Insertable marking strip, 6mm, 10 positions 1, 10, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852473

Insertable marking strip, 6mm, 10 positions 91, 100, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852472

Insertable marking strip, 6mm, 10 positions 11 to 20, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852471

Insertable marking strip, 6mm, 10 positions 31, 40, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852439

Insertable marking strip, 6mm, 10 positions 41 to 50, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852483

Insertable marking strip, 6mm, 10 positions 51, 60, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852396

Insertable marking strip, 6mm, 10 positions 61, 70, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852409

Insertable marking strip, 6mm, 10 positions 71, 80, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852408

Insertable marking strip, 6mm, 10 positions 81, 90, horizontally printed, white.
Sales unit: 10 pieces
Lieske Part No.: 1852407

Marking accessory for Linergy TR products. It is a 6mm clip in marking strip for NSYTRV terminal blocks. It consists of L1, L2, L3, N, PE characters printed horizontally. It is compatible with all 4mm² and 6.2mm wide terminal blocks. It is also compatible with 16mm² terminal blocks with 2 marking elements for 1 terminal.
Sales unit: 10 pieces
Lieske Part No.: 1852406

Labeling insert, A4, white.
Sales unit: 10 pieces
Lieske Part No.: 1869485

Identification card, 50 inserts, white.
Sales unit: 10 pieces
Lieske Part No.: 1869475

Identification cuff, 2 to 3.5 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869502

Identification cuff, 3 to 5 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869477

Identification cuff, 5 to 8 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869478

Identification card, 6 strips, 5mm.
Sales unit: 50 pieces
Lieske Part No.: 1869479

Linergy label card for terminal block. It is compatible with the terminal block. It has a white surface treatment. It offers 6 strips, 5 mm, unprinted and 72 characters. Sold in batches of 10 units. It is compliant with Green Premium (RoHS/REACH).
Sales unit: 10 pieces
Lieske Part No.: 1852445

Marking card with 6 strips, 6mm, unprinted, 60 positions, white.
Sales unit: 10 pieces
Lieske Part No.: 1852444

Marking card with 6 strips, 8mm, unprinted, 42 positions, white.
Sales unit: 10 pieces
Lieske Part No.: 1852443

Harmony Relay. Label plate for attaching to the RXZE2 relay socket of the RXM miniature relays, except RXZE2M114 and RXZE2S114S.
Sales unit: 100 pieces
Lieske Part No.: 415115

3MT ScotchCodeT Leitungs-Marker-Dispenser mit Beschriftung sind kompakte und praktische Kabelmarkierungssysteme. Mit dem Dispenser können Sie mit einem Permanentmarker eigene, selbstlaminierende Etiketten schreiben.
Schreiben Sie maßgeschneiderte, selbstlaminierende Etiketten mit den 3MT ScotchCodeT Leitungs-Marker-Dispenser mit Beschriftung. Dieser einzigartige, ergonomisch entwickelte Dispenser besteht aus langlebigem Kunststoff, der die gestanzten Klebemarker schützt. Er enthält ein Klebeband mit einer transparenten Vinylfolie mit einem druckempfindlichen Acrylhaftklebstoff. Das Klebeband widersteht einem weiten Temperaturbereich von -40 °C bis 80 °C und ist damit ideal für industrielle elektrische Anwendungen. Geeignet für den Einsatz auf Fernsehern, Sicherheits- und Sprinklersystemen, Steckern, Schläuchen, Autoalarmanlagen, Schläuchen, Lüftungsöffnungen, Golfschlägern und mehr.
Sales unit: 10 pieces
Lieske Part No.: 148535

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 806668

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 323989

The MGO flexible magnetic tape is 1.55 mm thick and has a pressure-sensitive rubber adhesive.
Thanks to the high-performance adhesive on one of its sides, the MGO magnetic tape ensures the fixation, whether removable or not, of numerous supports. It is easy to attach, lift off, remove, store and reuse.
Sales unit: 5 pieces
Lieske Part No.: 313228

