Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off
|
-6% 23,25 EUR 24,82 EUR |
|||||||||||
|
( 27,67 EUR incl. VAT ) ≈ £19.46 | ≈ $25.55 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: 4 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 245931 | ||||||||||
| Mfg Part No: | 202290244000 | ||||||||||
| UPC/EAN: | 8012823116464 | ||||||||||
| Weight: | 0.1164 kg | ||||||||||
| Type: | 20.22.9.024.4000 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Finder 202290244000:
Applications
The impulse switch is specifically designed for applications requiring a switching sequence with two switching stages, for example in the control of blinds or roller shutters operated in two phases (e.g. on-on / off-off). It can also be used for lighting control, particularly in areas where an automated or push-button-controlled switching sequence is required. The switching sequence on-on / off-off enables precise control of the load, with the device remaining in the last switching position after the supply voltage is switched off.
Functions and Equipment in Detail
The device features a test button, allowing manual verification of the relay's function, as well as a mechanical switching position indicator, which visually displays the current state of the contacts. The coil is rated for a nominal voltage of 24 V DC, with a rated power of 5 W and a resistance of 105 Ohm. The maximum switching capacity is 4000 VA (AC1) and 750 VA (AC15) at 230 V AC. For various lamp types, specific load limits are defined: incandescent and halogen lamps up to 2000 W, fluorescent lamps compensated up to 750 W, uncompensated up to 1000 W, energy-saving lamps up to 400 W, LED lamps (230 V AC) up to 400 W, NV halogen lamps or LED with EVG up to 400 W and with KVG up to 800 W.
Technology Explained Simply
The impulse switch operates on the principle of a step switch, where the contacts are moved to the next switching position by briefly energizing the coil. The switching sequence on-on / off-off means that with each impulse, the contacts move to the next position, with the first switching stage (on), the second (on), and the reset (off-off) being defined. The coil is briefly activated via an external control signal (e.g. push-button), causing the magnetic force to move the contacts. The mechanical indicator and test button support maintenance and diagnostics during operation.
Compatibility and Accessories
The device is designed for mounting on a 35 mm support rail and can be combined with suitable spacers (e.g. 022.09) to ensure correct spacing during installation in an enclosure. It is designed for use with push-buttons (e.g. type 026.00) that serve to control the relay. Compatibility with various lamp types and ballasts (EVG, KVG) is ensured by the defined load limits.
Mounting and Installation
Mounting is done on a 35 mm support rail, with the device width being 17.5 mm. Connections are made via screw or cage terminals, ensuring a secure connection. Installation requires no additional tools or components, as the device is designed as a single module. The ambient temperature must be between –40 °C and +40 °C, with the protection rating IP 20 ensuring mechanical and electrical safety within a closed enclosure.
Advantages in Operation
The impulse switch offers a high mechanical service life of 300,000 switching operations and an electrical service life of 100,000 switching operations under AC1 load. The minimum actuation duration is 0.1 seconds, the maximum 1 hour, enabling use in various control systems. The use of AgSnO2 as contact material ensures low wear and high switching reliability. The switching position indicator and test button facilitate maintenance and fault diagnosis during operation.
Protection Rating and Environmental Conditions
The relay protection rating IP 20 means the device is protected against contact with fingers and against solid foreign objects, but not against water or dust. It is therefore intended for use in closed enclosures, not for outdoor use. The ambient temperature must be between –40 °C and +40 °C, with the heat dissipation at rated current and unenergized coil being 1.3 W.
Approvals and Standards
The device complies with the requirements of standard EN 60601-1 with 2 x MOPP (Maximum Operating Patient Protection), enabling its use in medical applications. The voltage withstand is 4 kV between coil and contact, and 2 kV between open contacts. The insulation properties are designed for safe operation in electrical installations.
| General | |
| Degree of protection | IP 20 |
| Operating voltage | 24 V DC |
| Rated power | 5 W |
| Coil resistance | 105 Ohm |
| Max. continuous current | 16 A |
| Nominal voltage | 250 V AC |
| Max. switching capacity AC1 | 4000 VA |
| Max. switching capacity AC15 | 750 VA |
| Switching sequence | on on / off off |
| Contact material | AgSnO2 |
| Min. switching duration | 0.1 s |
| Max. switching duration | 1 h |
| Ambient temperature | -40…+40 °C |
| Voltage withstand coil/contact | 4 kV |
| Voltage withstand between open contacts | 2 kV |
| Heat emission | 1,3 W |
| Number of contacts | 2 Normally open contact (NO) |
| DIN rail | 35 mm |
| Approval | EN 60601-1, 2 x MOPP |
Questions & answers
What is the delivery time of Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off?
The article Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Finder 202290244000 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off always at the best possible price. We can give you a discount of 2% on Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 15 pieces of Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off we can offer you a price of 22,73 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Finder 202290244000 20.22.9.024.4000 surge switch 24 VDC REG 2NO An On/Off Off
|
Finder 02209 022.09 spacing piece
Distanzstück, Plastik, grau, 9 mm breit, zum Trennen von Installationsschützen Serie 22.3x auf der DIN-SchieneLieske Part No.: 691501 Mfg Part No: 02209 Type: 022.09 |
-7% 12,25 EUR 13,11 EUR
![]() ≈ £10.25 | ≈ $13.46
Made to order · Delivery time approx. 20 workdaysinfo_outline
|





