Sales Unit: 1 ST.
Lieske Part No.: 317304

Sales Unit: 1 ST.
Sales unit: 5 pieces
Lieske Part No.: 317265

Sales Unit: 1 ST.
Lieske Part No.: 317205

Sales Unit: 1 ST.
Lieske Part No.: 317319

TIPTAG - Tiptags with low fire risk, halogen-free, item number: 556-21069
Properties:
TIPTAG HF are identification tags with low fire risk
Printing with thermal transfer or laser marking
Delivered on a roll, perforated
Available in the colors white, yellow, blue or red
Simple label design with TagPrint Pro
Special sizes and colors on request
Application
TIPTAG HF is used to mark cables and lines in security areas with fire protection requirements, such as: B. public buildings (including airports, hospitals) and means of transport (including rail vehicles, ships, aircraft) as well as tunnel construction. The material is halogen-free and has low smoke spread, density and toxicity. TIPTAG HF are identification labels that are delivered on handy rolls. TIPTAG HF can be processed with a binder width of up to 4.7 mm.
Printer: TT4000+ and TT430
Ribbon: TTDTHOUT
Software: TagPrint Pro
TIPTAG - Tiptags with low fire risk, halogen-free is suitable for the following industrial sectors:
solar systems,
wind turbines,
rail vehicle construction,
electrical wholesale
, shipbuilding
, defense industry
Lieske Part No.: 317315

Sales Unit: 1 ST.
Lieske Part No.: 317313

TIPTAG - Tiptags with low fire risk, halogen-free, item number: 556-21079
Properties:
TIPTAG HF are identification tags with low fire risk
Printing with thermal transfer or laser marking
Delivered on a roll, perforated
Available in the colors white, yellow, blue or red
Simple label design with TagPrint Pro
Special sizes and colors on request
Application
TIPTAG HF is used to mark cables and lines in security areas with fire protection requirements, such as: B. public buildings (including airports, hospitals) and means of transport (including rail vehicles, ships, aircraft) as well as tunnel construction. The material is halogen-free and has low smoke spread, density and toxicity. TIPTAG HF are identification labels that are delivered on handy rolls. TIPTAG HF can be processed with a binder width of up to 4.7 mm.
Printer: TT4000+ and TT430
Ribbon: TTDTHOUT
Software: TagPrint Pro
TIPTAG - Tiptags with low fire risk, halogen-free is suitable for the following industrial sectors:
solar systems,
wind turbines,
rail vehicle construction,
electrical wholesale
, shipbuilding
, defense industry
Lieske Part No.: 317309

Sales Unit: 1 ST.
Lieske Part No.: 795067

Sales Unit: 1 ST.
Lieske Part No.: 795071

Sales Unit: 1 ST.
Lieske Part No.: 352056

Type: TTAGPU15X65YE PUR YE 1 RO
Sales unit: 1 pc
Lieske Part No.: 855268

Sales Unit: 1 ST.
Lieske Part No.: 521723

Sales Unit: 1 ST.
Lieske Part No.: 521801

Sales Unit: 1 ST.
Sales unit: 5 pieces
Lieske Part No.: 521920

Sales Unit: 1 ST.
Lieske Part No.: 521950

Detectable identification labels with metal content. Metal content approx. 14%. Temperature resistant. Can be printed with a thermal transfer printer. Supplied on a roll, perforated. Special colors on request. TIPTAG MC are printable and detectable identification labels made of metal-containing polyolefin that were specially developed for labeling cables and lines in the food and pharmaceutical industries. The material is detectable due to the metal content and can therefore be used safely. The identification labels are supplied on handy rolls and can be processed with a binder width of up to 4.7 mm. The material is ideal for printing with HellermannTyton's thermal transfer printers.
Sales unit: 950 pieces
Lieske Part No.: 1344610

Detectable identification labels with metal content. Metal content approx. 14%. Temperature resistant. Can be printed with a thermal transfer printer. Supplied on a roll, perforated. Special colors on request. TIPTAG MC are printable and detectable identification labels made of metal-containing polyolefin that were specially developed for labeling cables and lines in the food and pharmaceutical industries. The material is detectable due to the metal content and can therefore be used safely. The identification labels are supplied on handy rolls and can be processed with a binder width of up to 4.7 mm. The material is ideal for printing with HellermannTyton's thermal transfer printers.
Sales unit: 600 pieces
Lieske Part No.: 2058387

