GABO 3503
sp-i 7x1.5 speed.pipe® Indoor 1250m
|
991,88 EUR 1.035,00 EUR |
|
|
( 1.180,34 EUR incl. VAT ) ≈ £853.02 | ≈ $1,130.74 plus delivery charges: 53,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Sales unit: 1250 meters | |
| Lieske Part No.: | 1593259 |
|---|---|
| Mfg Part No: | 3503 |
| Weight: | 0.123 kg |
Product information for GABO 3503:
The speedpipe indoor were developed by gabocom specifically for use in buildings.
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3503
The item price shown refers to 1250 meters GABO 3503
According to the EU Low Voltage Directive 2014¿/¿35¿/¿EU, the speedpipe indoor system is fully tested in accordance with EN 61386-22, e.g. fire tests in accordance with legal safety objectives, installation and laying regulations, compatibility with fire barriers.
The speedpipe indoor are flame-retardant and have been tested according to the standards EN 60684-2 for halogen-free status and according to EN 61034-2 for low smoke levels.
For use in canals or tunnels, the speedpipe indoor version with increased wall thickness also offers increased mechanical strength.
Both variants are equipped with optimized sliding ribs on the inside and are therefore ideal for blowing in bundled fibers, micro and mini cables.
The speedpipe indoor are delivered on a disposable wooden spool or plastic spool (cardboard) that is optimized for transport and installation.
Type: 3503
The item price shown refers to 1250 meters GABO 3503
Please note...
This article has over-size and needs to be seperately taken care of. This is why we want to inform you, that the calculation of the delivery charges in the shopping cart will disregard this aspect. Though, there will be corresponding surcharges after you send us your order.
Questions & answers
What is the delivery time of GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m?
The article GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of GABO 3503 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m always at the best possible price. We can give you a discount of 2% on GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m is offered by us in a sales unit of 1250 meters If you need a larger quantity, you can contact us at any time. We will make a special offer for you
This product is recommended as accessory for
 |
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
 ≈ £56.23 | ≈ $74.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1415 indoor arch IB 7 without dowels indoor arches
The flame-retardant and halogen-free indoor bend IB is used for kink-free redirection of speedpipe indoor 7 in the in-house area. Any number of indoor arches can be stacked together. The product is ... Lieske Part No.: 1593323 Mfg Part No: 1415 |
24,84 EUR 25,92 EUR
≈ £21.36 | ≈ $28.32
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1414 indoor arch IB 7 with dowels indoor arches
The flame-retardant and halogen-free indoor bend IB is used for kink-free redirection of speedpipe indoor 7 in the in-house area. Any number of indoor arches can be stacked together. The product is ... Lieske Part No.: 1593324 Mfg Part No: 1414 |
26,68 EUR 27,84 EUR
≈ £22.94 | ≈ $30.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1968 SK 7 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593327 Mfg Part No: 1968 |
9,83 EUR 10,26 EUR
≈ £8.45 | ≈ $11.21
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1324 EZA-t 7/2.0-4.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 7 mm for cables ... Lieske Part No.: 1593378 Mfg Part No: 1324 |
224,02 EUR 233,76 EUR
≈ £192.66 | ≈ $255.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1320 EZA-t 7/0.8-2.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 7 mm for cables ... Lieske Part No.: 1593379 Mfg Part No: 1320 |
224,02 EUR 233,76 EUR
≈ £192.66 | ≈ $255.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1335 EBM-GS 7/0.8-4.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593830 Mfg Part No: 1335 |
326,23 EUR 340,42 EUR
≈ £280.56 | ≈ $371.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1220 DSM 7 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 7 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1593844 Mfg Part No: 1220 |
4,58 EUR 4,78 EUR
≈ £3.94 | ≈ $5.22
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
GABO 2017 KmR 7 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 7 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593858 Mfg Part No: 2017 |
167,44 EUR 174,72 EUR
