plus marker type PS-06 in white with black print Q. These markers are suitable for cable outer diameters of 2.6 to 3.5mm and cable cross-sections of 1 to 1.5mm². The material of the cable markers is POM. The color of the support rods is
Lieske Part No.: 976756

plus marker type PS-06 in white with black U print. These markers are suitable for cable outer diameters of 2.6 to 3.5mm and cable cross-sections of 1 to 1.5mm². The material of the cable markers is POM. The color of the support rods is
Lieske Part No.: 135675

plus marker type PS-06 in white with black imprint V. These markers are suitable for cable outer diameters of 2.6 to 3.5mm and cable cross-sections of 1 to 1.5mm². The material of the cable markers is POM. The color of the support rods is
Lieske Part No.: 135676

plus marker type PS-06 in white with black print W. These markers are suitable for cable outer diameters of 2.6 to 3.5mm and cable cross-sections of 1 to 1.5mm². The material of the cable markers is POM. The color of the support rods is
Lieske Part No.: 135678

The product is a cable marker from the brand Ses-Sterling, model Pliosnap+ PS-09 1 white, specifically designed for labeling cables in electrical and IT installations. It enables clear identification of cables with an outer diameter between 3.2 and 4.5 mm and a cable cross-section of 2.5 mm². The markers are white with black printed labeling "2,5 cm ( 1 inch ) and are made of POM (Polyoxymethylene), a durable, wear-resistant plastic known for high mechanical strength and chemical resistance. The carrier rods, on which the markers are mounted, are blue and can be purchased empty, allowing for flexible use.

Applications
This marker is suitable for use in industrial electrical installations, building automation, and IT infrastructures where clear and permanent cable labeling is required. It is particularly used in systems with medium to high cable diameters, where secure fastening and good readability of the label are essential. The use of POM ensures high resistance to mechanical stress, as encountered during installation or operation.

Functions and Features in Detail
The markers are of type Pliosnap+ PS-09, indicating a self-closing, clamping system that can be installed without tools and without cutting the cable. The label "2,5 cm ( 1 inch ) is printed in black on the white carrier, ensuring good readability even in low light conditions. The markers are designed for cables with an outer diameter of 3.2 to 4.5 mm, corresponding to a typical cable cross-section of 2.5 mm². The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers, enabling efficient handling and storage.

Technology Explained Simply
The material POM (Polyoxymethylene) is characterized by high strength, low friction, and good heat resistance. It is resistant to many chemicals, making it suitable for industrial environments. The self-closing design allows for quick and secure installation without additional tools. The blue carrier rods serve as storage and transport units and can be purchased empty as an option, enabling individual loading.

Compatibility and Accessories
The markers are specifically designed for cables with an outer diameter of 3.2 to 4.5 mm, matching cables with a cross-section of 2.5 mm². The carrier rods are blue and can be purchased empty, allowing for flexible use. No information is available regarding specific accessories or alternative markers, so no further compatibility details are provided.

Installation and Mounting
Installation is done by simply sliding the marker over the cable and then closing the self-clamping mechanism. No tools are required, and the cable is not damaged. The markers are designed for permanent attachment and remain secure even under mechanical stress, such as during cable routing or operation.

Operational Advantages
The use of POM ensures long service life and high resistance to mechanical and chemical influences. The clear black labeling on a white background guarantees excellent readability. The self-closing design enables quick, tool-free installation, reducing work time. The packaging with 300 markers on 12 carrier rods offers efficient storage and handling.

The product is delivered in a packaging unit containing 12 pre-loaded carrier rods, totaling 300 markers. No additional components such as batteries or tools are included in the delivery scope.
Lieske Part No.: 102765

plus marker type PS-09 in white with black print 2. These markers are suitable for cable outer diameters of 3.2 to 4.5mm and cable cross-sections of 2.5mm². The material of the cable markers is POM. The color of the support rods is blue
Lieske Part No.: 102778

plus marker type PS-09 in white with black U print. These markers are suitable for cable outer diameters of 3.2 to 4.5mm and cable cross-sections of 2.5mm². The material of the cable markers is POM. The color of the support rods is blue
Lieske Part No.: 135720

plus marker type PS-09 in white with black V print. These markers are suitable for cable outer diameters of 3.2 to 4.5mm and cable cross-sections of 2.5mm². The material of the cable markers is POM. The color of the support rods is blue
Lieske Part No.: 135721

plus marker type PS-09 in white with black print W. These markers are suitable for cable outer diameters of 3.2 to 4.5mm and cable cross-sections of 2.5mm². The material of the cable markers is POM. The color of the support rods is blue
Lieske Part No.: 135722

plus marker type PS-12 in white with black print 1. These markers are suitable for cable outer diameters of 4.5 to 6.0mm and cable cross-sections of 4.0 to 6.0mm². The material of the cable markers is POM. The color of the support rods
Lieske Part No.: 102780

plus marker type PS-12 in white with black print 2. These markers are suitable for cable outer diameters of 4.5 to 6.0mm and cable cross-sections of 4.0 to 6.0mm². The material of the cable markers is POM. The color of the support rods
Lieske Part No.: 102781

