Type: 140754

Lieske Part No.: 530962

Model: 140758 Package: 1 PC.
Lieske Part No.: 340584

Wire lead seal, Ø 8 mm, with cast-in spiral wire, 200 mm long, approx. 450 pieces, 1 kg
Lieske Part No.: 309898

Wire lead seal, Ø 10 mm, with cast-in spiral wire, 200 mm long, approx. 260 pieces, 1 kg
Lieske Part No.: 707814

Wire lead seal, Ø 12 mm, with cast-in spiral wire, 200 mm long, approx. 150 pieces, 1 kg
Lieske Part No.: 772700

Sealing wire, coil: 1/2 kg = approx. 115 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 571888

Sealing wire, coil: 1 kg = approx. 230 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 154479

Sealing wire, coil: 1/2 kg = approx. 190 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 493752

Sealing wire, coil: 1 kg = approx. 380 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 553058

Plastic-coated sealing wire, 100 m reel, blue, with a diameter of 0.5x0.6 mm, iron wire
Lieske Part No.: 722385

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 1, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 439094

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 2, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 461587

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 3, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 345982

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor N, blue, pieces per sheet: 10, PU: 1.
Lieske Part No.: 524775

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: PE protective conductor, green-yellow, pieces per sheet: 10, PU: 1.
Lieske Part No.: 429986

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor protective function, pieces per sheet: 10, PU: 1.
Lieske Part No.: 577072

Conductor marking, the self-adhesive film signs for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The signs comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, pieces per sheet: 10, PU: 1.
Lieske Part No.: 985053

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature-resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, not in accordance with DIN 40 011, pieces per sheet: 10, PU: 1.
Lieske Part No.: 900621

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 14 mm, pieces per block: 64, length: 75 mm, pack: 1
Lieske Part No.: 537030

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 38 mm, pieces per block: 32, length: 150 mm, pack: 1
Lieske Part No.: 364578

Selbstlaminierende Kabelmarkierer für die einfache, schnelle dauerhafte Kabelkennzeichnung. Kabelmarkierer für die einfache, schnelle und dauerhafte Kabelkennzeichnung.Klare PV 006, selbstklebende Weich-PVC-Folie, 0,08 mm stark. Schützt das Schriftfeld vor mechanischen Einflüssen. Der Markierer besteht aus patentiertem und transparentem Andruckteil, weißem Beschriftungsfeld, transparentem Schutzteil.Temperaturbeständig von -30°C bis +120°C, dauerhafte Klebekraft, hohe UV-Beständigkeit. Resistent gegen Schmutz, Wasser, Alkohol, Öle auf Petroleumbasis. Beschriftbar mit Bleistift, Kugelschreiber, Drucker usw. Taschenverpackung. Ausführung: Schriftfeld: 25x25 mm, Maximaler Kabel-¿ 63 mm, Stück pro Block: 32, Länge: 230 mm, VE: 1
Lieske Part No.: 1093355

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Sheet: 13x21 mm, Maximum cable diameter 7 mm, Pieces per block: 48, Length: 37 mm, PU: 1
Lieske Part No.: 672802

Selbstlaminierende Kabelmarkierer für die einfache, schnelle dauerhafte Kabelkennzeichnung. Kabelmarkierer für die einfache, schnelle und dauerhafte Kabelkennzeichnung.Klare PV 006, selbstklebende Weich-PVC-Folie, 0,08 mm stark. Schützt das Schriftfeld vor mechanischen Einflüssen. Der Markierer besteht aus patentiertem und transparentem Andruckteil, weißem Beschriftungsfeld, transparentem Schutzteil.Temperaturbeständig von -30°C bis +120°C, dauerhafte Klebekraft, hohe UV-Beständigkeit. Resistent gegen Schmutz, Wasser, Alkohol, Öle auf Petroleumbasis. Beschriftbar mit Bleistift, Kugelschreiber, Drucker usw. Taschenverpackung. Ausführung: Bogen: 25x24 mm, Maximaler Kabel-¿ 14 mm, Stück pro Block: 21, Länge: 80 mm, VE: 1
Lieske Part No.: 1096152

Labels for hand-writing, self-adhesive, writable labels made of yellow fabric for marking electrical systems, equipment labeling, warehouse and item labeling. Easy to write on with pencil, ballpoint pen and typewriter. Self-adhesive PVC-impregnated fabric in yellow with black border, 0.15 mm thick. Temperature resistant from -30°C to +80°C, good adhesive strength, ageing-resistant. Design: Pieces per card: 40, dimensions: 11x19 mm. PU: 1.
Lieske Part No.: 479960

Test stickers Test stickers are used as part of quality assurance (QA) DIN ISO 9000 ff and, for example, for legally required inspections and accident prevention (UVV). This applies in particular to the monitoring of test equipment, devices and systems as well as important supply lines (cables, pipes). You have two options for attaching the test stickers: directly on the device being tested or on one of the basic stickers offered, which is stuck onto the device. The test date is marked with a pen or notching pliers. The test stickers are made of forgery-proof document film, i.e. to protect against misuse, the sticker is irreversibly destroyed if anyone tries to remove it. Properties of the document film: The document film can be written on with a pencil, ballpoint pen, fiber pen or typewriter. It is 0.05 mm thick and is temperature-resistant from 30 degrees C to +80 degrees C. The adhesive strength is higher than the tear resistance of the film. It breaks when removed and is largely resistant to aging, weathering and light. It is also resistant to water, sea water, alcohol, aliphatic solvents and petroleum-based oils and fats. Flash red
Lieske Part No.: 906320

