Surge Protection from Phoenix Contact

You have been filtering for Phoenix Contact and therefore you see now only Surge Protection from Phoenix Contact displayed.
You can choose other manufacturers on the left side in the menu or get the complete overview.

Surge Protection from Phoenix Contact

Phoenix Contact 0441711 Screw termination block - CT-TERMIBLOCK 10 DA - Screw termination block with disconnect contacts for accommodating protective plugs CT and CTM. Use in MCR and telecommunications systems. Design: 10 double wires

Lieske Part No.: 744580
Mfg Part No: 0441711
Type: CT-TERMIBLOCK 10 DA

1.017,45 EUR

≈ £872.97 | ≈ $1,157.86

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1011977 Phoenix TTC-EX-PP Separation plate Separation plate for NS-35/7.5 mounting rails to ensure a gap of 50 mm between the remote signaling module and surge protection in TTC-EX systems.

Lieske Part No.: 1904048
Mfg Part No: 1011977
Type: TTC-EX-PP

12,49 EUR

≈ £10.72 | ≈ $14.21

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1027586 Phoenix TTC-6P-T3-24DC-PT-I surge protection device type 3 Surge protection type 3, consisting of protective plug and base element, with integrated status display for 24 V DC power supplies

Lieske Part No.: 1014860
Mfg Part No: 1027586
Type: TTC-6P-T3-24DC-PT-I

132,91 EUR

≈ £114.04 | ≈ $151.25

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1033786 Phoenix VAL-SEC-T2-2+F-48DC-FM surge arrester type 2 Leakage current-free pluggable surge arrester for 2-pole isolated and earthed direct voltage systems with linear operating characteristics up to 48 V DC, for DIN rail mounting, 3-pole base element ...

Lieske Part No.: 1014853
Mfg Part No: 1033786
Type: VAL-SEC-T2-2+F-48DC-FM

331,74 EUR

≈ £284.63 | ≈ $377.52

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1033788 Phoenix VAL-SEC-T2-2+F-120DC-FM surge arrester type 2 Leakage current-free pluggable surge arrester for 2-pole isolated and earthed direct voltage systems with linear operating characteristics up to 120 V DC, for DIN rail mounting, 3-pole base element ...

Lieske Part No.: 1014856
Mfg Part No: 1033788
Type: VAL-SEC-T2-2+F-120DC-FM

331,74 EUR

≈ £284.63 | ≈ $377.52

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1033789 Phoenix VAL-SEC-T2-2+F-220DC-FM surge arrester type 2 Leakage current-free pluggable surge arrester for 2-pole insulated and earthed direct voltage systems with linear operating characteristics up to 220 V DC, for DIN rail mounting, 3-pole base element ...

Lieske Part No.: 1014855
Mfg Part No: 1033789
Type: VAL-SEC-T2-2+F-220DC-FM

331,74 EUR

≈ £284.63 | ≈ $377.52

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1033790 Phoenix VAL-SEC-T2-2+F-380DC-FM surge arrester type 2 Leakage current-free pluggable surge arrester for 2-pole insulated and earthed direct voltage systems with linear operating characteristics up to 380 V DC, for DIN rail mounting, 3-pole base element ...

Lieske Part No.: 1014854
Mfg Part No: 1033790
Type: VAL-SEC-T2-2+F-380DC-FM

331,74 EUR

≈ £284.63 | ≈ $377.52

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1065316 Phoenix TTC-6-3-HF-12DC-PT surge protection device Surge protection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbit/s).

Lieske Part No.: 1904744
Mfg Part No: 1065316
Type: TTC-6-3-HF-12DC-PT

102,79 EUR

≈ £88.19 | ≈ $116.98

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1065318 Phoenix TTC-6P-1X2-F-24DC-PT-I surge protection device Surge protection, consisting of protective plug and base element, with integrated status display for a 2-wire, floating signal circuit. Indirect grounding via gas discharge tube, HART-capable.

