Elsner 10130 Solexa 230 V aluminium brushed shading control
|
460,68 EUR |
|||||||||||
|
( 548,21 EUR incl. VAT ) ≈ £383.75 | ≈ $505.37 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 501859 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 10130 | ||||||||||
| UPC/EAN: | 4051996101307 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 10130 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 10130:
Applications
This shading control is suitable for the automatic control of awnings or blinds. It ensures that shading elements extend when sufficient brightness is detected and retract when rain, wind, or frost occurs. Alarm functions such as rain or wind alarm can be individually switched off, allowing the user to customize the automation. For blinds, the lamella position (reversal) can additionally be learned to allow indirect light into the room. The control can also function as a central unit to operate motor control devices IMSG 230. Simultaneous control of multiple drives is possible via a group control relay.
Functions and Equipment in Detail
The control unit enables basic settings, adjustment of automation functions, and manual operation. An individual shading position can be set for the automation mode, so that the shading does not close completely. The weather station measures outdoor temperature in the range of 0 to +50 °C, wind speed up to 35 m/s, precipitation, and brightness up to 150,000 Lux. The data are transmitted wirelessly to the control unit, which sends control commands to the weather station.
Technology Explained Simply
Wireless communication between the control unit and the weather station operates in the 868 MHz band with a maximum transmission power of 10 mW. The weather station is equipped with spring-loaded terminals that securely connect conductors with a cross-section of 0.5 to 1.5 mm² and an outer diameter up to 10 mm. The stripping length is 10 mm. The supply voltage is 230 V / 50 Hz or 110 V / 60 Hz, with a maximum power consumption of 2 W. The drive output features a Micro Contact (μ) with an integrated fuse T 5.0 AH and can handle a maximum motor load of 500 VA (2.17 A). The reverse direction pause is 1 second to avoid mechanical stress.
Compatibility and Accessories
The shading control is compatible with 230 V drives and can simultaneously control multiple drives via a group control relay. Connected drives can also be operated manually via the wireless remote control Remo 8 or via the button interface RF-B2-UP. The Remo 8 remote control is available in various color variants, including white and aluminum-colored. The weather station is equipped with a combination holder enabling wall or mast mounting.
Installation and Mounting
Mounting is either surface-mounted or on a mast. The control unit is installed indoors, while the weather station is installed outdoors. Cabling within the building is reduced to a minimum, as control and power supply are handled via the control unit and weather station. The weather station connects directly to the drive, eliminating the need for additional control lines within the building. This makes the installation suitable for retrofits as well.
Operational Advantages
The shading control offers high flexibility through individual settings for automation functions. Wireless communication between the control unit and weather station reduces installation effort and enables neat cabling. The integrated fuse in the drive output protects against overloads. The control is designed for an ambient temperature of 0 to +45 °C and can operate at a relative humidity of 5 to 80 % (non-condensing). Storage of the control unit is at 10 to +50 °C, and for the weather station at 30 to +70 °C. Protection class II and pollution degree 2 meet requirements for use in residential and office buildings. Overvoltage category III protects the system against electrical overvoltages. The housing is made of plastic, partially lacquered, and is available in the colors White matte (similar to RAL 9016 Traffic White), Aluminum matte, and Pearl dark gray matte. The total weight is approximately 260 g, with the control unit including batteries weighing approximately 170 g. The batteries are AA/Mignon cells with a voltage of 1.2 to 1.5 V.
Functions and Equipment in Detail
The control unit features a display for showing weather data, alarm messages, and operating mode. The integrated buttons enable manual operation and adjustment of automation functions. The weather station measures outdoor temperature, wind speed, precipitation, and brightness. The data are transmitted wirelessly to the control unit, which sends control commands to the weather station. The control is designed for indoor use, with a protection rating of IP20, and can be installed either surface-mounted or on a mast.
Compatibility and Accessories
The shading control is compatible with 230 V drives and can simultaneously control multiple drives via a group control relay. Connected drives can also be operated manually via the wireless remote control Remo 8 or via the button interface RF-B2-UP. The Remo 8 remote control is available in various color variants, including white and aluminum-colored. The weather station is equipped with a combination holder enabling wall or mast mounting.
Installation and Mounting
Mounting is either surface-mounted or on a mast. The control unit is installed indoors, while the weather station is installed outdoors. Cabling within the building is reduced to a minimum, as control and power supply are handled via the control unit and weather station. The weather station connects directly to the drive, eliminating the need for additional control lines within the building. This makes the installation suitable for retrofits as well.
Operational Advantages
The shading control offers high flexibility through individual settings for automation functions. Wireless communication between the control unit and weather station reduces installation effort and enables neat cabling. The integrated fuse in the drive output protects against overloads. The control is designed for an ambient temperature of 0 to +45 °C and can operate at a relative humidity of 5 to 80 % (non-condensing). Storage of the control unit is at 10 to +50 °C, and for the weather station at 30 to +70 °C. Protection class II and pollution degree 2 meet requirements for use in residential and office buildings. Overvoltage category III protects the system against electrical overvoltages. The housing is made of plastic, partially lacquered, and is available in the colors White matte (similar to RAL 9016 Traffic White), Aluminum matte, and Pearl dark gray matte. The total weight is approximately 260 g, with the control unit including batteries weighing approximately 170 g. The batteries are AA/Mignon cells with a voltage of 1.2 to 1.5 V. Note: Batteries are not included in the delivery scope.
| Connection for power supply and drive output | |
| Spring-loaded terminals rigid | 0.5 …1.5 mm² |
| Spring clamp stripping length | 10 mm |
| Spring clamp outer diameter wire | Ø ≤ 10 mm |
| Wind measurement range | 0…35 m/s |
| Brightness measurement range | 0 Lux … 150 000 Lux |
| Drive output | |
| Normally open contact | Micro Contact (μ) |
| With integrated fuse | T 5.0 AH |
| Maximum motor load at drive output | 500VA (2.17A) |
| Direction reversal pause | 1 s |
| General | |
| Housing | Plastic (partially lacquered) |
| Colours | White matt (similar to RAL 9016 traffic white), aluminium matt, pearl dark grey matt |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 103 mm × 98 mm × 28 mm |
| Total weight (with batteries) | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| rH (relative humidity), non-condensing | 5...80 % |
| Storage temperature control unit | 10...+50°C |
| Storage temperature in set | 10...+50°C |
| Over voltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Colour | white/translucent |
| Mounting | Surface or mast mounting |
| Weight total | ≈ 260 g |
| Storage temperature weather station | 30...+70°C |
| Power supply | |
| Battery / accumulator voltage | 2 × 1.2...1.5 V AA/Mignon |
| Voltage | 110 V / 60 Hz, 230 V / 50 Hz |
| Power consumption | ≤ 2 W |
| Sensors | |
| Temperature measurement range | 0…+50°C |
| Wireless | |
| Frequency range | 868.0...868.6 MHz |
| Transmitting power | max. 10 mW |
Questions & answers
What is the delivery time of Elsner 10130 Solexa 230 V aluminium brushed shading control?
The article Elsner 10130 Solexa 230 V aluminium brushed shading control is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 10130 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 10130 Solexa 230 V aluminium brushed shading control always at the best possible price. We can give you a discount of 2% on Elsner 10130 Solexa 230 V aluminium brushed shading control if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Elsner 10130 Solexa 230 V aluminium brushed shading control we can offer you a price of 453,77 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

