OTS40T3 Terminal cover snap-on mounting transparent plastic
Lieske Part No.: 472913

Cable marking sheet for self-labeling, 3 markers / sheet, dimensions 69 x 25 x 19mm
Sales unit: 100 pieces
Lieske Part No.: 1425141

Cable marking sheet for self-labeling, 3 markers / sheet, dimensions 127 x 25 x 25mm
Sales unit: 100 pieces
Lieske Part No.: 1425142

Labeling strip set, self-adhesive plastic strips and A4 paper labeling sheet for inserting into plastic strips, width 215mm, set of 9 pieces
Lieske Part No.: 560036

Lieske Part No.: 887428

Conductor and cable markings simplify installation and maintenance and help with troubleshooting.
Lieske Part No.: 303251

Barrier tape red/white
Lieske Part No.: 819826

Warning tape with monolingual print: Attention Cable
Lieske Part No.: 833181

Warning tape with monolingual print: Attention telecommunications cables
Sales unit: 10 pieces
Lieske Part No.: 388401

Warning tape with monolingual print: Attention high voltage cable
Sales unit: 10 pieces
Lieske Part No.: 436274

Sealing pliers with strap closure, 8 mm Ø, length 105 mm
Lieske Part No.: 224424

Engravings for seal stamps up to 3 letters
Lieske Part No.: 687500

Engravings for seal stamps each additional letter
Lieske Part No.: 938143

Plastic seal, Ø 9 mm, grey, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 994222

Plastic seal, Ø 10 mm, orange, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 661249

Plastic seal, Ø 12 mm, grey, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 722358

Model: 140752 Package: 1 MTR
Lieske Part No.: 593328

Type: 140754
Sales unit: 1 pc
Lieske Part No.: 530962

Model: 140758 Package: 1 PC.
Lieske Part No.: 340584

Wire lead seal, Ø 8 mm, with cast-in spiral wire, 200 mm long, approx. 450 pieces, 1 kg
Lieske Part No.: 309898

Wire lead seal, Ø 10 mm, with cast-in spiral wire, 200 mm long, approx. 260 pieces, 1 kg
Lieske Part No.: 707814

Wire lead seal, Ø 12 mm, with cast-in spiral wire, 200 mm long, approx. 150 pieces, 1 kg
Lieske Part No.: 772700

Sealing wire, coil: 1/2 kg = approx. 115 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 571888

Sealing wire, coil: 1 kg = approx. 230 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 154479

Sealing wire, coil: 1/2 kg = approx. 190 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 493752

Sealing wire, coil: 1 kg = approx. 380 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 553058

Plastic-coated sealing wire, 100 m reel, blue, with a diameter of 0.5x0.6 mm, iron wire
Lieske Part No.: 722385

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 1, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 439094

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 2, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 461587

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 3, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 345982

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor N, blue, pieces per sheet: 10, PU: 1.
Lieske Part No.: 524775

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: PE protective conductor, green-yellow, pieces per sheet: 10, PU: 1.
Lieske Part No.: 429986

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor protective function, pieces per sheet: 10, PU: 1.
Lieske Part No.: 577072

Conductor marking, the self-adhesive film signs for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The signs comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, pieces per sheet: 10, PU: 1.
Lieske Part No.: 985053

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature-resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, not in accordance with DIN 40 011, pieces per sheet: 10, PU: 1.
Lieske Part No.: 900621

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 14 mm, pieces per block: 64, length: 75 mm, pack: 1
Lieske Part No.: 537030

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 38 mm, pieces per block: 32, length: 150 mm, pack: 1
Lieske Part No.: 364578

Lieske Part No.: 1093355

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Sheet: 13x21 mm, Maximum cable diameter 7 mm, Pieces per block: 48, Length: 37 mm, PU: 1
Lieske Part No.: 672802

Lieske Part No.: 1096152

Labels for hand-writing, self-adhesive, writable labels made of yellow fabric for marking electrical systems, equipment labeling, warehouse and item labeling. Easy to write on with pencil, ballpoint pen and typewriter. Self-adhesive PVC-impregnated fabric in yellow with black border, 0.15 mm thick. Temperature resistant from -30°C to +80°C, good adhesive strength, ageing-resistant. Design: Pieces per card: 40, dimensions: 11x19 mm. PU: 1.
Lieske Part No.: 479960

Test stickers Test stickers are used as part of quality assurance (QA) DIN ISO 9000 ff and, for example, for legally required inspections and accident prevention (UVV). This applies in particular to the monitoring of test equipment, devices and systems as well as important supply lines (cables, pipes). You have two options for attaching the test stickers: directly on the device being tested or on one of the basic stickers offered, which is stuck onto the device. The test date is marked with a pen or notching pliers. The test stickers are made of forgery-proof document film, i.e. to protect against misuse, the sticker is irreversibly destroyed if anyone tries to remove it. Properties of the document film: The document film can be written on with a pencil, ballpoint pen, fiber pen or typewriter. It is 0.05 mm thick and is temperature-resistant from 30 degrees C to +80 degrees C. The adhesive strength is higher than the tear resistance of the film. It breaks when removed and is largely resistant to aging, weathering and light. It is also resistant to water, sea water, alcohol, aliphatic solvents and petroleum-based oils and fats. Flash red
Lieske Part No.: 906320

Inspection stickers 18 yellow
Lieske Part No.: 1021332

Basic labels - The self-adhesive basic label is made of white, writable plastic film that can be stuck on multiple times. It adheres well to clean surfaces and is destroyed when removed. The document film is resistant to water, aliphatic solvents and petroleum-based oils and fats. Design: Pieces per booklet: 25, dimensions: 92x40 mm, pack size: 1.
Lieske Part No.: 131374

Sales unit: 1 PC.
Lieske Part No.: 1101509

Warning and information sign: Do not switch on, work is in progress
300x120mm
magnetic film Sales unit: 1 ST.
Lieske Part No.: 1186743

'Rechargeable lithium-ion battery
LabelManagerT 360D, 420Phlt'
Lieske Part No.: 1893639

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1262124

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642483

Rhino tapes are designed for tough conditions and are resistant to abrasion, temperature changes, chemicals, solvents, water and UV radiation. DYMO offers several special materials depending on the application, all of which have a strong adhesive and a carefully selected ribbon for high quality print and durability.
Lieske Part No.: 1642485