The STD Wire Marker Dispenser is a compact, convenient marking solution - available with pre-loaded number or color printed labels. This wire marker dispenser has 10 refillable compartments and comes complete with a full refill lead.
The wire marker dispenser features flip-top lids that allow you to peel and tear off precise lengths. This dispenser is pre-loaded with sharp, easy-to-read pre-printed numbers (0-9). It has 10 refillable compartments - each dispenser comes complete with a full refill lead.
Made from durable plastic, the dispenser protects wire markers from contamination and keeps them clean and dry. Its compact design fits conveniently in a pocket or toolbox - or can be hung from a tool bag or strap.
Lieske Part No.: 972546

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 531503

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 907778

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 556542

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 558195

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 287164

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 584647

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 225104

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 392539

The hazard warning tapes are printed, cold-resistant and adaptable adhesive tapes to warn of cables and lines
. The route warning tape is a cold-resistant and adaptable adhesive tape for marking cables and lines. It is available with the prints 'Caution cable' and 'Caution power cable' as standard. The tape is designed to be applied 40 centimeters above electrical, gas or water pipes. The bright yellow color alerts construction machine operators to cables and wires during excavation work to prevent them from being damaged. This warning tape is colorfast and permanently legible because it is coated with a clear varnish over the print.
Sales unit: 5 pieces
Lieske Part No.: 399780

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 396924

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 561315

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden by embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read in/from the marker.
The green 3MTEMS ball marker - wastewater makes marking and subsequently locating underground sewage pipes with the marker locators extremely easy. It can be located up to a maximum depth of 1.50 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal channels or pipes, fences or high-voltage lines.
Sales unit: 30 pieces
Lieske Part No.: 206183

Label holders and labels FB 201 for labeling cables and pipes with large diameters. The label holders are fixed using cable ties (width 4.7mm). The supplied white half-cardboard labels have the dimensions 30x6m
Sales unit: 100 pieces
Lieske Part No.: 909484

Label holder PLIO type M-008 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 251987

Label holder PLIO type M-012 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area measures 62x9.5mm (LxW) and can accommodate 12 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 262110

Label holder PLIO type M-024 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 122x9.5mm (LxW) and can accommodate 24 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 453489

Label holder PLIO type M-008 PVC in black for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 1324437

The label is attached using cable ties and can be labeled using the SES fiber pen. Laser labeling is available on request.
Sales unit: 100 pieces
Lieske Part No.: 1564719

Das Produkt Vettor CH-M PE 50x73 gelb von Ses-Sterling ist ein Prägeschild für die Kennzeichnung von Kabeln und Leitungen im Bereich der Elektro- und IT-Installation. Es handelt sich um ein Prägeschild aus Polyethylen (PE) in der Farbe Gelb, das speziell für die Verwendung mit der Kaltprägezange SES-VETTOR entwickelt wurde. Die Abmessungen betragen 50 mm in der Breite und 73 mm in der Höhe, was eine klare und gut lesbare Beschriftung ermöglicht. Die Schilder sind in einer Verpackungseinheit zu 100 Stück erhältlich, wodurch sie für größere Projekte oder Serienkennzeichnungen geeignet sind.

Einsatzbereiche
Die Prägeschilder CH-M PE YE finden Anwendung in der industriellen und gewerblichen Elektroinstallation, insbesondere bei der Kennzeichnung von Kabeln, Leitungen, Schaltanlagen und anderen elektrischen Komponenten. Die Farbe Gelb dient als visuelle Kennzeichnung und kann je nach internen oder branchenüblichen Normen für bestimmte Leitungstypen, Spannungsebenen oder Funktionen verwendet werden. Die Schilder sind für den Einsatz mit der Kaltprägezange SES-VETTOR konzipiert, wodurch eine saubere, dauerhafte und fehlerfreie Beschriftung ohne Hitze oder zusätzliche Klebemittel erfolgt.

