Products of Ggk
Categories with products from Ggk
- Electrics ➤ Installation ➤ Wiring systems ➤ Wiring ducts ( 20 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Ceiling lights ( 1 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Miscellaneous ( 1 )
 |
Ggk LFS-FW60x60 2333Ggk 2333 LFS-FW 60x60 alpine white low angle, f.Leitungsführungskanal Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction. Lieske Part No.: 294498 Mfg Part No: 2333 Type: LFS-FW60x60 |
57,27 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/FBS-FW60x100 2334Ggk 2334 LFS / FBS-low angle LFS / FLW60X100VZ, 60x100mm galvanized Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction. Lieske Part No.: 330776 Mfg Part No: 2334 Type: LFS/FBS-FW60x100 |
55,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/FLW60X100RW 2335Ggk 2335 LFS / FBS low angle LFS/FLW60X100RW, 60x100mm coated pure white Flat angle as hood molding for cable routing duct, for cable laying with a 90° change of direction. Lieske Part No.: 995652 Mfg Part No: 2335 Type: LFS/FLW60X100RW |
63,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/EST40X60VZ 2340Ggk 2340 endplate LFS / EST40X60VZ, 40x60mm galvanized End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 801457 Mfg Part No: 2340 Type: LFS/EST40X60VZ |
12,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/EST40X60RW 2341GGK-PLATE LFS LFS / EST40X60RW, 40x60mm COATED PURE WHITE End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 402146 Mfg Part No: 2341 Type: LFS/EST40X60RW |
16,42 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/EST60X60VZ 2342Ggk 2342 LFS-end plate LFS / EST60X60VZ, 60x60mm galvanized End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 127606 Mfg Part No: 2342 Type: LFS/EST60X60VZ |
12,76 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS-ES60x60 2343Pure white GGK LFS endplate LFS / EST60X60RW, 60x60mm coated End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 812701 Mfg Part No: 2343 Type: LFS-ES60x60 |
16,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/EST60X100VZ 2344Ggk 2344 endplate LFS / EST60x100VZ, 60x100mm galvanized End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 139368 Mfg Part No: 2344 Type: LFS/EST60X100VZ |
13,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS/FBS-ES60x100 2345Ggk 2345 LFS / FBS ES 60x100 alpine white, tail f.Leitungsführungskanal End piece as a molded part for cable routing ducts, for covering open ends of the cable routing ducts, is held by clamping to the cable routing duct. Lieske Part No.: 960656 Mfg Part No: 2345 Type: LFS/FBS-ES60x100 |
17,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFG-T30x30cremewei 2395GGK 2395 T-piece for LFG 30x30 cream white RAL9001 T-piece as hood molding for cable duct, for cable laying with a 90° branch. Lieske Part No.: 1324546 Mfg Part No: 2395 Type: LFG-T30x30cremewei |
8,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-UT120x120Pult/S 24003Ggk 24003 device installation trunking, BRS3-UT 120x120 desk / S (symmetric) Parapet duct lower part made of sheet steel in accordance with DIN EN 50085-2-1 for laying cables directly on the wall or on wall brackets, for an internal 80 mm upper part for installing devices from ... Lieske Part No.: 551908 Mfg Part No: 24003 Type: BRS3-UT120x120Pult/S |
104,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-UT120x120Pult/S 24005Ggk 24005 BRS3-UT 120x120 desk / S, symmetrically galvanized channel Parapet duct lower part made of sheet steel in accordance with DIN EN 50085-2-1 for laying cables directly on the wall or on wall brackets, for an internal 80 mm upper part for installing devices from ... Lieske Part No.: 949969 Mfg Part No: 24005 Type: BRS3-UT120x120Pult/S |
57,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-IE120x120Pult/S 24006Ggk 24006 BRS3-IE 120x120 desk / S symmetrical, hood molding alpine white Internal corner as cut-concealing hood molding for parapet duct made of sheet steel, for corner bypassing in rooms, with pre-assembled upper part sections for plugging into the lower part profiles. Lieske Part No.: 876633 Mfg Part No: 24006 Type: BRS3-IE120x120Pult/S |