Detectable identification labels with metal content. Metal content approx. 14%. Temperature resistant. Can be printed with a thermal transfer printer. Supplied on a roll, perforated. Special colors on request. TIPTAG MC are printable and detectable identification labels made of metal-containing polyolefin that were specially developed for labeling cables and lines in the food and pharmaceutical industries. The material is detectable due to the metal content and can therefore be used safely. The identification labels are supplied on handy rolls and can be processed with a binder width of up to 4.7 mm. The material is ideal for printing with HellermannTyton's thermal transfer printers.
Sales unit: 760 pieces
Lieske Part No.: 2058388

Detectable identification labels with metal content. Metal content approx. 14%. Temperature resistant. Can be printed with a thermal transfer printer. Supplied on a roll, perforated. Special colors on request. TIPTAG MC are printable and detectable identification labels made of metal-containing polyolefin that were specially developed for labeling cables and lines in the food and pharmaceutical industries. The material is detectable due to the metal content and can therefore be used safely. The identification labels are supplied on handy rolls and can be processed with a binder width of up to 4.7 mm. The material is ideal for printing with HellermannTyton's thermal transfer printers.
Sales unit: 1920 pieces
Lieske Part No.: 2058389

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837258

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837259

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837260

Verwendung ohne Kabelbinder. Kosten- und Zeitersparnis. Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Lieferung in praktischen, wiederverschließbaren Kartons. TAGPU LOOP sind bedruckbare Kennzeichnungsschilder zur Markierung von Leitungen und Kabeln ohne Verwendung eines Kabelbinders. Sie werden auf Kabel und Leitungen von 2,8 mm bis 8 mm geschlauft, an denen eine dauerhaft lesbare und UV-beständige Markierung erforderlich ist. Die Kabelmarkierer bestehen aus flexiblem und widerstandsfähigem Polyurethan und eignen sich besonders für raue Umgebungen. Da TAGPU in einem praktischen Leiterformat geliefert wird, eignet es sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer einfach bedrucken, herausnehmen und an ein Kabel einschlaufen.Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems. Verkaufseinheit: 500 ST.
Sales unit: 500 pieces
Lieske Part No.: 837261

TAGLF are identification labels with a low fire hazard. Halogen-free. Low smoke spread, density and toxicity. High oxygen index. For larger cables, lines and cable bundles. Can be printed with thermal transfer and laser printers. Available in various colors. Special colors on request. Delivered in practical, resealable boxes. TAGLF is used to label cables and lines in safety areas with fire protection requirements, such as in public buildings (airports, hospitals) and means of transport (rail vehicles, ships, aircraft) and tunnels. The material is halogen-free and has low smoke spread, density and toxicity. TAGLF are identification labels that are supplied in a practical ladder format. The prefabricated format allows for easy printing and easy and quick removal of any marker. The labels can be processed with cable ties with a maximum width of 4.7 mm. For optimal printing results, we recommend using our thermal transfer printers and ribbons or a laser beam system.
Sales unit: 1000 pieces
Lieske Part No.: 1893610

TAGLF are identification labels with a low fire hazard. Halogen-free. Low smoke spread, density and toxicity. High oxygen index. For larger cables, lines and cable bundles. Can be printed with thermal transfer and laser printers. Available in various colors. Special colors on request. Delivered in practical, resealable boxes. TAGLF is used to label cables and lines in safety areas with fire protection requirements, such as in public buildings (airports, hospitals) and means of transport (rail vehicles, ships, aircraft) and tunnels. The material is halogen-free and has low smoke spread, density and toxicity. TAGLF are identification labels that are supplied in a practical ladder format. The prefabricated format allows for easy printing and easy and quick removal of any marker. The labels can be processed with cable ties with a maximum width of 4.7 mm. For optimal printing results, we recommend using our thermal transfer printers and ribbons or a laser beam system.
Sales unit: 2000 pieces
Lieske Part No.: 1893493

WIC (R) Kennzeichnungsmarkierer
Kennzeichnungsmarkierer for subsequent mounting on cables. Special applications are in mechanical and electrical cabinets. The unique design of the marker keeps twisting and tight on the cable. The tool is suitable for all three sizes. The Markirer are available in yellow, as well as in international resistor color code. For more ordering information, please contact your DEHA electrical wholesale partner.
execution: For WIC 1 to 3 baths Type: WICTOOL


Quantity: 1 unit.
Sales unit: 5 pieces
Lieske Part No.: 125040

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057577

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057578

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 150454

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057579

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057580

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 137362

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1872406

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057581

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344609

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344608

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1344607

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346800

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346799

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1346798

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057582

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 171435

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873093

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873094

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873095

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1873096

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 2058390

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057583

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057584

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 1000 pieces
Lieske Part No.: 1057585