Cable duct accessories complete in Wiring systems
Cable duct accessories complete from Niedax
 |
 Niedax RSSTAU108.300V RSSTAU 108.300 V Stütze asym.geschl.Rechteckrohr ungel.108x292mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ...Lieske Part No.: 690159 Mfg Part No: RSSTAU108.300V Type: RSSTAU 108.300 V |
97,91 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax RSSTAU108.400V RSSTAU 108.400 V Stütze asym.geschl.Rechteckrohr ungel.108x392mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690162 Mfg Part No: RSSTAU108.400V Type: RSSTAU 108.400 V |
107,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax RSSTAU108.600V RSSTAU 108.600 V Stütze asym.geschl.Rechteckrohr ungel.108x592mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690163 Mfg Part No: RSSTAU108.600V Type: RSSTAU 108.600 V |
118,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV110E2 Barrier strip connector ,
NIEDAX - Make: RTV E2 Barrier strip connector, made ​​of stainless steel, material .43 For the mechanical, electrical and positively aligned at the joint in the longitudinal ... Lieske Part No.: 819978 Mfg Part No: RTV110E2 |
111,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV60E2 Barrier strip connector RTV60ER,
Divider connectors for mechanical, electrical and longitudinally aligned connection of dividers at the joint. The connection is made by snapping the divider connectors into place at the joint. VDE ... Lieske Part No.: 579493 Mfg Part No: RTV60E2 Type: RTV 60 E2 |
81,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV85E2 RTV85 E2 Barrier strip connector,
Divider connectors for mechanical, electrical and longitudinally aligned connection of dividers at the joint. The connection is made by snapping the divider connectors into place at the joint. VDE ... Lieske Part No.: 818445 Mfg Part No: RTV85E2 Type: RTV 85 E2 |
96,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RW50 divider ,
NIEDAX - Make: RW 50 Separator, perforated for separation of cables of different voltages and functions, with edge protection, floor flange and continuously profiled for inclusion in soil or ... Lieske Part No.: 679574 Mfg Part No: RW50 |
54,05 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Niedax SDB300 Schalldämmblöcke SDB 300,
NIEDAX - Make: SDB 300 Schalldämmblöcke, for airborne sound insulation in wall penetrations, halogen free, flame retardant to DIN 4102, fire rating class B1, asbestos and mineral fibers. The ... Lieske Part No.: 327117 Mfg Part No: SDB300 |
49,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax SKM10X80F HEX,
Hexagon screw according to DIN EN ISO 4017, including toothed flange nut according to DIN EN 1661. The strength class of the screw is stamped on the screw head. Especially for connections that have to ... Lieske Part No.: 308005 Mfg Part No: SKM10X80F Type: SKM 10X80 F |
378,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax SKWHM150 protective cap pair H150mm plastic PVC-soft color yellow
Pair of protective caps to cover the ends of the wide span cable ladder. To ensure that the pair of protective caps can be fitted without any problems, a distance of at least 50 mm must be kept from ... Lieske Part No.: 468195 Mfg Part No: SKWHM150 Type: SKWHM 150 |
22,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH60 GK-RELEASE PROFILE BRACKET 60 TPH,
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection/industrial ducts, can be used in the side parts of the device ... Lieske Part No.: 233336 Mfg Part No: TPH60 Type: TPH 60 |
89,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH 60 E3 separation profile holder channel depth 59mm stainless steel
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection/industrial ducts, can be used in the side parts of the device ... Lieske Part No.: 606128 Mfg Part No: TPH60E3 Type: TPH 60 E3 |
130,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH80 GK-separation profile holder ,
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection ducts, can be used in the side parts of the device ducts or ... Lieske Part No.: 320610 Mfg Part No: TPH80 Type: TPH 80 |
105,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH 80 E3 dividing profile holder channel T78mm stainless steel
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection ducts, can be used in the side parts of the device ducts or ... Lieske Part No.: 318771 Mfg Part No: TPH80E3 Type: TPH 80 E3 |
135,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPK50 plastic divider TPK 50,
NIEDAX - Make: TPK 50 Divider, clip, plastic, for Gerätekänale with bottom flaps with 60 mm, 80 mm and 100 mm deep. VDE certified! Dimensions: Depth = 52 mm (Outer dimensions): folded edge = ... Lieske Part No.: 175712 Mfg Part No: TPK50 |
18,41 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS30 CUT STEEL BAR , GALVANIZED
Divider, for clipping into the base brackets and the joint connector of the device ducts as well as into the divider profile holder/divider retaining plate for cable protection ducts/energy columns, ... Lieske Part No.: 121997 Mfg Part No: TPS30 Type: TPS 30 |
125,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS50 Separator TPS 50, 11x50x2000mm zinc-plated
NIEDAX - Make: TPS 50 Divider, clip, from strip galvanized steel according to DIN EN 10346, for Gerätekänale with bottom flaps with 60 mm, 80 mm and 100 mm deep, and LS channels with 60 mm, 80 mm ... Lieske Part No.: 352420 Mfg Part No: TPS50 |
142,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS50E3 divider H11mm depth 50mm stainless steel
Divider, for clipping into the tabs of the separating profile holders for cable protection ducts, the potential equalization takes place automatically when clipped in. Use for: separating profile ... Lieske Part No.: 460983 Mfg Part No: TPS50E3 Type: TPS 50 E3 |
946,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax TPS60S TPS 60 S Trennsteg H11mm T 60mm L 1996mm Stahl bandverzinkt DIN E
Trennsteg, zum Einclipsen in die Bodenlaschen und den Stoßstellenverbinder der Gerätekanäle sowie in Trennprofilhalter für Leitungsschutzkanäle, der Potentialausgleich erfolgt automatisch beim ... Lieske Part No.: 838138 Mfg Part No: TPS60S Type: TPS 60 S |
14,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS70 divider 70 TPS steel, galvanized
NIEDAX - Make: TPS 70 divider, clip, from strip galvanized steel according to DIN EN 10346, for Gerätekänale with floor plates and 80 mm and 100 mm depth for LS-channels with 80 mm and 100 mm depth, ... Lieske Part No.: 635670 Mfg Part No: TPS70 |
166,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax TPS80S TPS 80 S Trennsteg H11mm T 80mm L 1996mm Stahl bandverzinkt DIN E
Trennsteg, zum Einclipsen in die Bodenlaschen und den Stoßstellenverbinder der Gerätekanäle sowie in Trennprofilhalter für Leitungsschutzkanäle, der Potentialausgleich erfolgt automatisch beim ... Lieske Part No.: 838134 Mfg Part No: TPS80S Type: TPS 80 S |
16,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS90 divider H11mm D90mm strip galvanized DIN EN 10346
Divider, for clipping into the base brackets and the joint connectors of the device ducts as well as into separating profile holders for cable protection ducts, the potential equalization is automatic ... Lieske Part No.: 407791 Mfg Part No: TPS90 Type: TPS 90 |
192,06 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS90E3 STEEL CUTTING BAR,
Divider, for clipping into the tabs of the separator profile holders for cable protection ducts, the potential equalization is automatic when clipped in. Use for: separator profile holder TPH ... LZTP ... Lieske Part No.: 272756 Mfg Part No: TPS90E3 Type: TPS 90 E3 |
1.079,10 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TS35T60 device channel adapter rail ,
Adapter rail, TS 35 hat profile, for device ducts with base lugs, for clipping into two base lugs, thereby automatically including in the potential equalization, for accommodating built-in components ... Lieske Part No.: 854933 Mfg Part No: TS35T60 Type: TS 35T60 |
66,33 EUR
plus delivery charges
Delivery time on requestinfo_outline
|