Cable support systems, cable trays and accessories in Wiring systems
Cable support systems, cable trays and accessories from Niedax
 |
 Niedax KGV60E5 KGV 60 E5 articulated connector vertical H60 mm stainless steel 1.4571
Joint connector, vertical, for creating vertical angle connections of continuous cable ladders, including appropriate stainless steel fastening accessories. Potential equalization is achieved by ...Lieske Part No.: 320053 Mfg Part No: KGV60E5 Type: KGV 60 E5 |
562,40 EUR
 ≈ £470.73 | ≈ $629.33
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KGV60F articulated connector vertical H60 mm hot-dip galvanized DIN EN ISO 1461
Joint connector, vertical, for creating vertical angle connections of continuous cable ladders, including hot-dip galvanized proportional fastening accessories. The potential equalization is achieved ... Lieske Part No.: 849699 Mfg Part No: KGV60F Type: KGV 60 F |
239,40 EUR
≈ £200.38 | ≈ $267.89
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KGV60S articulated connector vertical H60 mm galvanized by continuous hot-dip process DIN EN 10346
NIEDAX - Make: PER 60 S Vertical joint connector, for cable ladders, to produce vertical direction changes, galvanized to DIN EN 10346, including dip galvanized share moderate fixing accessories. Lieske Part No.: 475642 Mfg Part No: KGV60S Type: KGV 60 S |
219,45 EUR
≈ £183.68 | ≈ $245.56
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Niedax KHN 60X1.5/6 E3L KHN60X1.5/6E3L cable carrier beam
Lieske Part No.: 393394 Mfg Part No: KHN 60X1.5/6 E3L Type: KHN60X1.5/6E3L |
387,03 EUR 403,33 EUR
≈ £323.94 | ≈ $433.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KI80 screw head plate for profile I 80 hot-dip galvanized DIN EN ISO 1461
NIEDAX - Make: AI 8 head plate, for section I 8 / ... DIN 25, for mounting on horizontal ceilings, and for the production of suspended supports system-HI 8 / ..., the pipeline route runs parallel ... Lieske Part No.: 863605 Mfg Part No: KI80 Type: KI 80 |
69,06 EUR
≈ £57.80 | ≈ $77.28
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KIA80 head plate adapter for profile I 80 hot-dip galvanized DIN EN ISO 1461
Head plate adapter, plug-in system consisting of two angles 60 x 60 x 6 mm and two adapter strips with recess for holding the hanging post head plate, to increase the center distance of the dowels ... Lieske Part No.: 547689 Mfg Part No: KIA80 Type: KIA 80 |
134,42 EUR
≈ £112.51 | ≈ $150.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KIDK80 clamp head plate for profile I 80 hot-dip galvanized DIN EN ISO 1461
NIEDAX - Make: KIDK 80 Head plate, clamping to the horizontally extending beams of steel structures for the production of suspended supports system I 80 / ... the cable route of crossing passes to ... Lieske Part No.: 555986 Mfg Part No: KIDK80 Type: KIDK 80 |
137,46 EUR
≈ £115.05 | ≈ $153.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KIDP80 clamp head plate for profile I 80 hot-dip galvanized DIN EN ISO 1461
NIEDAX - Make: KIDP 80 Head plate, clamping to the horizontally extending beams of steel structures for the production of suspended supports system I 80 / ... route of the cable runs parallel to ... Lieske Part No.: 215014 Mfg Part No: KIDP80 Type: KIDP 80 |
95,86 EUR
≈ £80.23 | ≈ $107.27
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KIGV80 screw head plate for profile I 80 vertically adjustable
NIEDAX - Make: KIGV 80 head plate with joint, parallel to the profile, the production of suspended supports system I 80 / ..., for assembly on sloping ceilings or steel profiles with a vertical ... Lieske Part No.: 480738 Mfg Part No: KIGV80 Type: KIGV 80 |
114,19 EUR
≈ £95.58 | ≈ $127.78
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KIQ80 screw head plate cross for profile I 80 hot-dip galvanized DIN EN ISO 1461
Screw head plate, head plate with two welded connection profiles, for mounting on horizontal ceilings, for cable routes across the hanging support, including hot-dip galvanized fastening accessories. Lieske Part No.: 651408 Mfg Part No: KIQ80 Type: KIQ 80 |
79,33 EUR
≈ £66.40 | ≈ $88.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK110.200 KK 110.200 GFK cable duct 110x200x3000 mm angled connector unclamped
