Labeling, marking in Isolation / Identification

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 392539

The hazard warning tapes are printed, cold-resistant and adaptable adhesive tapes to warn of cables and lines
. The route warning tape is a cold-resistant and adaptable adhesive tape for marking cables and lines. It is available with the prints 'Caution cable' and 'Caution power cable' as standard. The tape is designed to be applied 40 centimeters above electrical, gas or water pipes. The bright yellow color alerts construction machine operators to cables and wires during excavation work to prevent them from being damaged. This warning tape is colorfast and permanently legible because it is coated with a clear varnish over the print.
Sales unit: 5 pieces
Lieske Part No.: 399780

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 10 pieces
Lieske Part No.: 396924

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 561315

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden by embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read in/from the marker.
The green 3MTEMS ball marker - wastewater makes marking and subsequently locating underground sewage pipes with the marker locators extremely easy. It can be located up to a maximum depth of 1.50 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal channels or pipes, fences or high-voltage lines.
Sales unit: 30 pieces
Lieske Part No.: 206183

Label holders and labels FB 201 for labeling cables and pipes with large diameters. The label holders are fixed using cable ties (width 4.7mm). The supplied white half-cardboard labels have the dimensions 30x6m
Sales unit: 100 pieces
Lieske Part No.: 909484

Label holder PLIO type M-008 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 251987

Label holder PLIO type M-012 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area measures 62x9.5mm (LxW) and can accommodate 12 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 262110

Label holder PLIO type M-024 PE in natural for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 122x9.5mm (LxW) and can accommodate 24 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 453489

Label holder PLIO type M-008 PVC in black for our label rings PLIO-M-MARKERS M-65. The labeling area has the dimensions 42x9.5mm (LxW) and can accommodate 8 rings per label holder. Packaging unit 100 pieces
Sales unit: 100 pieces
Lieske Part No.: 1324437

The label is attached using cable ties and can be labeled using the SES fiber pen. Laser labeling is available on request.
Sales unit: 100 pieces
Lieske Part No.: 1564719

Prägeschilder CH-M PE YE in Größe 50x73mm in gelb für Kaltprägezange SES-VETTOR. Eine Verpackungseinheit beinhaltet 100 Schilder. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499300

The nameplate is attached using cable ties and screws and can be labeled using the SES fiber pen, laser or blind embossing.
Sales unit: 100 pieces
Lieske Part No.: 1262386

Protective caps EPDM 15-378
Sales unit: 100 pieces
Lieske Part No.: 338851

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 1
Lieske Part No.: 229362

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 2
Lieske Part No.: 466994

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 3
Lieske Part No.: 467005

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 4
Lieske Part No.: 467025

Marking card SES-MARKERS E 38, white, for cable diameters up to 12mm. Imprint 5
Lieske Part No.: 467106

Sales unit: 10 pieces
Lieske Part No.: 894774

SPOT-IT S 18/06 label card in yellow without frame, unlabeled. The dimensions of the labels are 18x6mm. There are 400 labels on one card. Packaging unit 10 cards.
Sales unit: 10 pieces
Lieske Part No.: 458386

Marking booklet SES-MARKERS type TAB 150 EV 25-150 contains 30 self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely covered by the overlapping foil.
Lieske Part No.: 458416

Marking booklet SES-MARKERS type TAB 75 EV 25-75 contains 60 self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely covered by the overlapping foil.
Lieske Part No.: 682987

20 strips of self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely protected by the overlapping film and is therefore also oil and slightly solvent resistant.
Lieske Part No.: 1313427

40 strips of self-adhesive cable marking strips with a white labeling field for individual labeling by hand. The labeling field is completely protected by the overlapping film and is therefore also oil and slightly solvent resistant.
Lieske Part No.: 458422

Kennzeichnungsschreiber Typ EV-permanent, Farbe schwarz mit mittlerer Spitze. Dieser Permanentmarker eigent sich zum Beschriften von Kennzeichnungsfeldern unserer SES-MARKERS Kennzeichnungskarten. Verkaufseinheit: 1 ST.
Lieske Part No.: 499436

Marking pen PLIO-780 opaque, white with fine tip. Packaging unit 1 piece
Lieske Part No.: 109025

HELAVIA-TWIN marking rings type HT-0. Yellow with black print 1. For cable outer diameters 1.2 to 2mm. The width of the rings is 3.8mm, the size of the print 1.8mm. Industrial pack of 1000 pieces.
Sales unit: 1000 pieces
Lieske Part No.: 1323566

Industrial pack of 1000 pieces.
Sales unit: 1000 pieces
Lieske Part No.: 467128

Industrial pack of 1000 pieces.
Sales unit: 1000 pieces
Lieske Part No.: 467139

Industrial pack of 1000 pieces.
Sales unit: 1000 pieces
Lieske Part No.: 467157

Identification rings HELAVIA-TWIN type HT-0. Color yellow with black print 1. For cable outer diameters 1.2 to 2mm. The width of the rings is 3.8mm, the size of the print 1.8mm. Small pack of 100 pieces.
Sales unit: 100 pieces
Lieske Part No.: 1323565

Marking rings PLIO-V-MARKERS type V-37. Color pink with black print A. For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of soft PVC, in caterpillar shape and
Sales unit: 500 pieces
Lieske Part No.: 692506

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1323564

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324467

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324466

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324449

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324464

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324450

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324462

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324461

Marking rings PLIO-V-MARKERS type V-30. Black with white print 0 (international color code). For cable outer diameter 2.1 to 2.8mm. For cable cross-section 0.75 to 1mm². Our marking rings PLIO-V-MARKERS are made of white
Sales unit: 1000 pieces
Lieske Part No.: 1324460

For cable outer diameters of 2.1 to 2.8mm. For cable cross-sections of 0.75 to 1mm². Our PLIO-V-MARKERS marking rings are made of soft PVC, in a bead shape and pre-cut. Packaging unit 1000 rings.
Sales unit: 1000 pieces
Lieske Part No.: 1324459

Marking rings PLIO-V-MARKERS type V-37. Color white with black print 9 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of
Sales unit: 500 pieces
Lieske Part No.: 692596

Marking rings PLIO-V-MARKERS type V-37. Color blue with white print 6 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of white
Sales unit: 500 pieces
Lieske Part No.: 692647

Marking rings PLIO-V-MARKERS type V-37. Color green with black print 5 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of
Sales unit: 500 pieces
Lieske Part No.: 506699

Marking rings PLIO-V-MARKERS type V-37. Color yellow with black print 4 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of
Sales unit: 500 pieces
Lieske Part No.: 506553

Marking rings PLIO-V-MARKERS type V-37. Color orange with black print 3 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are also
Sales unit: 500 pieces
Lieske Part No.: 506506

Marking rings PLIO-V-MARKERS type V-37. Colour brown with white print 1 (international colour code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of white
Sales unit: 500 pieces
Lieske Part No.: 506319

Marking rings PLIO-V-MARKERS type V-37. Color red with white print 2 (international color code). For cable outer diameter 2.3 to 3.4mm. For cable cross-section 1 - 1.5 - 2.5mm². Our marking rings PLIO-V-MARKERS are made of soft
Sales unit: 500 pieces
Lieske Part No.: 506199