Gustav Hensel 2000354 Hensel Mi ZE 62 strain relief clamp 2x max. 60 mm in combination with flange Mi FP82
|
65,45 EUR |
|
|
( 77,89 EUR incl. VAT ) ≈ £54.78 | ≈ $71.93 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |
| In Stock: >10 pieces | |
| Datasheet: | file_download Download |
|---|---|
| Lieske Part No.: | 202450 |
| Mfg Part No: | 2000354 |
| UPC/EAN: | 4012591653547 |
| Weight: | 0.7 kg |
| Type: | Mi ZE 62 |
Product information for Gustav Hensel 2000354:
Applications
The cable strain relief clamp is intended for protected installations, i.e., for indoor use or protected outdoor areas where environmental conditions do not compromise operational safety. It is not intended for open, unprotected outdoor installations where direct weather influences such as rain, sunlight, or high humidity occur over extended periods. The operating conditions include an ambient temperature range of -5 °C to +40 °C, with the maximum temperature over 24 hours not exceeding 35 °C. The relative humidity may be up to 50 % at 40 °C, and up to 100 % at 25 °C.
Functions and Equipment in Detail
The clamp is made of steel, a robust and durable material suitable for mechanical loads in electrical distributors. It is supplied with fastening material intended for mounting on the corresponding enclosures. The width of the clamp is 284 mm, enabling adaptation to standardised Mi enclosures. The net weight of 0.612 kg indicates the material thickness and construction, ensuring stable mounting.
Technology Explained Simply
The cable strain relief clamp provides mechanical relief for cables by absorbing and distributing tensile forces acting on the cable at the connection point to the enclosure. This prevents tearing or damage to the cable insulation and avoids failure of the electrical connection. The clamp is designed for two cables, each with a maximum diameter of 60 mm. The construction enables secure and durable fastening, meeting the requirements of standard DIN EN IEC 61439-2, which applies to low-voltage switchgear and controlgear assemblies in enclosure form.
Compatibility and Accessories
The cable strain relief clamp Mi ZE 62 is specifically developed for use with Mi enclosures from Gustav Hensel. It is used in conjunction with the mounting flange Mi FP 82 to ensure secure and standardised mounting on distributors. The combination of flange and strain relief clamp enables structured and orderly cable routing, meeting requirements for safety and maintainability in electrical installations.
Installation and Mounting
Mounting is carried out using the supplied fastening material at the designated mounting points on the Mi enclosure. The clamp is positioned to ensure secure cable routing and protection against tensile forces. Installation is tool-operated and performed via quick-release fasteners, enabling secure and rapid attachment.
Operational Advantages
The use of the cable strain relief clamp Mi ZE 62 increases the reliability of cable connections in electrical distributors. Mechanical relief extends cable lifespan and reduces the risk of faults or failures due to mechanical stress. The clamp is easy to install and fits standard dimensions of Mi enclosures, simplifying planning and installation. Conformity with DIN EN IEC 61439-2 ensures the clamp meets safety and quality requirements in electrical engineering.
| General | |
| Degree of protection | protected installation |
| Maximum ambient temperature 24 h | 35 °C |
| Ambient temperature | -5 to +40 °C |
| Relative humidity | ≤ 50 % at 40 °C, ≤ 100 % at 25 °C |
| Material | Steel |
| Compliance with standards | DIN EN IEC 61439-2 |
| Maximum cable count | 2 |
| Max. cable Ø | 60 mm |
| Scope of delivery | Fastening material |
Questions & answers
What is the delivery time of Gustav Hensel 2000354 Hensel Mi ZE 62 strain relief clamp 2x max. 60 mm in combination with flange Mi FP82?
