Labeling, marking in Isolation / Identification

Identification card, 50 inserts, white.
Sales unit: 10 pieces
Lieske Part No.: 1869475

Identification cuff, 2 to 3.5 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869502

Identification cuff, 3 to 5 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869477

Identification cuff, 5 to 8 mm.
Sales unit: 500 pieces
Lieske Part No.: 1869478

Identification card, 6 strips, 5mm.
Sales unit: 50 pieces
Lieske Part No.: 1869479

Linergy label card for terminal block. It is compatible with the terminal block. It has a white surface treatment. It offers 6 strips, 5 mm, unprinted and 72 characters. Sold in batches of 10 units. It is compliant with Green Premium (RoHS/REACH).
Sales unit: 10 pieces
Lieske Part No.: 1852445

Marking card with 6 strips, 6mm, unprinted, 60 positions, white.
Sales unit: 10 pieces
Lieske Part No.: 1852444

Marking card with 6 strips, 8mm, unprinted, 42 positions, white.
Sales unit: 10 pieces
Lieske Part No.: 1852443

Harmony Relay. Label plate for attaching to the RXZE2 relay socket of the RXM miniature relays, except RXZE2M114 and RXZE2S114S.
Sales unit: 100 pieces
Lieske Part No.: 415115

Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 497806

Sales unit: 10 pieces
Lieske Part No.: 148535

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 806668

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 323989

The MGO flexible magnetic tape is 1.55 mm thick and has a pressure-sensitive rubber adhesive.
Thanks to the high-performance adhesive on one of its sides, the MGO magnetic tape ensures the fixation, whether removable or not, of numerous supports. It is easy to attach, lift off, remove, store and reuse.
Sales unit: 5 pieces
Lieske Part No.: 313228

The STD Wire Marker Dispenser is a compact, convenient marking solution - available with pre-loaded number or color printed labels. This wire marker dispenser has 10 refillable compartments and comes complete with a full refill lead.
The wire marker dispenser features flip-top lids that allow you to peel and tear off precise lengths. This dispenser is pre-loaded with sharp, easy-to-read pre-printed numbers (0-9). It has 10 refillable compartments - each dispenser comes complete with a full refill lead.
Made from durable plastic, the dispenser protects wire markers from contamination and keeps them clean and dry. Its compact design fits conveniently in a pocket or toolbox - or can be hung from a tool bag or strap.
Lieske Part No.: 972546

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 531503

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 907778

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 556542

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 558195

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 287164

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 584647

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 225104

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 392539

The hazard warning tapes are printed, cold-resistant and adaptable adhesive tapes to warn of cables and lines
. The route warning tape is a cold-resistant and adaptable adhesive tape for marking cables and lines. It is available with the prints 'Caution cable' and 'Caution power cable' as standard. The tape is designed to be applied 40 centimeters above electrical, gas or water pipes. The bright yellow color alerts construction machine operators to cables and wires during excavation work to prevent them from being damaged. This warning tape is colorfast and permanently legible because it is coated with a clear varnish over the print.
Sales unit: 5 pieces
Lieske Part No.: 399780

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 396924

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 561315

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden by embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read in/from the marker.
The green 3MTEMS ball marker - wastewater makes marking and subsequently locating underground sewage pipes with the marker locators extremely easy. It can be located up to a maximum depth of 1.50 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal channels or pipes, fences or high-voltage lines.
Sales unit: 30 pieces
Lieske Part No.: 206183

Label holders and labels FB 201 for labeling cables and pipes with large diameters. The label holders are fixed using cable ties (width 4.7mm). The supplied white half-cardboard labels have the dimensions 30x6m
Sales unit: 100 pieces
Lieske Part No.: 909484

Label holder PLIO type M-008 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 251987

Label holder PLIO type M-012 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area measures 62x9.5mm (LxW) and can accommodate 12 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 262110

Label holder PLIO type M-024 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 122x9.5mm (LxW) and can accommodate 24 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 453489

Label holder PLIO type M-008 PVC in black for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 1324437

The label is attached using cable ties and can be labeled using the SES fiber pen. Laser labeling is available on request.
Sales unit: 100 pieces
Lieske Part No.: 1564719

Prägeschilder CH-M PE YE in Größe 50x73mm in gelb für Kaltprägezange SES-VETTOR. Eine Verpackungseinheit beinhaltet 100 Schilder. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499300

The nameplate is attached using cable ties and screws and can be labeled using the SES fiber pen, laser or blind embossing.
Sales unit: 100 pieces
Lieske Part No.: 1262386

Protective caps EPDM 15-378
Sales unit: 100 pieces
Lieske Part No.: 338851

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 1
Lieske Part No.: 229362

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 2
Lieske Part No.: 466994

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 3
Lieske Part No.: 467005

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 4
Lieske Part No.: 467025

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 5
Lieske Part No.: 467106

Sales unit: 10 pieces
Lieske Part No.: 894774

SPOT-IT S 18/06 label card in yellow without frame, unlabeled. The dimensions of the labels are 18x6mm. There are 400 labels on one card. Packaging unit 10 cards.
Sales unit: 10 pieces
Lieske Part No.: 458386

Marking booklet SES-MARKERS type TAB 150 EV 25-150 contains 30 self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely covered by the overlapping foil.
Lieske Part No.: 458416

Marking booklet SES-MARKERS type TAB 75 EV 25-75 contains 60 self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely covered by the overlapping foil.
Lieske Part No.: 682987

20 strips of self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely protected by the overlapping film and is therefore also oil and slightly solvent resistant.
Lieske Part No.: 1313427

40 strips of self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely protected by the overlapping film and is therefore also oil and slightly solvent resistant.
Lieske Part No.: 458422

Kennzeichnungsschreiber Typ EV-permanent, Farbe schwarz mit mittlerer Spitze. Dieser Permanentmarker eigent sich zum Beschriften von Kennzeichnungsfeldern unserer SES-MARKERS Kennzeichnungskarten. Verkaufseinheit: 1 ST.
Lieske Part No.: 499436

Marking pen PLIO-780 opaque, white with fine tip. Packaging unit 1 piece
Lieske Part No.: 109025

HELAVIA-TWIN marking rings type HT-0. Yellow with black print 1. For cable outer diameters 1.2 to 2mm. The width of the rings is 3.8mm, the size of the print 1.8mm. Industrial pack of 1000 pieces.
Sales unit: 1000 pieces
Lieske Part No.: 1323566