163,39 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-IE120x120Pult/Sverzinkt 24008GGK 24008 Inner corner IE for BRS 120x120 Desk/S symmetrically galvanized Internal corner as cut-concealing hood molding for parapet duct made of sheet steel, for corner bypassing in rooms, with pre-assembled upper part sections for plugging into the lower part profiles. Lieske Part No.: 1330352 Mfg Part No: 24008 Type: BRS3-IE120x120Pult/Sverzinkt |
86,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-AE120x120 24009Ggk 24009 Outer corner for wall duct, BRS3-AE 120x120 desk / S (symmetrical) Outside corner as cut-concealing hood molding for parapet duct made of sheet steel, for laying cables around wall projections, with pre-assembled upper part sections for plugging into the lower part ... Lieske Part No.: 163323 Mfg Part No: 24009 Type: BRS3-AE120x120 |
163,39 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-AE120x120verzinkt 24011Ggk 24011 Außeneck AE f.BRS 120x120 Pult/S symmetrisch verzinkt Außeneck als schnittkaschierendes Haubenformteil zu Brüstungskanal aus Stahlblech, zur Leitungsverlegung um Mauervorsprünge, mit vormontierten Oberteil-Abschnitten zum Aufstecken in die ... Lieske Part No.: 507504 Mfg Part No: 24011 Type: BRS3-AE120x120verzinkt |
86,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-ESre/li120x120P 24012Ggk 24012 Tail for wall duct, BRS3-ES re / li 120x120 desk / S End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 455794 Mfg Part No: 24012 Type: BRS3-ESre/li120x120P |
34,43 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk BRS3-ESre/li120x120P 24014Ggk 24014 Tail for wall duct, BRS3-ES re / li 120x120 desk / S End piece as a molded part for parapet duct made of sheet steel, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 401557 Mfg Part No: 24014 Type: BRS3-ESre/li120x120P |
29,23 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 24187 24187GGK 24187 Equipment carrier GT for SL-Box 70/45 empty GT for SL 20x70 Alpine white RAL9010 Device carrier for the skirting board duct SL 20x70, for the installation of a compact M45 built-in device in the format 45x45 mm, device carrier lower part with four fastening points for screwing ... Lieske Part No.: 1334761 Mfg Part No: 24187 |
22,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk SL-Box50/45alpinweiß 24188GGK 24188 Equipment carrier GT for SL-Box 50/45 empty GT for SL 20x50 Alpine white RAL9010 Device carrier for the skirting board duct SL 20x50, for the installation of a compact M45 built-in device in the format 45x45 mm, device carrier lower part with four fastening points for screwing ... Lieske Part No.: 1326112 Mfg Part No: 24188 Type: SL-Box50/45alpinweiß |
22,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk MINI/S15X30RW 24605Ggk 24605 MINI / s 15x30 Set Leitungsführungska., Alpine white Cable routing duct made of sheet steel in accordance with DIN EN 50085-2-1 for laying cables on walls and ceilings, consisting of a completely overlapping upper section and lower section with ... Lieske Part No.: 923414 Mfg Part No: 24605 Type: MINI/S15X30RW |
-24% 19,30 EUR 25,30 EUR
plus delivery charges
in stockinfo_outline
|
 |
Ggk MINI/S30X30RW 24610Ggk 24610 installation channel MINI / S30X30RW, 30x30mm coated pure white Cable routing duct made of sheet steel in accordance with DIN EN 50085-2-1 for laying cables on walls and ceilings, consisting of a completely overlapping upper section and lower section with ... Lieske Part No.: 505707 Mfg Part No: 24610 Type: MINI/S30X30RW |
69,85 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk LFS40X40VZ 2742Ggk 2742 LFS installation channel 40x40 mm, galvanized LFS40X40VZ Cable routing duct made of sheet steel in accordance with DIN EN 50085-2-1 for laying cables on walls and ceilings, consisting of a completely overlapping upper section and lower section. (Lower ... Lieske Part No.: 802437 Mfg Part No: 2742 Type: LFS40X40VZ |
44,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Ggk LFS 40x40-IE 2743Ggk 2743 Inneneckhaube LFS 40x40, Stahl, verzinkt Inneneck als Haubenformteil zu Leitungsführungskanal, zur Eckumfahrung in Räumen. Verkaufseinheit: 1 ST. Lieske Part No.: 491177 Mfg Part No: 2743 Type: LFS 40x40-IE |
37,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|