The article Gustav Hensel 2000354 Hensel Mi ZE 62 strain relief clamp 2x max. 60 mm in combination with flange Mi FP82 is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Gustav Hensel 2000354 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Gustav Hensel 2000354 Hensel Mi ZE 62 strain relief clamp 2x max. 60 mm in combination with flange Mi FP82 always at the best possible price. We can give you a discount of 2% on Gustav Hensel 2000354 Hensel Mi ZE 62 strain relief clamp 2x max. 60 mm in combination with flange Mi FP82 if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Gustav Hensel 20001390 Hensel Mi 6480 Mi-NH fuse switch disconnector housing 1xNH 1 250A 5-pole
The housing of type Mi 6480 from Gustav Hensel is a fuse switch disconnector housing for use in energy switching device combinations up to 630 A or as a single housing. It is made of high-quality ...Lieske Part No.: 147772 Mfg Part No: 20001390 Type: Mi 6480 |
1.046,90 EUR
![]() ≈ £876.26 | ≈ $1,150.54
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000012 Hensel Mi 0401 empty enclosure 275x575x146 mm with transparent cover
The empty enclosure Mi 0401 from Gustav Hensel is an ISO distribution enclosure designed for use in humid environments and protected installations. It serves as a base for mounting energy switching ...Lieske Part No.: 150512 Mfg Part No: 2000012 Type: Mi 0401 |
305,80 EUR 307,89 EUR
![]() ≈ £255.95 | ≈ $336.07
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000003 Hensel Mi 0300 empty enclosure 275x425x146 mm transparent cover
The empty enclosure Mi 0300 from Gustav Hensel is an ISO distribution enclosure for use in wet rooms and protected installations. It serves as a base for mounting power switching device combinations ...Lieske Part No.: 163539 Mfg Part No: 2000003 Type: Mi 0300 |
256,31 EUR 258,09 EUR
![]() ≈ £214.53 | ≈ $281.68
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 3900222 Hensel K1205 cable junction box 16–150 mm² 3ph. 5-pole terminal
The cable junction box K 1205 from Gustav Hensel is a robust, surface-mounted connection element for electrical wiring in buildings as well as for protected outdoor applications. It is made of ...Lieske Part No.: 279628 Mfg Part No: 3900222 Type: K 1205 |
639,35 EUR 645,48 EUR
![]() ≈ £535.14 | ≈ $702.65
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Gustav Hensel 2000005 Hensel Mi 0400 empty enclosure 275x575x146 mm transparent cover
Wed EnclosuresIP 54 with insertion stubs, IP 65 with connection pieces, to accommodate devices with support rails or mounting plates, Thermoplastic, gray RAL 7032, with lid fasteners for tool ... Lieske Part No.: 306186 Mfg Part No: 2000005 Type: Mi 0400 |
305,80 EUR 307,89 EUR
![]() ≈ £255.95 | ≈ $336.07
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000008 Hensel Mi 0201 empty housing 275x275x146 mm with transparent cover
Wed EnclosuresIP 54 with insertion stubs, IP 65 with connection pieces, to accommodate devices with support rails or mounting plates, Thermoplastic, gray RAL 7032, with lid fasteners for tool ... Lieske Part No.: 455822 Mfg Part No: 2000008 Type: Mi 0201 |
163,31 EUR 164,44 EUR
![]() ≈ £136.69 | ≈ $179.48
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000006 Hensel Mi 0800 empty enclosure 575x575x146 mm transparent cover
Mi empty housing IP 54 with insertion stubs, IP 65 with connection pieces, to accommodate devices with support rails or mounting plates, Thermoplastic, gray RAL 7 32, cover with fasteners for tool ...Lieske Part No.: 533735 Mfg Part No: 2000006 Type: Mi 0800 |
532,00 EUR 535,59 EUR
![]() ≈ £445.28 | ≈ $584.67
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000001 Hensel Mi 0200 empty enclosure 275x275x146 mm transparent cover
The housing from manufacturer Gustav Hensel, type Mi 0200, is an empty housing for use in energy switching device combinations up to 630 A or as a standalone individual housing in humid environment ...Lieske Part No.: 669097 Mfg Part No: 2000001 Type: Mi 0200 |
163,31 EUR 164,44 EUR
![]() ≈ £136.69 | ≈ $179.48
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000007 Hensel Mi 0101 empty housing 275x125x146 mm with transparent cover
The housing from manufacturer Gustav Hensel, type Mi 0101, is an empty housing made of high-quality polycarbonate, designed for use in damp environments. It serves as a base for mounting energy ...Lieske Part No.: 698286 Mfg Part No: 2000007 Type: Mi 0101 |
132,53 EUR 133,45 EUR
![]() ≈ £110.93 | ≈ $145.65
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Gustav Hensel 2000000 Hensel Mi 0100 empty enclosure 275x125x146 mm transparent cover
The housing of type Mi 0100 from Gustav Hensel is an empty housing for use in energy switching device combinations up to 630 A or as a single housing in electrical distributions. It serves as a ...Lieske Part No.: 800963 Mfg Part No: 2000000 Type: Mi 0100 |
132,53 EUR 133,45 EUR
![]() ≈ £110.93 | ≈ $145.65
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|














