Wet.Protect protects against short circuits, failures and corrosion caused by moisture and humidity, penetrates the moisture and forms a permanent protective film, maintains conductivity and increases the service life of the treated parts, can be used preventively or for repairs directly after exposure to moisture. Only to be applied when the power is off. For use in industry, trade and private households. Version: e.basic, content 200 ml.
Lieske Part No.: 780281

Test aerosol for functional testing (simulation of smoke) of smoke detectors/switches.
Lieske Part No.: 958597

99% vegetable oils. Evaporates after assembly when used with our insulating hoses and insulating grommets. Non-discolouring. Available in a lightweight plastic bottle or canister. Hellerine is an effective assembly aid for pulling on hoses and grommets.
Lieske Part No.: 136316

Pen with moist fiber tip. Cleaning thermal transfer print heads. Small and handy. Precise cleaning. Ideal for lasers and sensors. Fits in every service case. SPOTCLEAN - the cleaning pen with high-purity isopropyl alcohol. The moist fiber tip loosens and removes dirt in one step. The pen enables precise cleaning and is therefore ideal for small surfaces such as lasers, head drums, print heads or sensors.
Sales unit: 25 pieces
Lieske Part No.: 553293

Cleans, lubricates and protects. Universally applicable. NSF K2 registration. Versatile combination of active ingredients. Eliminates all types of contact problems. Approved for food technology. KONTAKT 60 PLUS - the contact cleaner with additional protection. The oxide-dissolving contact cleaner in combination with a high-quality lubricating and protective oil ensures trouble-free operation of electrical devices even under the influence of the weather. Dissolves dirt and oxide layers, reduces plugging forces and protects.
Sales unit: 12 pieces
Lieske Part No.: 603600

High dissolving power. Special pistol spray head. Large 500 ml spray can with 95% active ingredient content. Cleans a wide range of dirt. Fast cleaning. High yield. KONTAKT LS - the effective circuit board rinse for electrical systems and devices. The quick cleaner is ideal for rinsing out control cabinets, devices, transformer systems and motors. KONTAKT LS is well compatible with electronic components and evaporates quickly and without leaving residue.
Sales unit: 12 pieces
Lieske Part No.: 857773

Rust remover with cold shock effect. Quickly and reliably loosens stuck and rusted screws, bolts, slides, etc. When cooled quickly to -40°C, the rust and dirt structure is broken up and the finest cracks appear. The capillary-active ingredients penetrate quickly and deeply - stuck parts can be loosened effortlessly. Acid and silicone free.
Sales unit: 12 pieces
Lieske Part No.: 860244

For effective cleaning, the particular combination of active ingredients to the contamination and the surface to be cleaned must be adjusted. CONTACT WL here is the universal electronics cleaner with balanced properties with respect to cleaning power, drying time and material compatibility. In addition, they adapted to specific applications cleaner sprays are available. Type: FLUID101 200ML Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 652657

Polyurethane varnish. Wide temperature range. With UV tracer. High chemical resistance. Can be used from -40 °C to +120 °C. Visual inspection of surface coverage. URETHAN 71 - the chemically cross-linked polyurethane-based protective varnish. After curing, the transparent insulating varnish has a high chemical resistance to solvents and aggressive vapors and protects circuit boards and surfaces even under extreme conditions.
Sales unit: 12 pieces
Lieske Part No.: 739308

Brake cleaner that has been tried and tested millions of times. Five active ingredients ensure quick cleaning of oil, grease, road grime and brake fluid. The most effective way to clean brakes, gears, engine parts, etc. without leaving residue. The spray is highly efficient thanks to a balanced dosing system.
Sales unit: 24 pieces
Lieske Part No.: 145635

Contact 60
The best contact cleaner for cars and corroded contacts. Eliminates contact resistance and voltage drop. (200 ml and 400 ml).

