Offene Ringschraube mit je 2 Muttern und Unterlegscheiben Element zur Befestigung von Leuchten an Knotenketten Material: Stahl, verzinkt Verkaufseinheit: 1 ST.
Lieske Part No.: 1244260

Sales unit: 1 ST.
Lieske Part No.: 2021978

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 300 pieces
Lieske Part No.: 2022259

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 250 pieces
Lieske Part No.: 2022260

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 150 pieces
Lieske Part No.: 2022261

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 100 pieces
Lieske Part No.: 2022262

The grey double plug hook is suitable for attaching one or two cables, each with a diameter of 4-12 mm. It can be inserted into a 6 mm drill hole without tools and is therefore used for quick and easy attachment by hand, without screwing or hammering. The double plug hook can be used to attach several diameters at once. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The double plug hook is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of performance properties and is UV-resistant.
Sales unit: 200 pieces
Lieske Part No.: 2022270

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022274

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022275

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022276

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022277

The impact/nail/screw dowel is an absolute all-rounder for all surfaces and can also be used for concrete, hollow blocks, plasterboard and aerated concrete. The pre-assembled screw saves time during installation. The galvanized nail has an impact-protected Phillips slot. The dowel is made of nylon with a flat collar and is therefore tear-resistant, heat- and cold-resistant and age-resistant.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 600-700 N/mm2
Sales unit: 200 pieces
Lieske Part No.: 2022483

Sales unit: 1 PC.
Lieske Part No.: 1101899

VX insulation cap, for screw head
Lieske Part No.: 1441672

Applications: For retrospective insertion into the Maxi-PLS busbar section
Packs of: 15 pc(s).
EAN: 4028177238787
Customs tariff number: 74199990
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC000096

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Thread: M6
Weight/pack: 0.14 kg
Lieske Part No.: 837012

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 5.5 to 10.5 mm Ø, strain relief max. 2.5 kN, for self-supporting aerial cables, - hook diameter: 20 mm, - maximum tensile load 2.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 366629

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 8.5 to 13.5 mm Ø, strain relief max. 3.5 kN, for self-supporting aerial cables, - hook diameter: 26 mm, - maximum tensile load 3.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 618475

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 16.5 to 24.0 mm Ø, strain relief max. 7.5 kN, for self-supporting aerial cables, - hook diameter: 36 mm, - maximum tensile load 7.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 667591

Collar washer for covering screw heads type TTI-KB. Disc washers for covering the screw heads inside the installation ducts to protect simply insulated cables. Material PE.
Sales unit: 100 pieces
Lieske Part No.: 1860597

Spacial CRN, 100 pcs. Clip nuts. ISO thread M4. Mounting accessories. For support rails AM1-ED. Mounting bracket 35 mm asymmetrical rail, 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584532

Spacial CRN, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories for support rails AM1-DP. Mounting bracket 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584536

Sliding nut diameter -.
Sales unit: 100 pieces
Lieske Part No.: 585296

Spacial SM, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: channel bracket, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580177

Spacial SM, 100 pcs. Clip nuts. ISO thread M6. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: fastening tab, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580181

M8 Combiplas sliding nut for C-shaped rail 40 mm (type C40) - Delivery: 50 units.
Lieske Part No.: 1869093

M4 standard nut for vertical aluminum rails - Scope of delivery: 100 pieces.
Lieske Part No.: 1869581

100 screws S3D for cable entry plate.
Lieske Part No.: 1859455

Base with rivet for SES-QUICK cable ties are inserted into an existing hole and secured with a rivet. This base has flame retardancy V2 according to UL94, is halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 263297

SES Schrauben aus Polyamid 6.6 mit Gewinde nach ISO sind zur Befestigung von Kabelbindern, Kabelschellen oder anderem Kabelzubehör geeignet.Die Schrauben sind überall dort geeignet, wo Metallschrauben nicht verwendet werden können oder dürf Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499444

SES Schrauben aus Polyamid 6.6 mit Gewinde nach ISO sind zur Befestigung von Kabelbindern, Kabelschellen oder anderem Kabelzubehör geeignet.Die Schrauben sind überall dort geeignet, wo Metallschrauben nicht verwendet werden können oder dürf Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499445