Lieske Part No.: 1904745
Mfg Part No: 1065318
Type: TTC-6P-1X2-F-24DC-PT-I

151,71 EUR

≈ £130.17 | ≈ $172.65

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1065320 Phoenix TTC-6P-2X1-F-24DC-PT-I surge protection device Surge protection, consisting of protective plug and base element, with integrated status display for two signal wires with common reference potential, e.g. digital IN/OUT. Indirect earthing via gas ...

Lieske Part No.: 1904746
Mfg Part No: 1065320
Type: TTC-6P-2X1-F-24DC-PT-I

151,71 EUR

≈ £130.17 | ≈ $172.65

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1077106 Phoenix TTC-6-1X2-TELE-PT surge protection device Surge protection for analog and digital telecommunications interfaces (VDSL up to 300 Mbit/s, G.fast up to 1.5 Gbit/s). Integrated overload protection (Power-cross).

Lieske Part No.: 1919922
Mfg Part No: 1077106
Type: TTC-6-1X2-TELE-PT

110,29 EUR

≈ £94.63 | ≈ $125.51

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1088564 Phoenix CLT-10P/2-VF-230V-IP surge protection plug Surge protection plug can be plugged directly into 2 terminal blocks, with integrated status display on the module for a 2-wire, floating signal circuit with high nominal current. Nominal voltage: 230 ...

Lieske Part No.: 1919920
Mfg Part No: 1088564
Type: CLT-10P/2-VF-230V-I-P

130,15 EUR

≈ £111.67 | ≈ $148.11

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1088567 Phoenix CLT-20P/4-VF-230V-IP surge protection plug Surge protection plug can be plugged directly into 4 terminal blocks, with integrated status display on the module for a 4-wire, floating signal circuit with high nominal current. Nominal voltage: 230 ...

Lieske Part No.: 1919921
Mfg Part No: 1088567
Type: CLT-20P/4-VF-230V-I-P

260,11 EUR

≈ £223.17 | ≈ $296.01

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1088569 Phoenix CLT-10P/2-2-12V-IP surge protection plug Surge protection plug can be plugged directly into 2 terminal blocks, with integrated status display on the module for a 2-wire, earth-potential-free signal circuit. Nominal voltage: 12 V DC

Lieske Part No.: 1919917
Mfg Part No: 1088569
Type: CLT-10P/2-2-12V-I-P

130,15 EUR

≈ £111.67 | ≈ $148.11

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1088570 Phoenix CLT-10P/2-2-24V-IP surge protection plug Surge protection plug can be plugged directly into 2 terminal blocks, with integrated status display on the module for a 2-wire, earth-potential-free signal circuit. Nominal voltage: 24 V DC

Lieske Part No.: 1919918
Mfg Part No: 1088570
Type: CLT-10P/2-2-24V-I-P

130,15 EUR

≈ £111.67 | ≈ $148.11

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1088573 Phoenix CLT-10P/2-2-60V-IP surge protection plug Surge protection plug can be plugged directly into 2 terminal blocks, with integrated status display on the module for a 2-wire, earth-potential-free signal circuit. Nominal voltage: 60 V DC

Lieske Part No.: 1919919
Mfg Part No: 1088573
Type: CLT-10P/2-2-60V-I-P

130,15 EUR

≈ £111.67 | ≈ $148.11

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1106014 Phoenix TTC-6P-4-24DC-PT-I surge protection device Surge protection, consisting of protective plug and base element, with integrated status display for a 4-wire, floating signal circuit with high nominal current. Ideal for 4-wire measurements, e.g. of ...

Lieske Part No.: 1775496
Mfg Part No: 1106014
Type: TTC-6P-4-24DC-PT-I

209,47 EUR

≈ £179.73 | ≈ $238.38

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1106015 Phoenix TTC-6P-4-24DC-IP surge protection plug Surge protection plug with integrated status display on the module for a 4-wire floating signal circuit with high nominal current. Nominal voltage: 24 V DC

Lieske Part No.: 1101096
Mfg Part No: 1106015
Type: TTC-6P-4-24DC-I-P

124,07 EUR

≈ £106.45 | ≈ $141.19

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1109712 Phoenix TTC-6-3-HF-F-12DC-PT surge protection device Surge protection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbit/s).