Type: KONTAKT60200ML
Quantity: 1 unit.
Lieske Part No.: 479249

Mild cleaning agent. Dries quickly and without leaving residue. Ideal for sensitive surfaces. Can also be used on magnetic cards or sensors. CLEANER 601 - the mild precision cleaner for electronics and precision mechanics. It is highly compatible with sensitive plastic or rubber surfaces and dries in seconds without leaving residue. It removes surface dirt from sensors, reflectors, magnetic cards, drives, etc.
Sales unit: 12 pieces
Lieske Part No.: 774942

Mild cleaning agent. Evaporates quickly and without leaving residue. High material compatibility. Can also be used on sensitive controls or rubber buttons. TUNER 600 - the precision cleaner for sensitive contact surfaces. The mild cleaning agent removes surface dirt from potentiometers, slide controls, push buttons or sensors. TUNER 600 can also be used on sensitive, graffiti-covered rubber buttons on remote controls and dries quickly and without leaving residue.
Sales unit: 12 pieces
Lieske Part No.: 933266

Powerful solvent mixture. Dries quickly and without residue. High yield. Removes oil, grease, soot, etc. High material compatibility. Low consumption. KONTAKT WL - the universal spray wash for all electronics. The solvent mixture removes a wide range of dirt such as oil, grease, soot or nicotine residues from electrical devices, plugs, motors or precision mechanical gears.
Lieske Part No.: 678279

For long-term reliability of systems and devices of protection of contact surfaces is necessary. In addition to protecting against moisture and corrosion must be considered in frequent plugging in the connectors fretting. Type: KONTAKTGOLD2000 Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 174009

Capillary-active fine oil. With high-pressure additives. High resistance to aging. Penetrates into every lubrication point. Highly resilient lubricating film. Free of silicone and acid, does not resinify. SPRAY OIL 88 - the capillary-active precision mechanics oil. The thin-bodied fine lubricating oil contains special additives to increase the pressure load capacity and resistance to aging. It lubricates and protects precision mechanics bearings, gears, springs, flaps, slides and locks. SPRAY OIL 88 is free of silicone and acid and does not resinify.
Lieske Part No.: 586374

Highly insulating silicone oil. High material compatibility. Highly concentrated. Eliminates insulation faults in coils. Also for rubber and plastics. High yield. SILICONE 72 - the highly insulating silicone oil with a high active ingredient content. The insulating oil is used to eliminate insulation faults on transformers and coils. In addition, it can be used as a water-resistant sliding and lubricating film for sensitive precision mechanical components.
Sales unit: 12 pieces
Lieske Part No.: 840068

PTFE lubricant and anti-adhesive agent. High material compatibility. Wide temperature range. Grease and oil-free, non-staining. Universally applicable. Can be used from -195 °C to +260 °C. KONTAFLON 85 - the grease-free PTFE-based lubricant and anti-adhesive agent. It forms a clean, thin lubricating and separating film that repels water, does not attract dirt and is temperature-resistant up to 260 °C. KONTAFLON 85 is used as a lubricant for plastic and cables, as a dry lubricant for drives or as a universal anti-adhesive agent.
Sales unit: 12 pieces
Lieske Part No.: 949846

Vaseline protective film. High material compatibility. Long-term protection for cable terminals, battery poles, copper tracks. Universally applicable. KONTAKT 701 - the high-purity contact grease based on Vaseline. It forms a greasy, soft Vaseline film that reliably protects cable terminals, screw connections, battery poles and copper tracks from moisture and corrosion. KONTAKT 701 is silicone and acid-free.
Sales unit: 12 pieces
Lieske Part No.: 862517

Special contact oil. Displaces moisture. Non-conductive protective film. For all types of contacts. Prevents short circuits. Protects against corrosion. Lubricating and protective oil for all types of contacts · Displaces and protects against moisture · Forms a microfine lubricating and sliding film · Protects systems and devices from malfunctionsKONTAKT 61 forms a wafer-thin oil film on contact surfaces that does not impede the flow of current. It prevents disruptive foreign layers, displaces moisture and reduces abrasion of the contact material when plugging in. The functional reliability of systems and devices in corrosive ambient conditions is increased.
Lieske Part No.: 782942

