Gira 126967 door station video AP 1-way door communication anthracite content_copy

AP 1X Tuerstation video door communication system anthracite Tuerstation with color camera, Tuerlautsprecher and 1-gang call button as a completely assembled unit for the vertical surface mounting. The video Tuerstation AP has the following product features: - Completely pre-assembled wall Tuerstation in TX_44 design allows quick and clean installation. - Signaluebertragung and supply of the participants about the reverse polarity protected and short-circuit-proof 2-wire bus. - Rigid Aufputzgehaeuse by aluminum profile. - Cover made of shatterproof thermoplastic with high UV stability and a scratch-resistant, easy-care surface included. - Theft protection with Torx screws. - A one-man operation with easy startup procedure. - Weather-proof speakers. - High-quality electret microphone. - Speakerphone (voice controlled talk-back with echo and background Geraeuschunterdrueckung). - Acoustic acknowledgment signal at Ruftastenbetaetigung. - Sprachlautstaerke adjustable. - White call button illumination in LED technology. - Splash-proof call button cover made of impact resistant plastic. - Name plate of the call button without tools and without frame removal. - Professional lettering over the Gira inscription service www.beschriftung.gira.de or the Gira inscription software. The color camera has the following features: - Automatic Camera Night Switch: The camera switches from a defined ambient brightness of day mode (color display) to night mode (black and white representation) and vice versa. Due to the high sensitivity at night mode, good presentation results are achieved even in poor light conditions. - LEDs provide in night mode for a gleichmaessige field illumination at close range. - Camera horizontally and vertically by 20 retractable system. In combination with the wide angle lens, this results in a very large viewing angle. - Automatic backlight compensation. - Automatic White Balance. - Automatic Verstaerkungsregelung (AGC). - Built-in camera with heater temperature detection. - Splash-proof cover. - Camera cover made of impact resistant plastic, at any scratching, eg vandalism, easily replaceable. Power supply: 26 V DC 2 V (bus) connections: 2 screw terminals for 2-wire bus connections: 2 screw terminals for additional supply Dimensions: W x H x D 110 x 253 x 19 mm (without camera) Dimensions: W x H x D 110 x 253 x 40 mm (with camera) Name plate dimensions: W x H 62 x 62 mm Image Sensor: CCD sensor 0.85 cm (1/3) Wide-angle lens: 150 opening angle Visible detection range: angle of the camera 100 Detectable range (at 20 tilt) : 140 Color System: PAL Picture Elements: 500 (H) x 582 (V) Horizontal Resolution: 380 TV lines Switching threshold color to SW: 1 lux light sensitivity in B-mode: 0.1 lux Electronic shutter Shutter speed: up to 1 / 100000 s IR filter: integrated Recommended camera height: 1.50 m Temperature range: -20 C to +50 C Protection: IP 44

Type: 126967
Quantity: 1 unit.

General
Installation technique	Bus system
Mounting method	Surface mounted (plaster)
Colour	Anthracite
Degree of protection (IP)	IP44
Number of bell buttons	1
Opening angle camera	100 °
Operation mode	Push button
Modular construction
With info label
With cover
Protection against vandalism
With camera
IFTTT support available
Manual adjustable camera

---