High-quality cable lamination labels made of polyester. Ideal for labelling cables and lines in demanding environments. Very flexible and at the same time tear- and impact-resistant material. Excellent resistance to alcohol, petrol, cleaning solutions and hydraulic oils. Extremely temperature and UV resistant. Perforation allows the protective laminate to be shortened as required for smaller outer diameters. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. Rounded corners guarantee better final adhesion. The self-laminating labels are ideal for labelling hoses and lines that are exposed to adverse environments, such as in the hydraulics industry. Helatag 1232 consists of a white labelling field and an extremely durable protective laminate that protects the print from dust, dirt and mechanical wear.
Sales unit: 650 pieces
Lieske Part No.: 2058191

With its white label and the transparent protective laminate label is ideal for marking cables and wires. The material is pliable and allows even the identification of ribbon cables inside.The protective laminate is placed over the label area and protects it effectively from external influences such as moisture, dirt and mechanical abrasion. The label solution contributes to minimal and does not affect any neighboring markings or veins. For easy printing of labels, we recommend labeling software Tagprint Pro, and our thermal transfer printing system TT4000 + and TT420 +. Type: TAG2TD6-320-WHCL item: 5000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 679089

Quantity: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 813804

Cable laminating labels with a white labeling field. Extremely temperature and chemical resistant. UV and weather resistant - five years in a normal Central European climate. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. This cable laminating label was developed for special requirements for chemical resistance and for outdoor applications. It consists of a printable area and a protective laminate that protects the print from dust, dirt and mechanical wear. The label is used in particular for marking cables and lines in industry and military technology.
Sales unit: 5000 pieces
Lieske Part No.: 543665

Helatag 323 (Weiß-Transparent), für hohe Temperaturen, Artikelnummer: 596-06320

Eigenschaften:

Kabellaminieretiketten mit weißem Beschriftungsfeld
Äußerst temperaturbeständig
UV- und witterungsbeständig; 5 Jahre bei mitteleuropäischem Normalklima
Hervorragender Schutz gegenüber Feuchtigkeit und mechanischem Abrieb durch das Schutzlaminat
Farbband TT932DOUT für hervorragende Druckqualität
Optimale Ergebnisse mit den Druckersystemen TT4000+ und TT430
Professionelle Etikettengestaltung mit der Software TagPrint Pro
Gelb und weitere Farben auf Anfrage erhältlich



Anwendung
Für besondere Anforderungen an chemische Beständigkeit sowie für Anwendungen im Außeneinsatz wurde dieses Kabellaminieretikett entwickelt. Es wird insbesondere zur Kennzeichnung von Kabeln und Leitungen in der Industrie sowie Militärtechnik verwendet.
Helatag 323 (Weiß-Transparent), für hohe Temperaturen ist für folgende Industrie-Branchen geeignet

Windkraftanlagen
Schienenfahrzeugbau
Elektrogroßhandel
Verteidigungsindustrie
Sales unit: 500 pieces
Lieske Part No.: 813813

High-quality cable lamination labels. Suitable for labeling cables and wires. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. Rounded edges offer additional holding power. Other colors available on request. Thermal transfer labels from HellermannTyton guarantee that the labels are easy to read and also offer high levels of durability and abrasion resistance. Our materials and ribbons have been optimally adapted to the needs and requirements of industries and customers. For trouble-free printing of the labels, we recommend our printer systems, ribbons and the TagPrint Pro software.
Sales unit: 500 pieces
Lieske Part No.: 2112893

Cable laminating labels with a white labeling field. Extremely temperature and chemical resistant. UV and weather resistant - five years in a normal Central European climate. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. This cable laminating label was developed for special requirements for chemical resistance and for outdoor applications. It consists of a printable area and a protective laminate that protects the print from dust, dirt and mechanical wear. The label is used in particular for marking cables and lines in industry and military technology.
Sales unit: 2500 pieces
Lieske Part No.: 556683

Cable laminating labels with a white labeling field. Extremely temperature and chemical resistant. UV and weather resistant - five years in a normal Central European climate. Excellent protection against moisture and mechanical abrasion thanks to the protective laminate. This cable laminating label was developed for special requirements for chemical resistance and for outdoor applications. It consists of a printable area and a protective laminate that protects the print from dust, dirt and mechanical wear. The label is used in particular for marking cables and lines in industry and military technology.
Sales unit: 1000 pieces
Lieske Part No.: 455776

With its white label and the transparent protective laminate label is ideal for marking cables and wires. The material is pliable and allows even the identification of ribbon cables inside. The protective laminate is placed over the label area and protects it effectively from external influences such as moisture, dirt and mechanical abrasion. The label solution contributes to minimal and does not affect any neighboring markings or veins. For easy printing of labels, we recommend labeling software Tagprint Pro, and our thermal transfer printing system TT4000 + and TT420 +. Type: TAG107TD3-323-WHCL item: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 213458

Type: TAG20-08TE-1211-YE

Lieske Part No.: 432764

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 575572

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 840215

Helatag 1204 (Silber), Artikelnummer: 596-12045

Eigenschaften:

Kennzeichnungsetiketten aus Polyester
Ersetzen aufwendige Aluminiumschilder
Für ebene und glatte Oberflächen
Auch für kritische Untergründe wie Kunststoffe und Lacke
Ideal für die Kennzeichnung in Bereichen mit hohen Temperaturen
Bedruckbar mit Texten, Grafiken und Barcodes
Farbband TT822OUT für hervorragende Druckqualität
Optimale Ergebnisse mit den Druckersystemen TT4000+ und TT430
Professionelle Etikettengestaltung mit der Software TagPrint Pro



Anwendung
Die Etiketten eignen sich besonders für die Herstellung von individuellen, wisch- und kratzfesten Typenschildern für industrielle Anwendungen. Der verwendete Klebstoff kann auch auf kritischen Untergründen eingesetzt werden.
Zum problemlosen Bedrucken der Etiketten empfehlen wir unsere Druckersysteme sowie die Etikettensoftware TagPrint Pro.
Helatag 1204 (Silber) ist für folgende Industrie-Branchen geeignet

Windkraftanlagen
Schienenfahrzeugbau
Automobilindustrie
Elektrogroßhandel
Verteidigungsindustrie
Lieske Part No.: 605743

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 2 pieces
Lieske Part No.: 575576

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 575386

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 2068267

Type: TAG63TD1-1204 1204 SR 1 RO

Sales unit: 12 pieces
Lieske Part No.: 655582

Type: TAG64TD1-1204-SR

Lieske Part No.: 899273

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 1438877

These labels are particularly suitable for permanent identification on flat surfaces for production equipment or IT devices. The range includes a wide range of label sizes. Unique identification is given by digital printing with serial numbers or barcodes.
Type: TAG67TD2-1204-SR

Lieske Part No.: 629067

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 577007

Helatag 1204 (Silber), Artikelnummer: 596-12072

Eigenschaften:

Kennzeichnungsetiketten aus Polyester
Ersetzen aufwendige Aluminiumschilder
Für ebene und glatte Oberflächen
Auch für kritische Untergründe wie Kunststoffe und Lacke
Ideal für die Kennzeichnung in Bereichen mit hohen Temperaturen
Bedruckbar mit Texten, Grafiken und Barcodes
Farbband TT822OUT für hervorragende Druckqualität
Optimale Ergebnisse mit den Druckersystemen TT4000+ und TT430
Professionelle Etikettengestaltung mit der Software TagPrint Pro



Anwendung
Die Etiketten eignen sich besonders für die Herstellung von individuellen, wisch- und kratzfesten Typenschildern für industrielle Anwendungen. Der verwendete Klebstoff kann auch auf kritischen Untergründen eingesetzt werden.
Zum problemlosen Bedrucken der Etiketten empfehlen wir unsere Druckersysteme sowie die Etikettensoftware TagPrint Pro.
Helatag 1204 (Silber) ist für folgende Industrie-Branchen geeignet

Windkraftanlagen
Schienenfahrzeugbau
Automobilindustrie
Elektrogroßhandel
Verteidigungsindustrie
Sales unit: 4 pieces
Lieske Part No.: 930501

These labels are particularly suitable for permanent identification on flat surfaces for production equipment or IT devices. The range includes a wide range of label sizes. Unique identification is given by digital printing with serial numbers or barcodes.
Type: TAG76TD1-1204-SR

Lieske Part No.: 865144

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 1773497

Suitable for the permanent labeling of control cabinets. Excellent contrast of the print thanks to white label material. Also for use on critical surfaces. Rounded corners guarantee better final adhesion. These labels are suitable for the permanent labeling and identification of components and cables in the electrical industry as well as for the labeling of systems. They can also be used optimally when setting up and installing, but also when repairing and expanding control cabinets and control units. We recommend our printing systems, ink ribbons and label software for easy printing of the labels.
Lieske Part No.: 1893325

Type: TAG08-15TC-1216-WH 1210 WH 1 RO item: 1 ST.
Lieske Part No.: 416266

Type: TAG73TD1-1210-WH

Lieske Part No.: 999132

Type: TAG76TD1-1210-WH

Sales unit: 4 pieces
Lieske Part No.: 985239

Supple vinyl material for rough or curved surfaces. The labels are ideal for equipment, inventory and logistics labeling of stressed load carriers. The material is ideal for use on rough or curved surfaces. The high contrast means that printed barcodes are easily recognized.
Lieske Part No.: 1259965

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 525937

The thermal transfer printing provides a very detailed picture of graphics, special characters or bar codes. With the Helatag® labels offer the choice for smear-resistant, ultraviolet-resistant and chemical-resistant marking. Type: TAG108TD1-1213-YE 1213 YE 1 RO item: 1 ST.
Sales unit: 2 pieces
Lieske Part No.: 152480