Transparent acrylic resin varnish. Highly insulating. Fast drying. Universally applicable. High dielectric strength. Hardens quickly. PLASTIK 70 - the universal protective and insulating varnish based on acrylic resin. The colorless-transparent varnish dries quickly, is highly insulating and can be used between -40 °C and +60 °C, and briefly up to 100 °C. PLASTIK 70 is used for the permanent protection of circuit boards against moisture, for re-insulating coils and as a universal clear varnish for all types of surfaces.
Sales unit: 12 pieces
Lieske Part No.: 105266

SK solder resist 10 is a solderable intermediate protective coating for printed circuit boards. It prevents cold solder joints, local overheating and protects against corrosion during intermediate storage. Type: solderable lacquer SK 10 200 ML 12 ST Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 458260

Without solvents. With antistatic effect. Stable active foam - does not run off even on vertical surfaces. Ideal for TFT and LCD. Reduced attraction of dirt. Removes all types of dirt. SCREEN TFT - the gentle special foam cleaner for TFT screens and LCD displays. The stable active foam does not contain any aggressive solvents such as alcohol, benzine or ammonia. SCREEN TFT is therefore ideal for gently cleaning screens on TVs, PCs, laptops, tablet PCs, smartphones, PDAs, camcorders or navigation systems.
Lieske Part No.: 679188

High cooling effect (up to max. -55 °C). Working under voltage is possible. Evaporates quickly and without residue. KÄLTE 75 SUPER contains an absolutely non-flammable cooling mixture with a particularly high cooling effect. The balanced dosing system prevents unnecessary splashing of the cooling mixture and ensures high efficiency.Cold sprays are ideal for cooling components and surfaces in a flash. This is used for thermal troubleshooting on electrical components, for functional testing of thermostats and temperature sensors, for simple climate tests or for shock freezing rubber, plastic or adhesive residues.According to safety testing, there is no risk of ignition or explosion even in the presence of ignition sources, so the cold spray can be used particularly for working under voltage and in explosion-protected areas.
Sales unit: 12 pieces
Lieske Part No.: 540761

Powerful foam cleaner. With antistatic effect. Stable active foam. Removes even heavy dirt. Reduced attraction of dirt. Does not run off. SCREEN 99 - the powerful glass and screen cleaner. The active foam contains highly effective solvents that quickly remove even heavier dirt. SCREEN 99 is ideal for streak-free cleaning of glass and plastic surfaces on screens, scanners, copiers, etc. The foam is stable and does not run off even on vertical surfaces.
Sales unit: 12 pieces
Lieske Part No.: 145354

Conductive liquid film. Ultra-thin and transparent. With cleaning alcohol. Reduces surface resistance. Invisible. Removes all types of dirt. ANTISTATIK 100 - forms an invisible protective film against electrostatic charge. The antistatic solution with cleaning alcohol removes dirt and offers long-lasting protection against static charge. ANTISTATIK 100 cleans and protects plastic housings, textile surfaces, screens, acrylic glass covers or packaging films.
Sales unit: 12 pieces
Lieske Part No.: 732602

High purity 99.7% isopropanol is used for residue-free cleaning of metal, glass or plastic surfaces. It is used to remove organic contaminants and lubricants resinified in precision engineering, used in the adhesive bonding of axles, shafts and pins, as well as housing for cleaning. Type: IPA CONTACT 200 ML Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 621268

High-quality multifunctional oil. High moisture displacement. Wide temperature range. Versatile. Eliminates contact problems. Can be used from -50 °C to +150 °C. KONTAKT 40 - the versatile multifunctional oil. The multipurpose oil has excellent water-displacing properties and eliminates moisture-related problems in ignition systems or plug connections. It lubricates tools, loosens screws and protects against rust. KONTAKT 40 is silicone-free and temperature-resistant up to 150 °C.
Sales unit: 12 pieces
Lieske Part No.: 233067

Cold 75
The approved an aid for Shrinking of bearings or the production of stretch-fit assemblies. Allows rapid localization of faulty components. Well suited for cold testing of thermal sensors in refrigeration and air conditioning systems. Available in two sizes (200 ml and 400 ml)