≈ £144.00 | ≈ $190.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
GABO 1694 ES 7 indoor end plug
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and water-tight with 7 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598271 Mfg Part No: 1694 |
125,35 EUR 130,80 EUR
≈ £107.80 | ≈ $142.90
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
 Draka Comteq 60099788 DRAKA UC home fiber idrop 250 drag & blow I-DH 4 G.657A2
Draka UC home fibre idrop 250 drag & blow I-DH 4 G.657A2 Article No. 60099788SHORT DESCRIPTION: The cable has a diameter of 2.3mm and is suitable for both standard installation and for blowing ... Lieske Part No.: 1981195 Mfg Part No: 60099788 Type: UC home fibre idrop 250 drag & blow I-DH |
-85% 913,80 EUR 6.176,80 EUR
≈ £785.87 | ≈ $1,041.73
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for GABO 3503 sp-i 7x1.5 speed.pipe® Indoor 1250m
|
|
GABO 1204 speedpipe-Schneider
Der speedpipe Schneider und die Rohrschere mit Ratschenantrieb eignen sich für eine fachgerechte Montage. Mit diesen Werkzeugen können speedpipe und speedpipe Rohrverbände spanlos und rechtwinklig ... Lieske Part No.: 701573 Mfg Part No: 1204 |
65,38 EUR 68,22 EUR
≈ £56.23 | ≈ $74.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1415 indoor arch IB 7 without dowels indoor arches
The flame-retardant and halogen-free indoor bend IB is used for kink-free redirection of speedpipe indoor 7 in the in-house area. Any number of indoor arches can be stacked together. The product is ... Lieske Part No.: 1593323 Mfg Part No: 1415 |
24,84 EUR 25,92 EUR
≈ £21.36 | ≈ $28.32
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1414 indoor arch IB 7 with dowels indoor arches
The flame-retardant and halogen-free indoor bend IB is used for kink-free redirection of speedpipe indoor 7 in the in-house area. Any number of indoor arches can be stacked together. The product is ... Lieske Part No.: 1593324 Mfg Part No: 1414 |
26,68 EUR 27,84 EUR
≈ £22.94 | ≈ $30.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1968 SK 7 dust caps pack of 100
Dust caps for use when installing the speed pipe. This will prevent dirt from getting into the pipe during installation. Lieske Part No.: 1593327 Mfg Part No: 1968 |
9,83 EUR 10,26 EUR
≈ £8.45 | ≈ $11.21
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1324 EZA-t 7/2.0-4.0 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 7 mm for cables ... Lieske Part No.: 1593378 Mfg Part No: 1324 |
224,02 EUR 233,76 EUR
≈ £192.66 | ≈ $255.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1320 EZA-t 7/0.8-2.5 indoor single pull seals divisible
The flame-retardant, halogen-free and divisible single-pull seals EZA-t indoor are reusable and are suitable for sealing unoccupied and occupied speedpipe indoor with a diameter of 7 mm for cables ... Lieske Part No.: 1593379 Mfg Part No: 1320 |
224,02 EUR 233,76 EUR
≈ £192.66 | ≈ $255.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1335 EBM-GS 7/0.8-4.0 indoor blow-in sockets with gas stop
The flame-retardant and halogen-free EBM-GS indoor blow-in sockets have an integrated gas stop. They were developed by gabocom to connect occupied speedpipes indoors and to seal them longitudinally ... Lieske Part No.: 1593830 Mfg Part No: 1335 |
326,23 EUR 340,42 EUR
≈ £280.56 | ≈ $371.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1220 DSM 7 indoor double sockets
The flame-retardant and halogen-free double plug-in sockets DSM indoor connect speedpipe indoor with a diameter of 7 mm. They are pressure-tight up to 15 bar, tensile-resistant and can be installed ... Lieske Part No.: 1593844 Mfg Part No: 1220 |
4,58 EUR 4,78 EUR
≈ £3.94 | ≈ $5.22
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
GABO 2017 KmR 7 indoor marking rings
The identification plates with pipe closure KmR indoor are used to label speedpipe indoor with a diameter of 7 mm in the branch area with the customer address using permanent markers such as Edding. Lieske Part No.: 1593858 Mfg Part No: 2017 |
167,44 EUR 174,72 EUR
≈ £144.00 | ≈ $190.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
GABO 1694 ES 7 indoor end plug
The flame-retardant and halogen-free end plugs ES indoor are suitable for sealing speedpipe indoors gas-tight and water-tight with 7 mm to 0.5 bar. They are tensile and can be installed quickly and ... Lieske Part No.: 1598271 Mfg Part No: 1694 |
125,35 EUR 130,80 EUR
≈ £107.80 | ≈ $142.90
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|