M 20 fittings. It serves as a mechanical and electrical connection ...

Lieske Part No.: 184518
Mfg Part No: 3600181
Type: ESM 20
7,79 EUR
Gustav Hensel 3600181 plus VAT
≈ £6.52  |  ≈ $8.56
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
Gustav Hensel 6100025 Hensel KV ES1 mounting lock for KV switchgear enclosure 12-54TE Gustav Hensel LogoGustav Hensel 6100025 Hensel KV ES1 mounting lock for KV switchgear enclosure 12-54TE Built-in lock
With profile cylinder, for closing the breaker box. For small distribution division of 12-54 units.

Type: KVES1
Quantity: 1 unit.

Lieske Part No.: 456060
Mfg Part No: 6100025
Type: KV ES 1
32,58 EUR
Gustav Hensel 6100025 plus VAT
≈ £27.27  |  ≈ $35.81
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
Gustav Hensel 3600210 Hensel AKM 20 mounting cable gland IP67 glow wire test IEC 960°C Gustav Hensel LogoGustav Hensel 3600210 Hensel AKM 20 mounting cable gland IP67 glow wire test IEC 960°C Metric cable glands with strain relief and locknut protection IP 65 75 ° C glow wire test execution: M 2, 6,5 -
3,5 mm Type: AKM2 item:
ST.

Lieske Part No.: 530399
Mfg Part No: 3600210
Type: AKM 20
3,75 EUR 3,76 EUR
Gustav Hensel 3600210 plus VAT
≈ £3.14  |  ≈ $4.12
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
Gustav Hensel 3600173 Hensel STM 20 step bushing IP55 M20 for pre-punching M20 sealing area D=5-16 mm Gustav Hensel LogoGustav Hensel 3600173 Hensel STM 20 step bushing IP55 M20 for pre-punching M20 sealing area D=5-16 mm Levels spigots metric
Degree of protection IP 55

Model: M 20, 5-16 mm Type: STM20


Quantity: 1 unit.

Lieske Part No.: 613851
Mfg Part No: 3600173
Type: STM 20
7,79 EUR
Gustav Hensel 3600173 plus VAT
≈ £6.52  |  ≈ $8.56
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Gustav Hensel KV 3554 Distribution Enclosure IP54
Gustav Hensel 6100230 Hensel KV 3554 KV90 device housing 54TE (3x18x18 mm) IP54
248,61 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Gustav Hensel KV 3554 Distribution Enclosure IP54
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.