Type: KÄLTE75-200ML
Quantity: 1 unit.
Lieske Part No.: 342394

High proportion of purest zinc. Zinc dust paint according to EN 1461. Can be painted over. Long-term galvanic protection. Highest protective effect. Can be used as a primer. ZINK 62 is the zinc dust coating for the highest galvanic rust protection for iron and steel. The protective paint contains a high proportion of 98.5% purest zinc and thus forms a galvanically active corrosion protection coating according to EN ISO 1461:1999. ZINK 62 is quick-drying, temperature-resistant, weldable, paintable and has a matt gray color.
Lieske Part No.: 781595

Cleaning spray for quick and residue-free cleaning of inkjet, laser or dot matrix printers, fax machines or typewriters. Dissolves ink and paint residue from print heads, print cartridges, dot matrix print heads and type wheels. Removes old lubricants from printing mechanisms. Cleans dirty rubber rollers and housing surfaces.
Sales unit: 12 pieces
Lieske Part No.: 209560

Conductive graphite coating. Contains the finest graphite powder. Black anti-friction and release coating. Permanent antistatic protection. Surface resistance less than 2000 ohms. Versatile. GRAPHIT 33 - forms a black, conductive graphite coating. The conductive coating permanently reduces surface resistance to values less than 2000 ohms and also has good adhesion to plastics and rubber. GRAPHIT 33 is used for antistatic coating of plastic pipes, as a conductive release coating for high-voltage contacts and for repairing graphitized conductor layers.
Sales unit: 12 pieces
Lieske Part No.: 928112

Special formula. Integrated cleaning brush. Dries quickly and without residue. Also removes flux residue. Effective dirt removal. High material compatibility. KONTAKT LR - the highly effective cleaner for all types of circuit boards. The special formula in combination with the integrated cleaning brush quickly and effectively removes even resinous flux residue after soldering work. KONTAKT LR is compatible with common circuit board materials and labels.
Sales unit: 12 pieces
Lieske Part No.: 538875

Non-flammable. High dielectric strength. Dries quickly and without residue. High work safety. Can also be used under voltage. High material compatibility. CONTACT NB - the safety cleaner for electronics. The precision cleaner is non-flammable and non-conductive. This means that cleaning work can also be carried out on systems and devices that are under voltage. Expensive downtimes are avoided.
Sales unit: 12 pieces
Lieske Part No.: 985449

Contact 6 The best contact cleaner for cars and corroded contacts. Eliminates contact resistance and voltage drop. (2 ml and 4 ml). Type: KONTAKT6 4 ML item:
ST.
Lieske Part No.: 841407

For effective cleaning, the particular combination of active ingredients to the contamination and the surface to be cleaned must be adjusted. CONTACT WL here is the universal electronics cleaner with balanced properties with respect to cleaning power, drying time and material compatibility. In addition, they adapted to specific applications cleaner sprays are available. Type: VIDEO 90 400 ML 12 ST Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 444326

Powerful solvent mixture. Dries quickly and without residue. High yield. Removes oil, grease, soot, etc. High material compatibility. Low consumption. KONTAKT WL - the universal spray wash for all electronics. The solvent mixture removes a wide range of dirt such as oil, grease, soot or nicotine residues from electrical devices, plugs, motors or precision mechanical gears.
Sales unit: 12 pieces
Lieske Part No.: 310203

Transparent acrylic resin varnish. Highly insulating. Fast drying. Universally applicable. High dielectric strength. Hardens quickly. PLASTIK 70 - the universal protective and insulating varnish based on acrylic resin. The colorless-transparent varnish dries quickly, is highly insulating and can be used between -40 °C and +60 °C, and briefly up to 100 °C. PLASTIK 70 is used for the permanent protection of circuit boards against moisture, for re-insulating coils and as a universal clear varnish for all types of surfaces.
Sales unit: 12 pieces
Lieske Part No.: 557536

SK solder resist 10 is a solderable intermediate protective coating for printed circuit boards. It prevents cold solder joints, local overheating and protects against corrosion during intermediate storage. Type: solderable lacquer SK 10 400ML 12 ST Package: 12 PCS.
Sales unit: 12 pieces
Lieske Part No.: 349502