Marker PLIO SNAP+ PS-12 0-9
Lieske Part No.: 1586103

plus marker type PS-12 in white with black U print. These markers are suitable for cable outer diameters of 4.5 to 6.0mm and cable cross-sections of 4.0 to 6.0mm². The material of the cable markers is POM. The color of the support rods
Lieske Part No.: 135724

plus marker type PS-12 in white with black imprint V. These markers are suitable for cable outer diameters of 4.5 to 6.0mm and cable cross-sections of 4.0 to 6.0mm². The material of the cable markers is POM. The color of the support rods
Lieske Part No.: 135725

plus marker type PS-12 in white with black print W. These markers are suitable for cable outer diameters of 4.5 to 6.0mm and cable cross-sections of 4.0 to 6.0mm². The material of the cable markers is POM. The color of the support rods
Lieske Part No.: 135726

plus marker type PS-15 in white with black print 0. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 770396

plus marker type PS-15 in white with black print 1. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 467500

plus marker type PS-15 in white with black print 2. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 467510

plus marker type PS-15 in white with black print 3. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 153330

plus marker type PS-15 in white with black print 4. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 467529

plus marker type PS-15 in white with black print 5. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 338799

plus marker type PS-15 in white with black print 6. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 467585

plus marker type PS-15 in white with black print 7. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 467587

plus marker type PS-15 in white with black print 8. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 402952

plus marker type PS-15 in white with black print 9. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 383223

plus marker type PS-15 in white with black print J. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit
Lieske Part No.: 540539

plus marker type PS-15. One packaging unit contains 5 support rods.
Lieske Part No.: 374201

plus marker type PS-17 in white with black print 1. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 505919

plus marker type PS-17 in white with black print 2. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 505764

plus marker type PS-17 in white with black print 3. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 505761

plus marker type PS-17 in white with black print 4. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 505727

plus marker type PS-17 in white with black print 5. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 505532

plus marker type PS-17 in white with black print 6. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 564682

plus marker type PS-17 in white with black print 7. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 564685

plus marker type PS-17 in white with black print 8. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 564701

plus marker type PS-17 in white with black print 9. These markers are suitable for cable outer diameters of 8.5 to 11.5mm and cable cross-sections of 25.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 564715

plus marker type PS-17. One packaging unit contains 5 support rods.
Lieske Part No.: 561097

plus marker type PS-21. One packaging unit contains 2 support rods.
Lieske Part No.: 1564718

plus marker type PS-01 in yellow with black print 0. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 466612

plus marker type PS-01 in yellow with black print 1. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 467201

plus marker type PS-01 in yellow with black print 2. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 467220

plus marker type PS-01 in yellow with black print 3. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 467227

plus marker type PS-01 in yellow with black print 4. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 467228

plus marker type PS-01 in yellow with black print 5. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 467326

plus marker type PS-01 in yellow with black print 6. These markers are suitable for cable outer diameters of 1.0 to 1.4mm and cable cross-sections of 0.32mm². The material of the cable markers is POM. The color of the support rods is brown
Lieske Part No.: 1323804

plus marker type PS-03 in yellow with black print -. These markers are suitable for cable outer diameters of 1.9 to 2.6mm and cable cross-sections of 0.75mm². The material of the cable markers is POM. The color of the support rods is green.
Lieske Part No.: 467603

plus marker type PS-03 in yellow with black print +. These markers are suitable for cable outer diameters of 1.9 to 2.6mm and cable cross-sections of 0.75mm². The material of the cable markers is POM. The color of the support rods is green
Lieske Part No.: 467387

plus marker type PS-03 in yellow with black print 0. These markers are suitable for cable outer diameters of 1.9 to 2.6mm and cable cross-sections of 0.75mm². The material of the cable markers is POM. The color of the support rods is green
Lieske Part No.: 809955

plus marker type PS-03 in yellow with black print 1. These markers are suitable for cable outer diameters of 1.9 to 2.6mm and cable cross-sections of 0.75mm². The material of the cable markers is POM. The color of the support rods is green
Lieske Part No.: 563386

plus marker type PS-03 in yellow with black print 2. These markers are suitable for cable outer diameters of 1.9 to 2.6mm and cable cross-sections of 0.75mm². The material of the cable markers is POM. The color of the support rods is green
Lieske Part No.: 871536