SES Schrauben aus Polyamid 6.6 mit Gewinde nach ISO sind zur Befestigung von Kabelbindern, Kabelschellen oder anderem Kabelzubehör geeignet.Die Schrauben sind überall dort geeignet, wo Metallschrauben nicht verwendet werden können oder dürf Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499447

PLIO-GT 35 expanding rivets made of POM for quick fastening of our wiring duct. Halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 615349

Type: 06350011010
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 370414

PLIO-GS 60 expanding rivets made of PA6.6 for quick fastening of our wiring duct. Halogen-free and RoHS compliant.
Sales unit: 100 pieces
Lieske Part No.: 745405

Renovation luminaire insert 31 Gen.2, luminaire insert, made of extruded aluminum profile, painted, traffic white (RAL 9016), length: 1,438 mm, width: 91 mm, height: 53 mm, LED rated luminous flux: 8,900 lm, light color: 840, ballast: DALI 2, with system connection: socket, through-wiring: 7x 2.5mm², mains connection: 220..240 V, AC, 50/60 Hz, rated power: 53 W, primary light control with lens, made of plastic, primary light-technical cover: cover, made of PMMA, light emission: direct beam, protection type (total): IP20, protection class (total): SK I (protective earthing), test mark: CE, UKCA, impact resistance: IK02, permissible ambient temperature for indoor areas: -20..+40 ° C
Lieske Part No.: 1104121

Renovation luminaire insert 31 Gen.2, luminaire insert, made of extruded aluminum profile, painted, traffic white (RAL 9016), length: 1,438mm, width: 91mm, height: 53mm, LED rated luminous flux: 8,000lm, light color: 840, ballast: ON/OFF multilumen, with system connection: socket, through-wiring: 5x 2.5mm², mains connection: 220..240V, AC, 50/60Hz, rated power: 50W, connected load depending on luminous flux setting (25/34/42/50W), luminous flux on the luminaire adjustable in four levels (4130/5610/6850/8000lm), primary light control with lens, made of plastic, primary lighting technology. Cover: cover, made of PMMA, light emission: direct beam, protection type (total): IP20, protection class (total): SK I (protective earthing), test mark: CE, UKCA, impact resistance: IK02, permissible ambient temperature for indoor areas: -20..+40°C
Lieske Part No.: 1104122

Monsun 11/21Mounting clip, attachment
Lieske Part No.: 1925844

Renovation luminaire insert 31Mounting clip, surface-mounted
Lieske Part No.: 679160

Renovation luminaire insert 31 TThrough-wiring, installation
Lieske Part No.: 1104112

Renovation luminaire insert 31 T feed
Lieske Part No.: 1104114

Renovation luminaire insert 31 TOutput
Lieske Part No.: 110412

Sales Unit: 1 ST.
Lieske Part No.: 833066

Sales Unit: 1 ST.
Lieske Part No.: 808700

Sales Unit: 1 ST.
Lieske Part No.: 832922

Threaded pipe material: brass, bare Thread: M10x1 Length: 10mm Colour: other Material: brass Length: 10mm Screw thread over the full length: Jam Dimension: 1mm
Lieske Part No.: 466071

Threaded pipe material: brass, bare Thread: M10x1 Length: 12mm Material: brass Color: other Length: 12mm Dimension: 1mm Screw thread over the full length: Yes
Lieske Part No.: 368807

Threaded pipe material: brass, bare thread: M10x1 length: 15mm, material: brass, colour: other, length: 15mm, dimension: 1mm, screw thread over the full length: yes
Lieske Part No.: 534806

Threaded pipe material: brass, bare thread: M10x1 length: 18mm, material: brass, colour: other, length: 18mm, dimension: 1mm, screw thread over the full length: yes
Lieske Part No.: 135339

Threaded pipe material: brass, bare thread: M10x1 length: 20mm, material: brass, colour: other, length: 20mm, dimension: 1mm, screw thread over the full length: yes
Lieske Part No.: 950162

Threaded pipe material: brass, bare thread: M10x1 length: 25mm, length: 25mm, colour: other, material: brass, dimension: 1mm, screw thread over the full length: yes
Lieske Part No.: 798968