High cooling effect (up to max. -55 °C). Working under voltage is possible. Evaporates quickly and without residue. KÄLTE 75 SUPER contains an absolutely non-flammable cooling mixture with a particularly high cooling effect. The balanced dosing system prevents unnecessary splashing of the cooling mixture and ensures high efficiency.Cold sprays are ideal for cooling components and surfaces in a flash. This is used for thermal troubleshooting on electrical components, for functional testing of thermostats and temperature sensors, for simple climate tests or for shock freezing rubber, plastic or adhesive residues.According to safety testing, there is no risk of ignition or explosion even in the presence of ignition sources, so the cold spray can be used particularly for working under voltage and in explosion-protected areas.
Sales unit: 12 pieces
Lieske Part No.: 769388

Powerful foam cleaner. With antistatic effect. Stable active foam. Removes even heavy dirt. Reduced attraction of dirt. Does not run off. SCREEN 99 - the powerful glass and screen cleaner. The active foam contains highly effective solvents that quickly remove even heavier dirt. SCREEN 99 is ideal for streak-free cleaning of glass and plastic surfaces on screens, scanners, copiers, etc. The foam is stable and does not run off even on vertical surfaces.
Sales unit: 12 pieces
Lieske Part No.: 309655

Cold 75
The approved an aid for Shrinking of bearings or the production of stretch-fit assemblies. Allows rapid localization of faulty components. Well suited for cold testing of thermal sensors in refrigeration and air conditioning systems. Available in two sizes (200 ml and 400 ml)

Type: KÄLTE75-400ML
Quantity: 1 unit.
Lieske Part No.: 155147

Special formula. Integrated cleaning brush. Dries quickly and without residue. Also removes flux residue. Effective dirt removal. High material compatibility. KONTAKT LR - the highly effective cleaner for all types of circuit boards. The special formula in combination with the integrated cleaning brush quickly and effectively removes even resinous flux residue after soldering work. KONTAKT LR is compatible with common circuit board materials and labels.
Sales unit: 12 pieces
Lieske Part No.: 952360

ECO recipe. DVGW certified. Complies with DIN EN 14291. NSF P1 registered. Food technology approval.
Sales unit: 12 pieces
Lieske Part No.: 150853

Extra strong degreasing effect. Slow evaporation rate. Increased flash point (25 °C). Removes even stubborn dirt. Longer exposure time possible. Reduced risk of ignition. DEFEATER 65 - the special cleaner for stubborn dirt in electronics. The extra strong solvent mixture also removes resinous or baked-on dirt from motors, high-voltage switches, insulators or switchgear.
Sales unit: 12 pieces
Lieske Part No.: 697525

Highly pure, gentle special formula. Dries in seconds and without leaving residue. Removes dust, tape abrasion, oil or grease residue. Compatible with all video and sound heads and laser optics. VIDEO 90 is the special cleaner for magnetic heads and laser optics on video, audio and data storage devices.
Sales unit: 12 pieces
Lieske Part No.: 161945

Highly conductive copper paint. Increases immunity to interference. 50-70 dB shielding attenuation. Protects sensitive electronics. EMV 35 - the highly conductive shielding paint for plastic surfaces. The copper conductive paint protects against electromagnetic interference, increases the immunity to interference of electrical devices and prevents the emission of electromagnetic waves from electronic devices. EMV 35 is especially suitable for coating plastic housings of electrical systems and electronic devices.
Sales unit: 12 pieces
Lieske Part No.: 165423

Powerful cleaning fluid. With polishing effect. With antistatic effect. Effective dirt removal. Refreshes surfaces. Reduces the attraction of dirt. SURFACE 95 is the housing and surface cleaner with a polishing effect. It removes all types of dirt and evens out scratches and signs of wear on plastic and painted surfaces. The polishing effect creates a new shine. SURFACE 95 is ideal for cleaning and refreshing electronic housings, fittings and office equipment.
Sales unit: 12 pieces
Lieske Part No.: 711812

Type: 52055379
Sales unit: 1 pc
Lieske Part No.: 653899

Scotch (TM) Spray Program For Maintenance
Content: 400 ml
Format: Entfeuchtungsspray type: Scotch 1605
Sales Unit: 1 ST.
Sales unit: 6 pieces
Lieske Part No.: 776291