GABO 3525
sp-i 10x2.0 speed.pipe® Indoor 2500m
|
2.932,50 EUR 3.060,00 EUR |
|
|
( 3.489,67 EUR incl. VAT ) ≈ £2,519.02 | ≈ $3,360.64 plus delivery charges: 53,00 € |
|
| Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline | |
| Sales unit: 2500 meters | |
| Lieske Part No.: | 1593255 |
|---|---|
| Mfg Part No: | 3525 |
| Weight: | 0.123 kg |
Further Halogen-free plastic tubes from GABOFurther products in category Halogen-free plastic tubes
All products of GABO
Product information for GABO 3525:
The speedpipe indoor were developed by gabocom specifically for use in buildings.
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3525
The item price shown refers to 2500 meters GABO 3525
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3525
The item price shown refers to 2500 meters GABO 3525
Please note...
This article has over-weight and though needs to be transported by a forwarding agency. Please mind, that the calculation of the delivery charges in the shopping cart disregard this aspect.
Though, there will be corresponding surcharges after you send us your order.
Questions & answers
What is the delivery time of GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m?
The article GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 9 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of GABO 3525 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m always at the best possible price. We can give you a discount of 2% on GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m is offered by us in a sales unit of 2500 meters If you need a larger quantity, you can contact us at any time. We will make a special offer for you
This product is recommended as accessory for
 |
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
 ≈ £56.16 | ≈ $74.93
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1969 SK 10 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593326 Mfg Part No: 1969 |
10,79 EUR 11,26 EUR
≈ £9.27 | ≈ $12.37
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1325 EZA-t 10/1.8-3.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 10 mm for cables ... Lieske Part No.: 1593377 Mfg Part No: 1325 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1327 EZA-t 10/5.0-6.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoors with a diameter of 10 mm for cables ... Lieske Part No.: 1593390 Mfg Part No: 1327 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1326 EZA-t 10/3.0-5.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible individual cable seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 10 mm for ... Lieske Part No.: 1593403 Mfg Part No: 1326 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1749 EBM 10 indoor blow-in sockets
The flame-retardant and halogen-free EBM indoor blow-in sleeves are used to connect occupied indoor speedpipes with a diameter of 10 mm to 0.5 bar in a gas-tight and water-tight manner. The divisible ... Lieske Part No.: 1593538 Mfg Part No: 1749 |
275,03 EUR 286,99 EUR
≈ £236.25 | ≈ $315.18
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1343 EBM-GS 14/5.0-6.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593835 Mfg Part No: 1343 |
333,68 EUR 348,19 EUR
≈ £286.63 | ≈ $382.40
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1338 EBM-GS 10/5.0-6.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593840 Mfg Part No: 1338 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1337 EBM-GS 10/3.0-5.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593841 Mfg Part No: 1337 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1336 EBM-GS 10/1.8-3.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593842 Mfg Part No: 1336 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 2018 KmR 10 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 10 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593845 Mfg Part No: 2018 |
167,44 EUR 174,72 EUR
≈ £143.83 | ≈ $191.89
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1695 ES 10 indoor end plugs
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and water-tight with 10 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598270 Mfg Part No: 1695 |
163,88 EUR 171,00 EUR
≈ £140.77 | ≈ $187.81
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1221 DSM 10 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 10 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1598276 Mfg Part No: 1221 |
4,92 EUR 5,14 EUR
≈ £4.23 | ≈ $5.64
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
Fitting accessory for GABO 3525 sp-i 10x2.0 speed.pipe® Indoor 2500m
|
|
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
≈ £56.16 | ≈ $74.93
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1969 SK 10 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593326 Mfg Part No: 1969 |
10,79 EUR 11,26 EUR
≈ £9.27 | ≈ $12.37
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1325 EZA-t 10/1.8-3.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 10 mm for cables ... Lieske Part No.: 1593377 Mfg Part No: 1325 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1327 EZA-t 10/5.0-6.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoors with a diameter of 10 mm for cables ... Lieske Part No.: 1593390 Mfg Part No: 1327 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1326 EZA-t 10/3.0-5.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible individual cable seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 10 mm for ... Lieske Part No.: 1593403 Mfg Part No: 1326 |
234,60 EUR 244,80 EUR
≈ £201.52 | ≈ $268.85
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1749 EBM 10 indoor blow-in sockets
The flame-retardant and halogen-free EBM indoor blow-in sleeves are used to connect occupied indoor speedpipes with a diameter of 10 mm to 0.5 bar in a gas-tight and water-tight manner. The divisible ... Lieske Part No.: 1593538 Mfg Part No: 1749 |
275,03 EUR 286,99 EUR
≈ £236.25 | ≈ $315.18
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1338 EBM-GS 10/5.0-6.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593840 Mfg Part No: 1338 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1337 EBM-GS 10/3.0-5.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593841 Mfg Part No: 1337 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1336 EBM-GS 10/1.8-3.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593842 Mfg Part No: 1336 |
328,30 EUR 342,58 EUR
≈ £282.01 | ≈ $376.23
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 2018 KmR 10 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 10 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593845 Mfg Part No: 2018 |
167,44 EUR 174,72 EUR
≈ £143.83 | ≈ $191.89
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1695 ES 10 indoor end plugs
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and water-tight with 10 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598270 Mfg Part No: 1695 |
163,88 EUR 171,00 EUR
≈ £140.77 | ≈ $187.81
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1221 DSM 10 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 10 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1598276 Mfg Part No: 1221 |
4,92 EUR 5,14 EUR
≈ £4.23 | ≈ $5.64
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|