Cable duct accessories complete in Wiring systems
Cable duct accessories complete from Niedax
 |
 Niedax LUWD60.060 E3 vertical corner 2x45° with cover 60x60mm stainless steel, without base.
Cable protection duct vertical corner 2x45°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential ...Lieske Part No.: 1316485 Mfg Part No: LUWD60.060E3 Type: LUWD 60.060 E3 |
259,54 EUR
 ≈ £222.69 | ≈ $295.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWD 60.100 vertical corner 2x45° with cover 60x100mm tape verz without bottom hole.
Cable protection duct vertical corner 2x45°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential ... Lieske Part No.: 1316473 Mfg Part No: LUWD60.100 Type: LUWD 60.100 |
204,82 EUR
≈ £175.74 | ≈ $233.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWD60.100E3 flat angle 90 DEGREES,
Cable protection duct vertical corner 2x45°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover occurs automatically when snapped on, accessories for potential ... Lieske Part No.: 821721 Mfg Part No: LUWD60.100E3 Type: LUWD 60.100 E3 |
280,06 EUR
≈ £240.29 | ≈ $318.71
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWD 60.200 vertical corner 2x45° with cover 60x200mm band-verz without bottom hole.
Cable protection duct vertical corner 2x45°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential ... Lieske Part No.: 1316486 Mfg Part No: LUWD60.200 Type: LUWD 60.200 |
286,71 EUR
≈ £246.00 | ≈ $326.28
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWD60.200E3 vertical corner 2x45° with cover 60x200mm stainless steel
Cable protection duct vertical corner 2x45°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover occurs automatically when snapped on, accessories for potential ... Lieske Part No.: 433351 Mfg Part No: LUWD60.200E3 Type: LUWD 60.200 E3 |
393,49 EUR
≈ £337.61 | ≈ $447.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWE60.060 Vertikaleckeinsatz ,
Cable protection duct vertical corner insert 90°, without cover, duct bottom part unperforated, guide the cover of the cable protection duct over the vertical corner insert, guide the cover of the ... Lieske Part No.: 801056 Mfg Part No: LUWE60.060 Type: LUWE 60.060 |
79,61 EUR
≈ £68.31 | ≈ $90.60
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWE60.100 Vertikaleckeinsatz LUWE 60,100,
NIEDAX - Make: LUWE 6th LS-Vertikaleckeinsatz 9 ø, unperforated for LS-channels, channel bottom, from strip galvanized steel according to DIN EN lead 346, cover the LS channel via the ... Lieske Part No.: 739529 Mfg Part No: LUWE60.100 Type: LUWE 60.100 |
89,30 EUR
≈ £76.62 | ≈ $101.62
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LUWE 60.200 vertical corner insert 90°, 60x200mm strip galvanized
Cable protection duct vertical corner insert 90°, without cover, duct bottom part unperforated, guide the cover of the cable protection duct over the vertical corner insert, guide the cover of the ... Lieske Part No.: 949955 Mfg Part No: LUWE60.200 Type: LUWE 60.200 |
112,29 EUR
≈ £96.34 | ≈ $127.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LZTP100 separator mounting plate, LZTP 100
NIEDAX - Make: LZTP 100 Separator mounting plate for vertical mounting of a separating web for dividing the interior of line protection channels and equipment ducts with 100 mm width, thickness: ... Lieske Part No.: 192092 Mfg Part No: LZTP100 Type: LZTP 100 |
76,19 EUR
≈ £65.37 | ≈ $86.70
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LZTP100E3 LS Trennstegbef. plate, stainless steel
Separation profile holder, with strain relief, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection ducts, can be used in the side parts of ... Lieske Part No.: 158216 Mfg Part No: LZTP100E3 Type: LZTP 100 E3 |
115,71 EUR
≈ £99.28 | ≈ $131.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LZTP150 LS-separator mounting plate, LZTP 150
NIEDAX - Make: LZTP 150 Separator mounting plate for vertical mounting of dividers for dividing the interior into line protection channels with 150 mm width, thickness: galvanized to DIN EN 10346, ... Lieske Part No.: 495263 Mfg Part No: LZTP150 Type: LZTP 150 |
101,65 EUR
≈ £87.22 | ≈ $115.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LZTP200 LS-barrier strip fastening plate,
NIEDAX - Make: LZTP 200 Separator mounting plate for vertical mounting of dividers for dividing the interior into line protection channels with 200 mm width, thickness: galvanized to DIN EN 10346, ... Lieske Part No.: 264281 Mfg Part No: LZTP200 Type: LZTP 200 |
112,10 EUR
≈ £96.18 | ≈ $127.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax LZTP200E3 LS Trennstegbef. plate, stainless steel
Separation profile holder, with strain relief, for the vertical installation of a separator and for dividing the interior of cable protection ducts, can be used in the base of the cable protection ... Lieske Part No.: 256032 Mfg Part No: LZTP200E3 Type: LZTP 200 E3 |
184,30 EUR
≈ £158.13 | ≈ $209.73
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PDAAR78C Ausseneckdeckel PDAAR78 *
Cover, for desk duct external corner base 90°, with continuous profile in the cover to accommodate the equipotential bonding bridge GPB 63-2, consisting of a right and a left cover section, visible ... Lieske Part No.: 506225 Mfg Part No: PDAAR78C Type: PDAAR 78 C |
48,83 EUR
≈ £41.90 | ≈ $55.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PDAS78C cover for desk channel outside corner 90° smooth powder-coated special version.
