Rope Ø 2 - 6 mm: Round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: Round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 152897

Rope Ø 2 - 6 mm: Round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: Round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 913278

Steel wire tensioning ropes
Galvanized, with hemp core. Size 3 - 6 6x 7-wire
DIN 3055th Size 7-10: 6x19-wire to
DIN 3060
St bare steel
Design: Cable Ø 3 mm
Breaking load: 5.38 kN

Type: 957/3MM
Item: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 188231

Galvanized steel wire tensioning rope with fiber core (hemp core).
Rope Ø 2 - 6 mm: round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 810693

Galvanized steel wire tensioning ropes with fiber core. Size 3 - 6 6x 7-wire 3 according to DIN 55 Size 7 -
: 6x
9-wire DIN 3 6 St steel, natural finish: cable Ø 5 mm Breaking load:
5 kN Type: 957/5MM item: 5 MTR
Sales unit: 50 meters
Lieske Part No.: 875084

Galvanized steel wire tensioning rope with fiber core (hemp core).
Rope Ø 2 - 6 mm: round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 101589

Galvanized steel wire tensioning rope with fiber core (hemp core).
Rope Ø 2 - 6 mm: round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 650534

Galvanized steel wire tensioning rope with fiber core (hemp core).
Rope Ø 2 - 6 mm: round strand rope 6 x 7 according to DIN 3055.
Rope Ø 8 - 10 mm: round strand rope 6 x 19 according to DIN 3060.
Minimum breaking strength 1770 N/mm².
Sales unit: 50 meters
Lieske Part No.: 621235

. with 10.2 mm bore
. with M10 thread
. including pre-assembled M10 nut and spring washer
. complies with the requirements of VDE 0185-305 (IEC 62305)
Sales unit: 20 pieces
Lieske Part No.: 983699

Rung holder for fastening rungs of type MS4022 in IS 8 posts.
Sales unit: 5 pieces
Lieske Part No.: 259910

Flat head screw with hexagon socket for connecting the lower part and cross member of the symmetrical floor support BSS, to be used with the walkable cable tray system BKRS.
Sales unit: 100 pieces
Lieske Part No.: 2069720

Self-tapping screw with lens head according to form F and Torx drive, based on DIN EN ISO 7049, for fastening protective plates to the Z-supports for the walkable cable tray system.
Sales unit: 100 pieces
Lieske Part No.: 2069721

Stackable spacer for height compensation between different component heights.
Sales unit: 100 pieces
Lieske Part No.: 463251

Round head screw with square neck including combination nut.
Sales unit: 100 pieces
Lieske Part No.: 417009

Connecting sleeve with continuous internal thread.
Lieske Part No.: 551883

Hexagon screw for universal fastening of structural components. Includes hexagon nut and 2 washers.
Sales unit: 20 pieces
Lieske Part No.: 965033

Hexagon screw for universal fastening of structural components. Includes hexagon nut and 2 washers.
Sales unit: 20 pieces
Lieske Part No.: 313683

Gewindestange als Ersatzteil für die Höhennivellierung der UZD 250/350. Verkaufseinheit: 5 ST.
Lieske Part No.: 843587

Bracket
Lieske Part No.: 1060133

Mounting aid for R1000 series sensors, quick clamping and adjustment device
Lieske Part No.: 1062393

Schrauben Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 2144981

Flat nut, screw mounting, M10 x 0.75, alternative product according to RoHS II without exception 6c (Pb < 0.1 %) Item no.: 1239005
Sales unit: 10 pieces
Lieske Part No.: 1877012

M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers
Sales unit: 10 pieces
Lieske Part No.: 145800

Kreuzverbinder nach DIN 48852, Teil 3, für Tiefenerder Eisen, feuerverzinkt zum Anschluss eines ungeschnittenen Erdleiters 1 x Runddraht 10 mm ø oder 1 x Bandeisen 30 mm breit an Tiefenerder Verkaufseinheit: 1 ST.
Lieske Part No.: 1244341

Offene Ringschraube mit je 2 Muttern und Unterlegscheiben Element zur Befestigung von Leuchten an Knotenketten Material: Stahl, verzinkt Verkaufseinheit: 1 ST.
Lieske Part No.: 1244260

Sales unit: 1 ST.
Lieske Part No.: 2021978

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 300 pieces
Lieske Part No.: 2022259