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Lieske Part No.: 525941

For a very clear and permanent identification of storage facilities such as storage aisles and professional levels with barcode and technical information with appropriate signal effect, the solid-colored vinyl material offers. It can thus be generated in production halls and individual warnings and warning signs and position markings of production equipment and other facilities. The material is flexible and can also be mounted on rough surfaces such as welds easily. This material is supplied as a continuous product and can after printing are cut to length either automatically with the cutter or by hand. For production of labels, we recommend our TT420 + printers and TT4000 + and label software Tagprint Pro. Quantity: 1 ST.
Lieske Part No.: 525942

For a very clear and permanent marking of storage systems such as warehouse aisles and shelf levels with barcode and multiple entries with corresponding signal effect, the solid colored vinyl material offers. It can thus be produced in factories and individual warnings and warning labels and position markings of production machinery and other facilities. The material is flexible and can be mounted on rough surfaces such as welds problems. This material is supplied as a continuous product and after printing are cut to length, either automatically with the cutter or by hand. For problem-free printing, we recommend our TT420 + printers and TT4000 + and label software Tagprint Pro. Type: TAGR1TD-1213-GN 1213 GN 1 RO item: 1 ST.
Lieske Part No.: 718679

Type: TAGR1TD-1213-WH 1213 WH 1 RO

Lieske Part No.: 921098

Geeignet zur Kennzeichnung von Schaltschränken. Für Anwendungen wo hoher Kontrast und Sichtbarkeit des Etiketts gewünscht wird. Zur dauerhaften und temporären Kennzeichnung. Rückstandsfrei wiederablösbar. Auch für raue und strukturierte Oberflächen. Die Etiketten Typ 880 sind für die Kennzeichnung und Identifizierung von Baugruppen und Leitungen geeignet. Optimal können diese zudem beim Aufbau und Einrichten, aber auch bei der Reparatur und Erweiterung von Schaltschränken und Steuerungseinheiten eingesetzt werden. Durch die flexible Struktur des Vinyls sind sie zudem für rauere Untergründe geeignet.
Lieske Part No.: 784448

Geeignet zur Kennzeichnung von Schaltschränken. Für Anwendungen wo hoher Kontrast und Sichtbarkeit des Etiketts gewünscht wird. Zur dauerhaften und temporären Kennzeichnung. Rückstandsfrei wiederablösbar. Auch für raue und strukturierte Oberflächen. Die Etiketten Typ 880 sind für die Kennzeichnung und Identifizierung von Baugruppen und Leitungen geeignet. Optimal können diese zudem beim Aufbau und Einrichten, aber auch bei der Reparatur und Erweiterung von Schaltschränken und Steuerungseinheiten eingesetzt werden. Durch die flexible Struktur des Vinyls sind sie zudem für rauere Untergründe geeignet.
Lieske Part No.: 770115

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 992613

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 1588173

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 100 meters
Lieske Part No.: 2115642

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1335872

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1129276

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1335871

Abmessungen passend für Kennzeichnungsbinder der IT-Serie sowie der IT-/IMP-Plättchen. Auch zur dauerhaften Beschriftung von Bauteilen und Geräten auf unterschiedlichsten Untergründen geeignet. Für gewölbte Oberflächen geeignet. Weiße Etiketten für exzellenten Kontrast des Druckbildes. Die Etiketten sind speziell auf die Größen der IT-Kennzeichnungsbinderreihe und IT-/IMP-Plättchen abgestimmt. Das flexible Material ermöglicht eine besonders starke Klebekraft auf den Plättchen oder Kabelbindern. Beste Druckresultate werden mit den HellermannTyton Thermotransferdruckern erzielt. Mit dieser Lösung wird eine professionelle Kennzeichnung von Schläuchen, Rohren, Kabeln und anderen Bauteilen erreicht.
Sales unit: 2 pieces
Lieske Part No.: 615695

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 125103

Ideal für die Kennzeichnung in Bereichen mit hohen Temperaturen (bis +150 °C). Für die Anwendung auf ebenen und glatten Flächen. Chemikalienresistente Polyesterfolie. Zur dauerhaften und alterungsbeständigen Kennzeichnung. Hochwertiges Material für gestochen scharfe Texte und Barcodes. Die Etiketten eignen sich besonders für die Herstellung von individuellen, wisch- und kratzfesten Typenschildern für industrielle Anwendungen. Dank der hohen Temperaturbeständigkeit bieten sie eine Vielzahl von Einsatzmöglichkeiten auf ebenen Flächen, wie bei der Geräte-, Inventar- sowie Logistikkennzeichnung von beanspruchten Ladungsträgern. Der verwendete Klebstoff kann auch auf kritischen Untergründen eingesetzt werden. Zum problemlosen Bedrucken der Etiketten empfehlen wir unsere Drucksysteme sowie die Etikettensoftware TagPrint Pro.
Lieske Part No.: 286232

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 577008

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 577009

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 6 pieces
Lieske Part No.: 1323896

These labels are particularly suitable for permanent identification on flat surfaces for production equipment or IT devices. The range includes a wide range of label sizes. Unique identification is given by digital printing with serial numbers or barcodes.
Type: TAG31TD3-1206 1206 WH 1 RO

Lieske Part No.: 133047