Gustav Hensel 2000354, EAN: 4012591653547

Gustav Hensel Mi ZE 62 Cable Tension Relief 2x60mm

Installation > Distributor Cabinets > ISO - Distributor / housing, moisture

Gustav Hensel Mi ZE 62 Cable Tension Relief 2x60mm

Lieske Part No. 202450
Mfg Part No 2000354
EAN-Code 4012591653547
Manufacturer Gustav Hensel
Here only 65,45 EUR
77,89 EUR incl. VAT

Further information for Gustav Hensel Mi ZE 62 Cable Tension Relief 2x60mm

General
Degree of protectionprotected installation
Maximum ambient temperature 24 h35 °C
Ambient temperature-5 to +40 °C
Relative humidity≤ 50 % at 40 °C, ≤ 100 % at 25 °C
MaterialSteel
Compliance with standardsDIN EN IEC 61439-2
Maximum cable count2
Max. cable Ø60 mm
Scope of deliveryFastening material
The cable strain relief clamp Mi ZE 62 from Gustav Hensel is a mechanical component for the secure fastening and routing of cables on Mi enclosures. It is specifically designed for use in distribution and meter enclosures, particularly in combination with the mounting flange Mi FP 82. The clamp allows the routing of two cables with a maximum outer diameter of 60 mm and serves to relieve the cables from tensile forces that occur during installation, removal, or mechanical stress. This ensures the integrity of cable connections and the longevity of the installation.

Applications
The cable strain relief clamp is intended for protected installations, i.e., for indoor use or protected outdoor areas where environmental conditions do not compromise operational safety. It is not intended for open, unprotected outdoor installations where direct weather influences such as rain, sunlight, or high humidity occur over extended periods. The operating conditions include an ambient temperature range of -5 °C to +40 °C, with the maximum temperature over 24 hours not exceeding 35 °C. The relative humidity may be up to 50 % at 40 °C, and up to 100 % at 25 °C.

Functions and Equipment in Detail
The clamp is made of steel, a robust and durable material suitable for mechanical loads in electrical distributors. It is supplied with fastening material intended for mounting on the corresponding enclosures. The width of the clamp is 284 mm, enabling adaptation to standardised Mi enclosures. The net weight of 0.612 kg indicates the material thickness and construction, ensuring stable mounting.

Technology Explained Simply
The cable strain relief clamp provides mechanical relief for cables by absorbing and distributing tensile forces acting on the cable at the connection point to the enclosure. This prevents tearing or damage to the cable insulation and avoids failure of the electrical connection. The clamp is designed for two cables, each with a maximum diameter of 60 mm. The construction enables secure and durable fastening, meeting the requirements of standard DIN EN IEC 61439-2, which applies to low-voltage switchgear and controlgear assemblies in enclosure form.

Compatibility and Accessories
The cable strain relief clamp Mi ZE 62 is specifically developed for use with Mi enclosures from Gustav Hensel. It is used in conjunction with the mounting flange Mi FP 82 to ensure secure and standardised mounting on distributors. The combination of flange and strain relief clamp enables structured and orderly cable routing, meeting requirements for safety and maintainability in electrical installations.

Installation and Mounting
Mounting is carried out using the supplied fastening material at the designated mounting points on the Mi enclosure. The clamp is positioned to ensure secure cable routing and protection against tensile forces. Installation is tool-operated and performed via quick-release fasteners, enabling secure and rapid attachment.

Operational Advantages
The use of the cable strain relief clamp Mi ZE 62 increases the reliability of cable connections in electrical distributors. Mechanical relief extends cable lifespan and reduces the risk of faults or failures due to mechanical stress. The clamp is easy to install and fits standard dimensions of Mi enclosures, simplifying planning and installation. Conformity with DIN EN IEC 61439-2 ensures the clamp meets safety and quality requirements in electrical engineering.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/202450
qrcode für Gustav Hensel Mi ZE 62 Cable Tension Relief 2x60mm