Finder 202290244000, EAN: 8012823116464

Finder 20.22.9.024.4000 surge switch 24 VDC

Installation > Modular devices / equipment installation > Impulse switch / relay

Finder 20.22.9.024.4000 surge switch 24 VDC

Lieske Part No. 245931
Mfg Part No 202290244000
EAN-Code 8012823116464
Manufacturer Finder
Here only 23,25 EUR
27,67 EUR incl. VAT

Further information for Finder 20.22.9.024.4000 surge switch 24 VDC

General
Degree of protectionIP 20
Operating voltage24 V DC
Rated power5 W
Coil resistance105 Ohm
Max. continuous current16 A
Nominal voltage250 V AC
Max. switching capacity AC14000 VA
Max. switching capacity AC15750 VA
Switching sequenceon on / off off
Contact materialAgSnO2
Min. switching duration0.1 s
Max. switching duration1 h
Ambient temperature-40…+40 °C
Voltage withstand coil/contact4 kV
Voltage withstand between open contacts2 kV
Heat emission1,3 W
Number of contacts2 Normally open contact (NO)
DIN rail35 mm
ApprovalEN 60601-1, 2 x MOPP
The impulse switch from manufacturer Finder, type 20.22.9.024.4000, is a modular relay for mounting on a 35 mm support rail in accordance with EN 60715. It is used for controlling electrical loads such as blinds, roller shutters, window shutters, as well as for lighting control in hallways, bedrooms or living rooms, for example in hotels, offices or hospitals. The device features two close contacts and is rated for a continuous current of 16 A at a nominal voltage of 250 V AC. The contact materials consist of AgSnO2, a cadmium-free alloy material that ensures high service life and reliability during frequent switching operations.

Applications
The impulse switch is specifically designed for applications requiring a switching sequence with two switching stages, for example in the control of blinds or roller shutters operated in two phases (e.g. on-on / off-off). It can also be used for lighting control, particularly in areas where an automated or push-button-controlled switching sequence is required. The switching sequence on-on / off-off enables precise control of the load, with the device remaining in the last switching position after the supply voltage is switched off.

Functions and Equipment in Detail
The device features a test button, allowing manual verification of the relay's function, as well as a mechanical switching position indicator, which visually displays the current state of the contacts. The coil is rated for a nominal voltage of 24 V DC, with a rated power of 5 W and a resistance of 105 Ohm. The maximum switching capacity is 4000 VA (AC1) and 750 VA (AC15) at 230 V AC. For various lamp types, specific load limits are defined: incandescent and halogen lamps up to 2000 W, fluorescent lamps compensated up to 750 W, uncompensated up to 1000 W, energy-saving lamps up to 400 W, LED lamps (230 V AC) up to 400 W, NV halogen lamps or LED with EVG up to 400 W and with KVG up to 800 W.

Technology Explained Simply
The impulse switch operates on the principle of a step switch, where the contacts are moved to the next switching position by briefly energizing the coil. The switching sequence on-on / off-off means that with each impulse, the contacts move to the next position, with the first switching stage (on), the second (on), and the reset (off-off) being defined. The coil is briefly activated via an external control signal (e.g. push-button), causing the magnetic force to move the contacts. The mechanical indicator and test button support maintenance and diagnostics during operation.

Compatibility and Accessories
The device is designed for mounting on a 35 mm support rail and can be combined with suitable spacers (e.g. 022.09) to ensure correct spacing during installation in an enclosure. It is designed for use with push-buttons (e.g. type 026.00) that serve to control the relay. Compatibility with various lamp types and ballasts (EVG, KVG) is ensured by the defined load limits.

Mounting and Installation
Mounting is done on a 35 mm support rail, with the device width being 17.5 mm. Connections are made via screw or cage terminals, ensuring a secure connection. Installation requires no additional tools or components, as the device is designed as a single module. The ambient temperature must be between –40 °C and +40 °C, with the protection rating IP 20 ensuring mechanical and electrical safety within a closed enclosure.

Advantages in Operation
The impulse switch offers a high mechanical service life of 300,000 switching operations and an electrical service life of 100,000 switching operations under AC1 load. The minimum actuation duration is 0.1 seconds, the maximum 1 hour, enabling use in various control systems. The use of AgSnO2 as contact material ensures low wear and high switching reliability. The switching position indicator and test button facilitate maintenance and fault diagnosis during operation.

Protection Rating and Environmental Conditions
The relay protection rating IP 20 means the device is protected against contact with fingers and against solid foreign objects, but not against water or dust. It is therefore intended for use in closed enclosures, not for outdoor use. The ambient temperature must be between –40 °C and +40 °C, with the heat dissipation at rated current and unenergized coil being 1.3 W.

Approvals and Standards
The device complies with the requirements of standard EN 60601-1 with 2 x MOPP (Maximum Operating Patient Protection), enabling its use in medical applications. The voltage withstand is 4 kV between coil and contact, and 2 kV between open contacts. The insulation properties are designed for safe operation in electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/245931
qrcode für Finder 20.22.9.024.4000 surge switch 24 VDC