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 250 pieces
Lieske Part No.: 2022260

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 150 pieces
Lieske Part No.: 2022261

Suitable for quickly attaching cables in wall slots or on the masonry before plastering. Several cables can be attached in one operation. The cables are therefore taut on the masonry and fit into all wall slots.
Sales unit: 100 pieces
Lieske Part No.: 2022262

The grey double plug hook is suitable for attaching one or two cables, each with a diameter of 4-12 mm. It can be inserted into a 6 mm drill hole without tools and is therefore used for quick and easy attachment by hand, without screwing or hammering. The double plug hook can be used to attach several diameters at once. The temperature resistance is 80 °C long-term, 130 °C short-term, -10 °C during assembly and +40 °C during use. The double plug hook is flame-retardant according to UL 84HB. The product can be used under UV exposure in dry and humid climates for at least five years without loss of performance properties and is UV-resistant.
Sales unit: 200 pieces
Lieske Part No.: 2022270

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022274

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022275

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022276

The hook nail is made of special electrical steel with a high carbon content and is suitable for fastening pipes or frames. The extremely high toughness and breaking strength ensure absolute safety during processing. The product is galvanized and thus protected against corrosion.
Sales unit: 250 pieces
Lieske Part No.: 2022277

The impact/nail/screw dowel is an absolute all-rounder for all surfaces and can also be used for concrete, hollow blocks, plasterboard and aerated concrete. The pre-assembled screw saves time during installation. The galvanized nail has an impact-protected Phillips slot. The dowel is made of nylon with a flat collar and is therefore tear-resistant, heat- and cold-resistant and age-resistant.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 600-700 N/mm2
Sales unit: 200 pieces
Lieske Part No.: 2022483

Sales unit: 1 PC.
Lieske Part No.: 1101899

VX insulation cap, for screw head
Lieske Part No.: 1441672

Applications: For retrospective insertion into the Maxi-PLS busbar section
Packs of: 15 pc(s).
EAN: 4028177238787
Customs tariff number: 74199990
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC000096

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Thread: M6
Weight/pack: 0.14 kg
Lieske Part No.: 837012

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 5.5 to 10.5 mm Ø, strain relief max. 2.5 kN, for self-supporting aerial cables, - hook diameter: 20 mm, - maximum tensile load 2.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 366629

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 8.5 to 13.5 mm Ø, strain relief max. 3.5 kN, for self-supporting aerial cables, - hook diameter: 26 mm, - maximum tensile load 3.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 618475

Tension clamp, housing made of sheet steel, hot-dip galvanized, clamping range 16.5 to 24.0 mm Ø, strain relief max. 7.5 kN, for self-supporting aerial cables, - hook diameter: 36 mm, - maximum tensile load 7.5 KN, - housing made of sheet steel, hot-dip galvanized, - clamping jaws and guide clamps made of glass fiber reinforced PA (black)
Lieske Part No.: 667591

Collar washer for covering screw heads type TTI-KB. Disc washers for covering the screw heads inside the installation ducts to protect simply insulated cables. Material PE.
Sales unit: 100 pieces
Lieske Part No.: 1860597

Spacial CRN, 100 pcs. Clip nuts. ISO thread M4. Mounting accessories. For support rails AM1-ED. Mounting bracket 35 mm asymmetrical rail, 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584532

Spacial CRN, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories for support rails AM1-DP. Mounting bracket 35 mm symmetrical rail. Clip-on nut.
Sales unit: 100 pieces
Lieske Part No.: 584536

Sliding nut diameter -.
Sales unit: 100 pieces
Lieske Part No.: 585296

Spacial SM, 100 pcs. Clip nuts. ISO thread M5. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: channel bracket, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580177

Spacial SM, 100 pcs. Clip nuts. ISO thread M6. Mounting accessories. Device short name AM3EC AM3MU. Clip-on nut. Accessories included with the housing: fastening tab, pre-slotted mounting plates (Telequick).
Sales unit: 100 pieces
Lieske Part No.: 580181

M8 Combiplas sliding nut for C-shaped rail 40 mm (type C40) - Delivery: 50 units.
Lieske Part No.: 1869093

M4 standard nut for vertical aluminum rails - Scope of delivery: 100 pieces.
Lieske Part No.: 1869581