Cover, for desk duct external corner base section 90°, consisting of a right and a left cover section, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's ... Lieske Part No.: 449562 Mfg Part No: PDAS78C Type: PDAS 78 C |
49,21 EUR
≈ £42.22 | ≈ $56.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax PDIS78C Inneneckdeckel PDIS78 *
Cover, for desk duct inner corner base 90°, consisting of a right and a left cover part, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, including 2 ... Lieske Part No.: 949486 Mfg Part No: PDIS78C Type: PDIS 78 C |
49,21 EUR
≈ £42.22 | ≈ $56.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PDIS78R cover for desk channel inner corner 90° smooth powder-coated RAL9010
Cover for desk duct inner corner base 90°, consisting of a right and a left cover part, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, including 2 ... Lieske Part No.: 689072 Mfg Part No: PDIS78R Type: PDIS 78 R |
49,21 EUR
≈ £42.22 | ≈ $56.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PED120 C end cover for console channel H117mm D117mm
End cover for desk duct, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, potential equalization is carried out via the potential equalization cable ... Lieske Part No.: 367716 Mfg Part No: PED120C Type: PED 120 C |
37,24 EUR
≈ £31.95 | ≈ $42.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PED120R Endabschlussdeckel PED 120 R,
End cover for desk duct, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, potential equalization is carried out via the potential equalization cable ... Lieske Part No.: 824996 Mfg Part No: PED120R Type: PED 120 R |
37,24 EUR
≈ £31.95 | ≈ $42.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PGSK120 GK Sägekern PGSK 120,
NIEDAX - Make: PGSK 120 Sägekern, made of hard plastic, for console channels for easy tensioning of the console channel at the lower part on-site cutting. for console channel: PGU 120-78 ... Lieske Part No.: 326306 Mfg Part No: PGSK120 Type: PGSK 120 |
164,63 EUR
≈ £141.25 | ≈ $187.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PLA120-78C console channel outer corner PLA120-78 *,
Desk duct external corner base 90°, visible surfaces electrostatically powder-coated in RAL color according to manufacturer catalog, potential equalization is carried out via the inevitably ... Lieske Part No.: 502000 Mfg Part No: PLA120-78C Type: PLA 120-78 C |
324,43 EUR
≈ £278.36 | ≈ $369.20
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PLI120-78S console channel PLI120 Inner-78S,
Inner / Vertikaleck steel, galvanized, also available as a flat angle type: PLI 2 -78 S Quantity: ST. Lieske Part No.: 513517 Mfg Part No: PLI120-78S Type: PLI 120-78 S |
302,29 EUR
≈ £259.36 | ≈ $344.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax PSTE120-78 joint connector PSTE 120-78,
NIEDAX - Make: PSTE 2 -78 Joint connector for device channel and circuit-console channel, made of spring brass, the joint connector, connect the console channel bottoms electrically and ... Lieske Part No.: 808305 Mfg Part No: PSTE120-78 Type: PSTE 120-78 |
90,25 EUR
≈ £77.43 | ≈ $102.70
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax RKBA 5 edge protection tape 8x5.5 black with steel coating plastic
Edge protection tape with steel clamping tape, to protect cables from damage on metal and plastic cutting edges, contains halogen. The edge protection tape must be installed in personal danger areas! ... Lieske Part No.: 1327258 Mfg Part No: RKBA5 Type: RKBA 5 |
135,85 EUR
≈ £116.56 | ≈ $154.60
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|