GABO 3507
sp-i 12x2.0 speed.pipe® Indoor 2000m
|
3.059,00 EUR 3.192,00 EUR |
|
|
( 3.640,21 EUR incl. VAT ) ≈ £2,627.68 | ≈ $3,505.61 plus delivery charges: 53,00 € |
|
| Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline | |
| Sales unit: 2000 meters | |
| Lieske Part No.: | 1593883 |
|---|---|
| Mfg Part No: | 3507 |
| Weight: | 0.123 kg |
Further Halogen-free plastic tubes from GABOFurther products in category Halogen-free plastic tubes
All products of GABO
Product information for GABO 3507:
The speedpipe indoor were developed by gabocom specifically for use in buildings.
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3507
The item price shown refers to 2000 meters GABO 3507
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3507
The item price shown refers to 2000 meters GABO 3507
Please note...
This article has over-weight and though needs to be transported by a forwarding agency. Please mind, that the calculation of the delivery charges in the shopping cart disregard this aspect.
Though, there will be corresponding surcharges after you send us your order.
Questions & answers
What is the delivery time of GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m?
The article GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 9 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of GABO 3507 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m always at the best possible price. We can give you a discount of 2% on GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m is offered by us in a sales unit of 2000 meters If you need a larger quantity, you can contact us at any time. We will make a special offer for you
This product is recommended as accessory for
 |
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
 ≈ £56.16 | ≈ $74.93
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1970 SK 12 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593325 Mfg Part No: 1970 |
11,99 EUR 12,52 EUR
≈ £10.30 | ≈ $13.74
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1328 EZA-t 12/3.0-5.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 12 mm for cables ... Lieske Part No.: 1593530 Mfg Part No: 1328 |
238,28 EUR 248,64 EUR
≈ £204.68 | ≈ $273.07
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1750 EBM 12 indoor blow-in sockets
The flame-retardant and halogen-free EBM indoor blow-in sleeves are used to connect occupied indoor speedpipes with a diameter of 12 mm to 0.5 bar in a gas-tight and water-tight manner. The divisible ... Lieske Part No.: 1593537 Mfg Part No: 1750 |
277,24 EUR 289,30 EUR
≈ £238.15 | ≈ $317.72
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1329 EZA-t 12/5.0-6.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 12 mm for cables ... Lieske Part No.: 1593543 Mfg Part No: 1329 |
238,28 EUR 248,64 EUR
≈ £204.68 | ≈ $273.07
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1341 EBM-GS 12/5.0-6.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593837 Mfg Part No: 1341 |
331,61 EUR 346,03 EUR
≈ £284.85 | ≈ $380.03
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1339 EBM-GS 12/3.0-5.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593838 Mfg Part No: 1339 |
331,61 EUR 346,03 EUR
≈ £284.85 | ≈ $380.03
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 2019 KmR 12 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 12 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593985 Mfg Part No: 2019 |
167,44 EUR 174,72 EUR
≈ £143.83 | ≈ $191.89
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1696 ES 12 indoor end plugs
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and watertight with 12 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598269 Mfg Part No: 1696 |
113,28 EUR 118,20 EUR
≈ £97.31 | ≈ $129.82
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
 |
GABO 1222 DSM 12 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 12 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1598275 Mfg Part No: 1222 |
155,54 EUR 162,30 EUR
≈ £133.61 | ≈ $178.25
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
Fitting accessory for GABO 3507 sp-i 12x2.0 speed.pipe® Indoor 2000m
|
|
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
≈ £56.16 | ≈ $74.93
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1970 SK 12 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593325 Mfg Part No: 1970 |
11,99 EUR 12,52 EUR
≈ £10.30 | ≈ $13.74
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1328 EZA-t 12/3.0-5.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 12 mm for cables ... Lieske Part No.: 1593530 Mfg Part No: 1328 |
238,28 EUR 248,64 EUR
≈ £204.68 | ≈ $273.07
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1750 EBM 12 indoor blow-in sockets
The flame-retardant and halogen-free EBM indoor blow-in sleeves are used to connect occupied indoor speedpipes with a diameter of 12 mm to 0.5 bar in a gas-tight and water-tight manner. The divisible ... Lieske Part No.: 1593537 Mfg Part No: 1750 |
277,24 EUR 289,30 EUR
≈ £238.15 | ≈ $317.72
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1329 EZA-t 12/5.0-6.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 12 mm for cables ... Lieske Part No.: 1593543 Mfg Part No: 1329 |
238,28 EUR 248,64 EUR
≈ £204.68 | ≈ $273.07
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1341 EBM-GS 12/5.0-6.5 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593837 Mfg Part No: 1341 |
331,61 EUR 346,03 EUR
≈ £284.85 | ≈ $380.03
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1339 EBM-GS 12/3.0-5.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593838 Mfg Part No: 1339 |
331,61 EUR 346,03 EUR
≈ £284.85 | ≈ $380.03
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 2019 KmR 12 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 12 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593985 Mfg Part No: 2019 |
167,44 EUR 174,72 EUR
≈ £143.83 | ≈ $191.89
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1696 ES 12 indoor end plugs
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and watertight with 12 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598269 Mfg Part No: 1696 |
113,28 EUR 118,20 EUR
≈ £97.31 | ≈ $129.82
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
|
GABO 1222 DSM 12 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 12 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1598275 Mfg Part No: 1222 |
155,54 EUR 162,30 EUR
≈ £133.61 | ≈ $178.25
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|