Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 150454

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057579

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057580

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 137362

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1872406

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057581

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344609

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344608

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344607

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346800

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346799

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346798

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057582

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 171435

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873093

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873094

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873095

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873096

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 2058390

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057583

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057584

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057585

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057586

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057587

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346809

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346796

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 137365

Schnelle und einfache Verwendung vorbedruckter Kabelmarkierer. Aufklickbar. Ideal zur nachträglichen Montage oder für Wartungs- und Reparaturarbeiten. Perfekte Ausrichtung der Zeichenkombinationen durch Einrasten der angrenzenden Markierer. Auch bei Vibrationen fester Sitz durch hohe Materialspannung. WIC Tool für alle vier Größen einsetzbar. Bestückung des Werkzeugs mit bis zu 20 Markierern. Erhältlich in der Farbe Gelb und in den Farben des internationalen Widerstandsfarbcodes. Weitere Farben auf Anfrage. 2-stellige Markierungen wie L1, L2, L3 und PE verfügbar. Farbe des Trägers der Markierer gibt Auskunft über den Typ: WIC0 (grün), WIC1 (rot), WIC2 (blau), WIC3 (gelb). Zubehörteile zur Kennzeichnung von Kabeln von 6 mm² bis 25 mm² (WICA-AC10-25) und bis zu 95 mm² (WICA-ACT-BK) erhältlich. WIC-Markierer werden durch simples Aufdrücken mit dem ergonomisch entwickelten WIC Tool oder - sofern kein Werkzeug verfügbar ist - einfach per Hand auf das Kabel appliziert. Einfach die Markierer in das Werkzeug einführen, den ersten Markierer auf das Kabel drücken, drehen und den nächsten Markierer aufbringen. Sobald alle Markierer auf dem Kabel appliziert sind, werden diese zusammengeschoben, bis die Verriegelung einrastet. Für die Kennzeichnung von Glasfaserkabeln ist die manuelle Applikation empfohlen.Größere Kabeldurchmesser (6 mm² bis 95 mm²) können mithilfe der WIC-Zubehörteile WICA gekennzeichnet werden. Passend hierauf sind die Größen WIC0, WIC1 und WIC2 abgestimmt. Verkaufseinheit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 687531

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 667374

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1987858

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 115153

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 633251

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 144293

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 941559

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 410635

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 925430

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 857111

Type: WIC1-H-PA-YE-T1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 595938

Type: WIC1-I-PA-YE-T1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 465330

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 520944

WIC (R) Kennzeichnungsmarkierer
The WIC (R) Kennzeichnungsmarkierer are particularly suitable for after-
träglichen mounting on cables. It is installed by
simply clicking them using tools.
The high voltage of the marker material is firmly attached to cables.
Especially suitable for cabinet and power plant construction.
The assortments are included tool For: WIC1, WIC2 = 200 pieces WIC3 = 100 pieces Material: Polyamide 6.6 International resistor color code and





yellow
Operating temperature: -40 ° C to +85 ° C, short term up to +105 ° C
Flammability: Self-extinguishing according to UL 94 V0
Pipe diameter: Ø 2.0 - 2.8 mm, cross section from 05 to 1.5 mm ²
Version: Length 4 , 8 Type: WIC1-0-9-PA-YE-T1


Sales Unit: 1000 ST.
Sales unit: 1000 pieces
Lieske Part No.: 618530

Type: WIC1-J-PA-YE-T1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 537023

Type: WIC1-K-PA-YE-T1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 469838

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 2 markers on. Type: WIC
L-PA-YE-T
Sales unit:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 930927

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 665223

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 785073

Type: WIC1-O-PA-YE-T1
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 245040

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 594080

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables.The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 2 markers on. Type: WIC
-Q-PA-YE-T
Sales unit:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 996970

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 797635