Funktionen und Ausstattung im Detail
Die Schilder bestehen aus Polyethylen (PE), einem robusten und widerstandsfähigen Kunststoff, der für den Einsatz in industriellen Umgebungen geeignet ist. Die Materialwahl gewährleistet eine hohe Beständigkeit gegen mechanische Beanspruchung, Feuchtigkeit und geringe Temperatureinwirkungen. Die Gelb-Farbe ist klar definiert und ermöglicht eine schnelle optische Unterscheidung von anderen Kennzeichnungen. Die Schilder sind flach und rechteckig mit den Maßen 50x73 mm, was eine ausreichende Fläche für die Prägung von Texten, Zahlen oder Symbolen bietet. Die Verpackungseinheit umfasst 100 Stück, was für größere Installationen oder Serienkennzeichnungen vorteilhaft ist.

Technik verständlich erklärt
Die Prägung erfolgt mittels einer Kaltprägezange, bei der die Schilder durch Druck und Prägematrix beschriftet werden. Dabei wird kein Wärme- oder Klebeprozess benötigt, was die Gefahr von Schäden an empfindlichen Kabeln oder Leitungen minimiert. Die Kaltprägezange SES-VETTOR ist speziell für diese Schilder ausgelegt, wodurch eine präzise und saubere Prägung gewährleistet ist. Die Materialstärke des PE-Schilds sorgt dafür, dass die Prägung dauerhaft bleibt und nicht abgeplatzt oder verschwommen wird. Die Schilder sind nicht selbstklebend, sondern werden nach der Prägung manuell an die zu kennzeichnende Leitung oder Komponente angebracht.

Kompatibilität und Zubehör
Die Prägeschilder CH-M PE YE sind ausschließlich für die Kaltprägezange SES-VETTOR konzipiert. Die Schilder sind nicht mit einem Klebestreifen oder einer Haftbeschichtung versehen, sondern müssen nach der Prägung manuell befestigt werden.

Montage und Installation
Die Montage erfolgt in zwei Schritten: Zuerst wird der gewünschte Text oder Code mit der Kaltprägezange SES-VETTOR auf das Schild geprägt. Anschließend wird das Schild an der zu kennzeichnenden Leitung, Kabel oder Komponente befestigt. Die Befestigung erfolgt manuell, ohne zusätzliche Klebemittel oder Werkzeuge. Die Schilder sind nicht selbstklebend, sodass eine feste Verbindung durch Klemmen, Befestigungsklammern oder andere mechanische Halterungen erforderlich sein kann, je nach Anwendungsumgebung.

Vorteile im Betrieb
Die Verwendung der Prägeschilder CH-M PE YE bietet eine zuverlässige und dauerhafte Kennzeichnungsmethode, die ohne Hitze oder chemische Klebemittel auskommt. Die Gelb-Farbe ermöglicht eine schnelle visuelle Identifizierung, was die Wartung und Fehlerdiagnose im Betrieb erleichtert. Die Materialfestigkeit des PE-Schilds sorgt für eine lange Lebensdauer, auch unter industriellen Bedingungen. Die Verpackungseinheit mit 100 Stück ist für größere Projekte wirtschaftlich sinnvoll, da sie die Notwendigkeit häufiger Bestellungen reduziert. Die Kompatibilität mit der SES-VETTOR-Zange gewährleistet eine einheitliche und präzise Beschriftungsqualität über alle Schilder hinweg.
Sales unit: 100 pieces
Lieske Part No.: 499300

The nameplate is attached using cable ties and screws and can be labeled using the SES fiber pen, laser or blind embossing.
Sales unit: 100 pieces
Lieske Part No.: 1262386

Protective caps EPDM 15-378
Sales unit: 100 pieces
Lieske Part No.: 338851

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 1
Lieske Part No.: 229362

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 2
Lieske Part No.: 466994

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 3
Lieske Part No.: 467005

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 4
Lieske Part No.: 467025