Identification cable ties made of polyamide 6.6. For easy identification and simultaneous bundling. Direct labeling on site or after processing (pins T82S-BK/T82R-RD). Large selection of matching labels for thermal transfer printing also available. These cable ties are suitable for time-saving labeling during and after the assembly of cable harnesses.
Sales unit: 1000 pieces
Lieske Part No.: 1581904

Type: IT
8FL PA66 BK
ST
ST.
Sales unit: 100 pieces
Lieske Part No.: 782827

Ribbon cable Self-adhesive holder, halogen-free
, the FKH-Series is available in four different sizes
available can with tape an d also
be attached to a M3 screw. By the
simple clip method, can the holder
quickly and easily open and close again.
's flexible wings provide gentle
attachment of the cable. Damage
be prevented. material properties: Material: Polyamide 6.6 High Impact Modified



Color: black
Operating temp. -40 ° C to +85 ° C, intermittent +105 ° C (for 500 h)
Design: For flat cables up to 25 mm Type: FKH25A-HIR-BK-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 140962

Mounting socket screw KR6 / 8, halogen-free
, the compact mounting base KR stands
out due to the pronounced curvature, the
safe guidance of cables and
allows cable harnesses. For cable tie widths
of 6 or 8 mm. Material: polyamide 6.6, color:
nature, temperature range: -40 ° C to +85 ° C
max cable ties. Width: 6.00 mm
Dimensions (L x W): 18 x 12 Type: KR6G5-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 678977

Mounting socket screw KR6 / 8, halogen-free KR The compact mounting base is characterized by the pronounced curvature, which allows secure management of cables and cable harnesses. For cable tie widths of 6 or 8 mm. Material: polyamide 6.6, color: nature, temperature range: -4 ° C to +85 ° C max cable ties. Width: 8 mm Dimensions (L x W): 25 x
4 Type: KR8G5-N66-NA-C

ST.
Sales unit: 100 pieces
Lieske Part No.: 805595

Self-adhesive base, halogen-free
for cable tie (T18R to T150R),
4 pages for threading cable ties width 3.6
to 7.8 mm
Material: Polyamide 6.6
Color: natural
Temperature range: -40 ° C to +85 ° C
max cable ties. Width: 7.8 mm
Dimensions (L x W): 38 x 38 Type: MB5A-N66-NA-C1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 614549

Type: AT1-N66-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 339440

Kennzeichnungsschilder und -pfeile zur Befestigung mit Kabelbindern. Beschriftung mittels Markierstift T82 oder Bestückung mit Ovalgrip. AT1 für 7 Ovalgrip-Kennzeichnungstüllen der Größe 50. AT2 für 8 Ovalgrip-Kennzeichnungstüllen der Größe 85. AT3 für 14 Ovalgrip-Kennzeichnungstüllen der Größe 85. Individuell bedruckte Schilder und Pfeile auf Anfrage erhältlich. Die Kennzeichnungsschilder und -plättchen eignen sich zur Kennzeichnung von Kabelbäumen, Leitungsbündeln und anderen Objekten vor und nach der Montage. Mit Kabelbindern in beliebigen Längen kann eine Befestigung am Bündelgut erfolgen.
Sales unit: 100 pieces
Lieske Part No.: 734497

Type: AT2-N66-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 339539

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 564369

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 1189953

Identification signs and arrows for fastening with cable ties. Labeling using a T82 marker pen or fitting with Ovalgrip. AT1 for 7 Ovalgrip identification grommets of size 50. AT2 for 8 Ovalgrip identification grommets of size 85. AT3 for 14 Ovalgrip identification grommets of size 85. Individually printed signs and arrows available on request. The identification signs and plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length can be used to attach the items to the bundle.
Sales unit: 100 pieces
Lieske Part No.: 381112

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cables and pipes before and after assembly. They can be used regardless of the size of the bundled goods, as they can be fastened with cable ties of any length (width up to 4.8 mm). Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series.
Sales unit: 100 pieces
Lieske Part No.: 592323