Lieske Part No.: 1909330
Mfg Part No: 1109712
Type: TTC-6-3-HF-F-12DC-PT

111,63 EUR

≈ £95.78 | ≈ $127.03

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1168940 Phoenix FLT-SEC-ZP2-3S-255/7.5 combination arrester type 1/2/3 Lightning arrester, according to Type 1 / Class I, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). Suitable for equipotential bonding in systems without external ...

Lieske Part No.: 1920344
Mfg Part No: 1168940
Type: FLT-SEC-ZP2-3S-255/7.5

370,97 EUR

≈ £318.29 | ≈ $422.16

Delivery time from supplier's stock (ca.) 5 workdays

Phoenix Contact 1168942 Phoenix FLT-SEC-ZP2-3C-255/7.5 combination arrester type 1/2 Lightning current arrester, in accordance with Type 1 / Class I, for 3-phase power supply networks, with combined N and PE (L1, L2, L3, PEN). Suitable for equipotential bonding in systems without ...

Lieske Part No.: 1920350
Mfg Part No: 1168942
Type: FLT-SEC-ZP2-3C-255/7.5

282,63 EUR

≈ £242.50 | ≈ $321.63

On order · Delivery time approx. 20 workdays

Phoenix Contact 1168943 Phoenix FLT-SEC-ZP2-3S-255/12.5 combination arrester type 1/2 Lightning arrester, according to Type 1 / Class I, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). For lightning protection equipotential bonding according to lightning ...

Lieske Part No.: 1920343
Mfg Part No: 1168943
Type: FLT-SEC-ZP2-3S-255/12.5

576,84 EUR

≈ £494.93 | ≈ $656.44

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1168946 Phoenix FLT-SEC-ZP2-3C-255/12.5 combination arrester type 1/2 Lightning current arrester, according to Type 1 / Class I, for 3-phase power supply networks, with combined N and PE (L1, L2, L3, PEN). For lightning protection equipotential bonding according to ...

Lieske Part No.: 1920347
Mfg Part No: 1168946
Type: FLT-SEC-ZP2-3C-255/12.5

440,70 EUR

≈ £378.12 | ≈ $501.52

Made to order · Delivery time approx. 20 workdays

Phoenix Contact 1168947 Phoenix FLT-SEC-ZP2 FM MODULES Accessories Optional remote signal module. Can only be used in the FLT-SEC-ZP2.

Lieske Part No.: 1920346
Mfg Part No: 1168947
Type: FLT-SEC-ZP2 FM-MODULE

45,36 EUR

≈ £38.92 | ≈ $51.62

Made to order · Delivery time approx. 20 workdays

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Protective SPD Solutions for Industry & Electrical Installation

Lightning protection and overvoltage dissipation are not optional – they are essential. Whether Type 2 switchgear, Type 3 end devices or ATEX-certified modules: our selection covers all protection classes.

Typical Application Areas

🔧 Switchgear	🖥 Server Rooms	🔬 Building Systems	🏭 Industrial Plants	⚡ IT Infrastructure

🔌 ATEX Areas	📋 Data Lines	💡 Energy Saving	🏛 Government	🚪 Telecom

Why Industry-Electronics for Surge Protection?

✓ Certified & Compliant All products tested to EN 61643, IEC 61643 and ATEX standards.	⚡ Fast Delivery Top sellers like ABB OVR & Dehn usually in stock for quick dispatch.	🔧 Expert Support Our engineers assist with selection & design for your project.

🏭 B2B Trade Specialist Pure trade specialist for over 30 years. No consumer pricing.	💡 Fair Pricing Special conditions for commercial & industrial customers on request.	📋 Extensive Range Over 500,000 articles – from standard to custom solutions.

Related Categories: Power Line Filters | Power Strips