Basic labels - The self-adhesive basic label is made of white, writable plastic film that can be stuck on multiple times. It adheres well to clean surfaces and is destroyed when removed. The document film is resistant to water, aliphatic solvents and petroleum-based oils and fats. Design: Pieces per booklet: 25, dimensions: 92x40 mm, pack size: 1.
Lieske Part No.: 131374

Lieske Part No.: 1101509

Warning and information sign: Do not switch on, work is in progress
300x120mm
magnetic film
Lieske Part No.: 1186743

'Rechargeable lithium-ion battery
LabelManagerT 360D, 420Phlt'
Lieske Part No.: 1893639

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1262124

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642483

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642485

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642487

All-purpose label maker with a QWERTY keyboard / Promoartikel with suitcase: /
Lieske Part No.: 1344765

High-speed label printer with WI-FI® connectivity. Save time and print up to 71 labels per minute*
. Thermal printing technology - requires no ink or toner
. Built-in Wi-Fi® for wireless printing
. A single LabelWriterT Wireless on a network provides
label printing for everyone
. Use free DYMO® Label software to
quickly design and print labels from a Mac® or PC, or use
Microsoft® Office plugins to
print directly from Word, Excel® or Outlook®
. For even more features, download the free
DYMO® Connect app for smartphone, tablet and desktop
Lieske Part No.: 1948345

DYMO LabelWriter 550, label printer for up to 62 labels/minute, USB, 300 dpi. Direct thermal, for labels up to 60mm wide
Lieske Part No.: 2061719

Rhino embossed labels: 12mm wide stainless steel and aluminum labels - adhesive or non-adhesive - that are resistant to corrosion due to extreme weather and temperature conditions, chemicals and UV radiation.
Sales unit: 10 pieces
Lieske Part No.: 1262218

D1 label ribbon, 12mmx7m, blue on
white
Lieske Part No.: 778338

D1 label ribbon, 24mm x 7m, black on transparent.
Lieske Part No.: 264244

D1 label ribbon, 24mmx7m, black on
red
Lieske Part No.: 364844

Rhino 5200 in a sturdy hard case with quick access keys and graphic display with backlight for Rhino labels in 6 9 12 and 19mm including 19mm flex. white nylon tape, 12mm white vinyl tape and power supply and rechargeable lithium-ion battery
Lieske Part No.: 481436

LabelManager 420P ABC Keyboard (WE) Use it standalone - or connect it to your PC or Mac via USB and use DYMO Label software to print barcodes, logos, large quantities of labels from data files and much more. Large 4-line backlit display that lets you view text effects before printing 8 fonts 7 font sizes 10 text styles 8 frames and underlines With lithium-ion battery and power adapter for charging Uses DYMO D1 labels with a width of 6, 9, 12 and 19mm.
Lieske Part No.: 952171

Warning tape should be placed over buried cables and pipes, non-flame, Ld-PE labeled Caution Power Cable, type: FTWB item:
ST.
Lieske Part No.: 823018

QR code for use with the My HPlus service app. Contents 10 pieces
Lieske Part No.: 1920397

QR code for use with the My HPlus service app. Contents 100 pieces
Lieske Part No.: 1920396

My HPlus Service-IA KIT for acceptance and commissioning consisting of two information signs and one acceptance sign
Lieske Part No.: 1920395

RFID cable ties that can be detected using metal or X-ray machines (result depends on the respective application). Even individual sections can be located using metal pigments throughout the entire band. For safer and cleaner handling of production processes. Strong blue for clear identification during optical inspection. Flexible, contactless data communication. Clear identification of objects through clear numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Robust and resistant in harsh environments and against cleaning processes. Low frequency (LF/125 kHz) - write-protected. High frequency (HF/13.56 MHz) - rewritable. Thanks to the transponder, RFID cable ties offer an innovative solution for clear and fast product identification. Specially developed for applications where the material must be traceable in processes (metal and X-ray machines), these plastic cable ties also contain metal components. This combines the numerous advantages of a detectable cable band with RFID technology. This labeling solution is particularly suitable for securing, serializing, tracking and identifying products in the food and pharmaceutical industries.
Sales unit: 100 pieces
Lieske Part No.: 2048227

RFID cable ties that can be detected using metal or X-ray machines (result depends on the respective application). Even individual sections can be located using metal pigments throughout the entire band. For safer and cleaner handling of production processes. Strong blue for clear identification during optical inspection. Flexible, contactless data communication. Clear identification of objects through clear numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Robust and resistant in harsh environments and against cleaning processes. Low frequency (LF/125 kHz) - write-protected. High frequency (HF/13.56 MHz) - rewritable. Thanks to the transponder, RFID cable ties offer an innovative solution for clear and fast product identification. Specially developed for applications where the material must be traceable in processes (metal and X-ray machines), these plastic cable ties also contain metal components. This combines the numerous advantages of a detectable cable band with RFID technology. This labeling solution is particularly suitable for securing, serializing, tracking and identifying products in the food and pharmaceutical industries.
Sales unit: 100 pieces
Lieske Part No.: 2048226

Identification cable ties made of polyamide 6.6. For easy identification and simultaneous bundling. Direct labeling on site or after processing (pins T82S-BK/T82R-RD). Large selection of matching labels for thermal transfer printing also available. These cable ties are suitable for time-saving labeling during and after the assembly of cable harnesses.
Sales unit: 1000 pieces
Lieske Part No.: 1581904

Type: IT
8FL PA66 BK
ST
ST.
Sales unit: 100 pieces
Lieske Part No.: 782827