IT- und IMP-Plättchen zur Kennzeichnung von Kabeln und Rohren mit großen Durchmessern. Auch für die Kennzeichnung von ebenen Oberflächen. Beschriftung mit bedruckbaren Etiketten oder mit Markierstiften der Serie T82. Befestigung mit Kabelbindern oder Nieten. Individuell bedruckte Plättchen auf Anfrage erhältlich. Die IT- und IMP-Plättchen eignen sich für die Kennzeichnung von Kabelbäumen, Leitungsbündeln und anderen Objekten vor und nach der Montage. Mit Kabelbindern in beliebigen Längen (Breite bis 4,8 mm) kann eine Befestigung am Bündelgut erfolgen. Alternativ ist eine Fixierung mit Nieten möglich.Die Plättchen können manuell mit den Markierstiften der Reihe T82 beschriftet oder mit passenden Etiketten versehen werden.
Sales unit: 100 pieces
Lieske Part No.: 287293

Type: IMP2 PA66 NA 100 ST item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 165550

Type: IMP2.5-
9
PA66 NA
ST
ST.
Sales unit: 100 pieces
Lieske Part No.: 783424

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length (width up to 4.8 mm) can be used to fasten them to the bundled goods. Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series or provided with suitable labels.
Sales unit: 5000 pieces
Lieske Part No.: 362440

IT and IMP plates for marking cables and pipes with large diameters. Also for marking flat surfaces. Labeling with printable labels or with marker pens from the T82 series. Fastening with cable ties or rivets. Individually printed plates available on request. The IT and IMP plates are suitable for marking cable harnesses, cable bundles and other objects before and after assembly. Cable ties of any length (width up to 4.8 mm) can be used to fasten them to the bundled goods. Alternatively, fastening with rivets is possible. The plates can be labeled manually with the marker pens from the T82 series or provided with suitable labels.
Sales unit: 100 pieces
Lieske Part No.: 313110

Time-saving fastening solution. Base consists of two parts. Simply push into the fastening hole. Can be combined with cable ties of different widths. The TY5 wedge bases are used wherever efficient fastening and high fastening security are required, even under vibrations. The two-part wedge remains firmly anchored in the drill hole after insertion.
Sales unit: 100 pieces
Lieske Part No.: 490322

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 500 pieces
Lieske Part No.: 878084

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 632546

HP fastening clamps made of polyamide. Good temperature resistance and high load capacity. Available in various sizes. Can be used without cable ties. The HP plastic clamps are used in many industries for permanent or temporary cable fastenings. Their low weight makes the clamps particularly suitable for the aviation or automotive industries. They ensure that the overall weight is minimized while maintaining a strong fastening solution.
Sales unit: 1000 pieces
Lieske Part No.: 621935

Ideal for labelling RiteOn, HELASIGN, Arrowtag and the IMP plates. Also suitable for use on the marking binders. Very fast drying ink. Extremely UV resistant. Pack of 2 in red and black. The T82 marker pens are ideal for labelling a wide range of materials.
Lieske Part No.: 595559

Ideal for labelling RiteOn, HELASIGN, Arrowtag and the IMP plates. Also suitable for use on the marking binders. Very fast drying ink. Extremely UV resistant. Pack of 2 in red and black. The T82 marker pens are ideal for labelling a wide range of materials.
Lieske Part No.: 334512

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-A PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 295802

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-B PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 341517

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-C-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 672822

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-D PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 135610

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-E-PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 385863

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-F PVC YE-M4 Quantity: 1000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 656778

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
-3-G-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 966530

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion.Type: HG
-3-H-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 107278

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-I-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 203974

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-J-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 162509

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
-3-K PVC-YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 501824

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-L PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 156131

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-M-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 613868

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-N-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 666406

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-O-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 169130

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-P-PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 207331

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-Q-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 590519

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-R-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 654688

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-S-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 362541

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-T PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 699674

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG
3-U-PVC YE-M4 item:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 705768

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-V PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 588721

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-S-PVC-YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 272156

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-X-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 115427

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion.Type: HG
-3-Y PVC YE-M4 item:
ST.
Sales unit: 5000 pieces
Lieske Part No.: 842969

The Helagrip Wire markers are suitable for safe marking of cable and wire. They can easily slide on the wires. The spring force of the profile ensures a tight fit through the nose section on the right side character combinations can be strung together well and torsion. Type: HG1-3-Z-PVC YE-M4 Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 158320