Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable
|
60,50 EUR |
|||||||||||
|
incl. 26,83 EUR copper surcharge ( 71,99 EUR incl. VAT ) ≈ £50.58 | ≈ $66.85 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 925621 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 0113740400000 | ||||||||||
| UPC/EAN: | 4035996020295 | ||||||||||
| Weight: | 2.771 kg | ||||||||||
| Type: | N2XS2Y 1X185/25 12/20 KV SW | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Faber Kabel 0113740400000:
Applications
The cable is intended for use in various environments, including underground installation, underwater installation, outdoors, as well as indoors and in cable ducts. It is particularly designed for applications in power plants, industrial facilities, and distribution networks where high mechanical load capacity and reliability are required. Installation indoors and in cable ducts requires consideration of the properties of the PE outer sheath: this is halogen-free, but not flame-retardant according to DIN VDE 0482-332-1. Therefore, use indoors is only permitted in compliance with applicable fire protection regulations and taking into account specific requirements for flame retardancy.
Functions and Equipment in Detail
The cable features a durable PE outer sheath that protects it against mechanical stresses during installation and operation. This sheath enables robust installation, even under difficult conditions, and ensures a long service life of the cable. The construction with a single conductor (1X) and a separate protective conductor (25 mm²) ensures safe and reliable power transmission. The combination of 185 mm² main conductor and 25 mm² protective conductor is designed for applications with high current loads and corresponding protection requirements.
Technology Explained Simply
The designation N2XS2Y describes the cable’s construction: N stands for a non-metallic, halogen-free insulating material (here PE), 2X for two conductors (one main conductor and one protective conductor), S2 for a metallic shielding (here steel), and Y for a halogen-free, non-metallic outer sheath (PE). The voltage class 12/20 kV means the cable is designed for an operating voltage up to 20 kV, with a test voltage of 12 kV. The SW designation refers to the special version for installation in earth, water, outdoors, as well as indoors and in cable ducts. The halogen-free PE outer sheath reduces the formation of toxic gases in case of fire, which is particularly advantageous for indoor installations.
Compatibility and Accessories
The cable is designed for use in existing and new medium-voltage networks and can be connected using standard connection techniques and components. It is compatible with common installation and mounting methods for underground cables. The use of special connection elements, such as cable lugs or cable clamps, is required to ensure a safe and durable connection. The exact selection of accessories depends on the specific application and local regulations.
Installation and Mounting
Installation is typically carried out by professional electricians. Underground or underwater installation requires careful planning of the installation route, including consideration of bending radii and mechanical stresses. When installing indoors and in cable ducts, attention must be paid to the flame retardancy of the PE outer sheath, as it is not flame-retardant according to DIN VDE 0482-332-1. Installation should be carried out in such a way that no mechanical damage occurs to the cable. The cable connections at the ends are made using suitable cable termination components designed for the voltage class 12/20 kV.
Operational Advantages
The cable is characterised by high mechanical strength, making it suitable for demanding operating conditions. The halogen-free PE outer sheath reduces fire hazard and the formation of toxic gases, which is particularly beneficial for indoor installations. The robust construction ensures a long service life and minimises maintenance requirements. Installation in various environments, including water and earth, expands the range of applications and reduces the need for additional protective measures.
| General | |
| Cable type | N2XS2Y |
| Number of conductors | 1 |
| Main conductor cross-section | 185 mm² |
| Protective conductor cross-section | 25 mm² |
| Nominal voltage | 12/20 kV |
| Installation method | in earth, water, outdoors, indoors, and in cable channels |
| Material outer sheath | PE |
| Sheath texture | halogen-free |
| Flame retardancy | non-flame retardant according to DIN VDE 0482-332-1 |
| Model | SW |
| Type of delivery | Cut length |
The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.
Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
Questions & answers
What is the delivery time of Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable?
The article Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Faber Kabel 0113740400000 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable always at the best possible price. We can give you a discount of 2% on Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 10 meters of Faber Kabel 0113740400000 N2XS2Y 1X185/25 12/20 kV SW power cable 12/20 kV SW drum variable we can offer you a price of 57,47 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