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, with transverse reinforcements (5 mm) over the entire cable tray width, mechanical strength in accordance with ... Lieske Part No.: 792380 Mfg Part No: KK110.200 Type: KK 110.200 |
219,45 EUR
≈ £183.68 | ≈ $245.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK110.300 cable tray GFK 110x300x3000 mm with formed connection.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, with transverse reinforcements (5 mm) over the entire cable tray width, mechanical strength in accordance with ... Lieske Part No.: 923415 Mfg Part No: KK110.300 Type: KK 110.300 |
261,35 EUR
≈ £218.75 | ≈ $292.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK110.400 KK 110.400 GFK cable duct 110x400x3000 mm shaped, connected, unperforated, pressed, grey
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, with transverse reinforcements (5 mm) over the entire cable tray width, mechanical strength in accordance with ... Lieske Part No.: 467532 Mfg Part No: KK110.400 Type: KK 110.400 |
305,24 EUR
≈ £255.49 | ≈ $341.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK50.050 KK 50.050 GFK cable duct 50x50x3000 mm shaped Ver
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, ... Lieske Part No.: 467528 Mfg Part No: KK50.050 Type: KK 50.050 |
86,92 EUR
≈ £72.75 | ≈ $97.26
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK50.100 KK 50.100 GFK cable duct 50x100x3000 mm angled connector uncoated
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, ... Lieske Part No.: 976030 Mfg Part No: KK50.100 Type: KK 50.100 |
97,47 EUR
≈ £81.58 | ≈ $109.07
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK50.150 KK 50.150 GFK cable duct 50x150x3000 mm angled connector uncoated
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, ... Lieske Part No.: 163095 Mfg Part No: KK50.150 Type: KK 50.150 |
108,87 EUR
≈ £91.12 | ≈ $121.83
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK50.200 cable trough GFK 50x200x3000 mm with shaped connection end.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, ... Lieske Part No.: 807751 Mfg Part No: KK50.200 Type: KK 50.200 |
120,27 EUR
≈ £100.67 | ≈ $134.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK50.300 KK 50.300 GFK cable duct 50x300x3000 mm angled connector unclamped
GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, ... Lieske Part No.: 464125 Mfg Part No: KK50.300 Type: KK 50.300 |
146,78 EUR
≈ £122.85 | ≈ $164.25
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.100 cable duct GFK 80x100x3000 mm with shaped coupling.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 369798 Mfg Part No: KK80.100 Type: KK 80.100 |
114,57 EUR
≈ £95.90 | ≈ $128.20
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.150 cable trough GFK 80x150x3000 mm with shaped coupling.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 323400 Mfg Part No: KK80.150 Type: KK 80.150 |
141,07 EUR
≈ £118.08 | ≈ $157.86
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.200 cable tray GFK 80x200x3000 mm with formed connection.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 681416 Mfg Part No: KK80.200 Type: KK 80.200 |
157,89 EUR
≈ £132.15 | ≈ $176.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.250 KK 80.250 GFK cable duct 80x250x3000 mm shaped, connected, unperforated, pressed, grey
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 1320799 Mfg Part No: KK80.250 Type: KK 80.250 |
188,10 EUR
≈ £157.44 | ≈ $210.48
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.300 KK 80.300 GFK cable duct 80x300x3000 mm
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 193544 Mfg Part No: KK80.300 Type: KK 80.300 |
209,19 EUR
≈ £175.09 | ≈ $234.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax KK80.400 cable duct GFK 80x400x3000 mm with shaped coupling.
GRP cable tray, pressed, with unperforated side rails and base, with molded connector and with transverse reinforcements (5 mm) over the entire cable tray width in the base, mechanical strength ... Lieske Part No.: 408060 Mfg Part No: KK80.400 Type: KK 80.400 |
278,16 EUR
≈ £232.82 | ≈ $311.26
Made to order · Delivery time approx. 20 workdaysinfo_outline
|